Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware kit designed for cabinet applications where the door slides back into the cabinet. This pocket door hardware uses an overlay pocket door system so the door overlays the cabinet front, which lets you design face frames or frameless cabinets around visible fronts. The kit is specified for a minimum cabinet depth of 24-1/2 inches, so it suits cabinets built to that depth or deeper where full door retraction is needed. Supported door height ranges from 35-7/16 inches to 47-1/4 inches, which defines the workable door size window for this system on media or storage cabinets. Four slides manage door travel, distributing movement over multiple points so the door tracks straight as it moves. An overlay damper unit with an adjustment screw manages the final movement, giving controlled closing that helps protect the door and cabinet front in everyday use.
This overlay pocket door hardware kit is specified for a minimum cabinet depth of 24-1/2 inches, which sets the base carcass dimension needed so the door can retract fully into the cabinet. The stated door height range of 35-7/16 inches to 47-1/4 inches defines the vertical size that works with the hinge layout, slide travel, and synchronized board. Overlay amount up to 3/8 inch establishes the front offset you work to when boring and mounting the door, which simplifies planning for reveals and panel alignment. Door alignment adjustability designed into the overlay pocket door system supports fine corrections after mounting, which helps deliver even gaps around the door without re-drilling. The overlay damper unit with adjustment screw lets you tune damping behavior once the door is hung, so you can match closing feel to the specific door within the specified height range.
This pocket door hardware kit from Sugatsune America fits cabinet projects that can meet the minimum cabinet depth of 24-1/2 inches, such as media centers, storage cabinets, or workstations built to that depth. The height range of 35-7/16 inches to 47-1/4 inches targets doors tall enough for equipment or storage access while remaining within the system design limits. Because the system is an overlay pocket door system, it works in layouts where the door is intended to overlap the cabinet front by up to 3/8 inch, which suits frameless and face-frame styles designed around overlay faces. Fittings that retract the door further into the cabinet than the ALTST20-D10 series support applications needing deeper internal clearance, such as cabinets in multimedia and workspace components where front doors must clear internal hardware or screens when open.
The door alignment adjustability in this overlay pocket door kit allows small positional changes after the main components are installed, which supports repeatable results when multiple identical cabinets are built. The overlay amount up to 3/8 inch sets a consistent reference for layout, so boring patterns and hinge positions can be standardized around that overlay dimension. An overlay damper unit with an adjustment screw gives a built-in method to fine-tune closing behavior, which reduces the need to modify door construction to change damping response. Four slides guided by the synchronized board coordinate door motion, which helps the door move squarely while retracting further into the cabinet than the ALTST20-D10 series. By using a defined height range and cabinet depth, this pocket door hardware system groups door and carcass dimensions into a predictable set, which supports efficient fabrication and reduces fitting time on site.
The overlay pocket door kit is specified for a minimum cabinet depth of 24-1/2 inches, which provides the space needed for the door to retract fully into the cabinet.
The system is designed for doors from 35-7/16 inches to 47-1/4 inches in height, aligning the slides, hinges, and synchronized board to that vertical dimension range.
The kit supports an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door face can overlap the cabinet front for planning reveals and alignment.
Door alignment adjustability lets you shift door position slightly after mounting, which helps achieve even gaps and consistent overlay without changing the cabinet drilling pattern.
Fittings that retract the door further into the cabinet than the ALTST20-D10 series increase internal clearance, which helps keep the door clear of equipment or stored items when open.
The overlay damper unit uses an adjustment screw to vary damping force, which allows the closing action to be tuned to the door size within the specified height range.
This Sugatsune overlay pocket door kit, ALT-ST15-D10L-24, brings an overlay pocket door system with defined geometry into cabinet projects needing doors that retract into a 24-1/2 inch deep cabinet. With door height coverage from 35-7/16 inches to 47-1/4 inches, four slides, and further door retraction than the ALTST20-D10 series, it offers a clear dimensional framework for planning. Door alignment adjustability and an overlay damper unit with an adjustment screw provide built-in fine-tuning tools. For cabinet work that matches these dimensions and overlay needs, this pocket door hardware kit aligns the door, carcass depth, and movement into a coordinated solution.
