Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 16-9/16", Door Height 19-11/16" - 27-9/16", 2-Slides, Further Door Retraction, - ALT-ST15-D10S-16
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware system designed for overlay cabinet doors, giving installers a defined solution for cabinets that need doors to retract out of the way. The system is classified as pocket door hardware, so it is built specifically for pocket-style cabinet applications rather than general drawer slides. Minimum cabinet depth is 16-9/16 inches, which sets the cabinet design requirement and helps plan the carcass depth during layout. The kit suits door heights from 19-11/16 inches to 27-9/16 inches, covering a defined range of smaller cabinet doors typically found in multimedia, workspace, or organizational cabinetry. Two slides are used in this system, providing a guided track for the pocket door motion so the door moves consistently along both sides. The product is manufactured by Sugatsune America with part number ALT-ST15-D10S-16, giving a precise reference for repeat orders and matching to technical documentation on future jobs.
Overlay Pocket Door Features That Support Projects
- The overlay pocket door system is designed specifically for overlay applications, so the door covers the cabinet face as intended while still retracting, which is useful for clean fronts on multimedia or workspace cabinets.
- Door alignment adjustability is built into the system, allowing fine-tuning of the door position after mounting so reveals can be balanced and any minor construction variation can be addressed without rebuilding casework.
- Overlay amount is up to 3/8 inch, or 10 mm, which defines how far the door can sit over the cabinet front and guides face-frame or frameless layouts when planning overlays and adjacent front spacing.
- An overlay damper unit with an adjustment screw is part of the system, giving a controlled motion and letting the installer adjust the damping action so the door movement better matches the weight and use pattern.
- The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases the clear opening in front of the cabinet and helps keep the door deeper inside the cabinet when open.
Cabinet Depth And Door Range For Installation
The overlay pocket door system requires a minimum cabinet depth of 16-9/16 inches, which defines the interior space needed for the door to slide fully back and helps avoid interference with rear panels or stored items. The door height range of 19-11/16 inches to 27-9/16 inches sets clear limits for door sizing, so doors can be fabricated to match the hardware capability without trial-and-error. Two slides in the system work together with the synchronized board to guide door travel, promoting smoother movement as the door transitions from closed to fully retracted. This defined geometry supports repeatable installation steps across multiple cabinets built to the same dimensions on a project.
How This Pocket Door Hardware Works In Use
Where The Overlay Pocket Door System Fits Best
The overlay pocket door system from Sugatsune America belongs to the pocket door slides category for multimedia and workspace components, placing it naturally in projects where equipment or work surfaces need clear front access. The system is suited to cabinets within the specified door height range of 19-11/16 inches to 27-9/16 inches, aligning well with smaller enclosures such as media niches or workspace organizers. Minimum cabinet depth of 16-9/16 inches creates a predictable requirement for cabinet boxes, which is especially useful in production shops that repeat the same carcass depth. Fittings that let the door retract further into the cabinet than the ALTST20-D10 series increase the clear front opening, which is valuable when clients want unobstructed access to electronics, tools, or shelves while the door is open. Two slides working with the synchronized board guide the door, so both sides travel together, supporting consistent action across repeated openings throughout the day.
Details That Improve Alignment And Repeatable Results
Door alignment adjustability in the overlay pocket door system allows the installer to fine-tune how the door sits relative to the cabinet face, which helps achieve even gaps and a professional front appearance without reworking the case. The overlay amount of up to 3/8 inch, or 10 mm, clearly defines the maximum overlay, helping drafters and builders coordinate face layout, reveal planning, and neighboring fronts across a run of cabinets. The overlay damper unit with an adjustment screw lets the user tailor the damping response, which helps control the closing or retracting behavior in busy environments where doors are moved frequently. Because the fittings retract the door further into the cabinet than the ALTST20-D10 series, the door sits deeper in the pocket when open, reducing the chance of contact with projecting hardware or handles in adjacent areas. The manufacturer part number ALT-ST15-D10S-16 and Sugatsune America branding provide a stable reference for specifying the same pocket door hardware on future projects, helping keep replacements and expansions consistent.
Common Questions About ALT-ST15-D10S-16 Use
What type of cabinet doors use this overlay pocket door system?
The overlay pocket door system is designed for overlay cabinet doors, so the door covers the cabinet front while still being able to retract into the cabinet for clear access.
What cabinet depth is required for this pocket door hardware?
The pocket door hardware requires a minimum cabinet depth of 16-9/16 inches, which sets the interior space needed for the door to fully retract without interfering with the cabinet back.
What door height range does the ALT-ST15-D10S-16 support?
The ALT-ST15-D10S-16 system supports door heights from 19-11/16 inches to 27-9/16 inches, guiding door fabrication so the hardware and door size work together correctly.
How does the door alignment adjustability help during installation?
Door alignment adjustability lets the installer fine-tune the door position relative to the cabinet face, helping achieve even reveals and a clean front line after mounting.
What is the practical effect of up to 3/8 inch overlay?
An overlay amount up to 3/8 inch defines how far the door can cover the cabinet front, helping coordinate overlays and spacing with neighboring doors or panels in the same run.
How does further door retraction benefit cabinet access?
Fittings that retract the door further into the cabinet than the ALTST20-D10 series provide a wider opening in front, helping keep the door clear of equipment or stored items.
Select This Overlay Pocket Door Kit For Targeted Jobs
The Sugatsune overlay pocket door kit with part number ALT-ST15-D10S-16 combines overlay-specific design, door alignment adjustability, and a defined door height range from 19-11/16 inches to 27-9/16 inches, which helps match the hardware to planned cabinet dimensions. Minimum cabinet depth of 16-9/16 inches and an overlay amount up to 3/8 inch provide clear layout parameters for case construction and door sizing. Fittings that retract the door further into the cabinet than the ALTST20-D10 series support projects where maximum front clearance is important. Use these defined values to align this pocket door hardware with multimedia, workspace, or organizational cabinets that benefit from doors that retract fully out of the way.