
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware solution designed as an overlay pocket door system with door alignment adjustability, so the door position can be fine-tuned after installation for a cleaner cabinet reveal. The kit is specified as an Overlay Pocket Door System with door alignment adjustability, which supports accurate positioning when fitting doors on built-ins or multimedia cabinets. The system uses 4-slides, so movement is controlled along multiple tracks, which supports smoother door travel across the full opening. The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which creates more clearance at the front of the cabinet when the door is open. The overlay amount is up to 3/8 inch (10 mm), giving a defined overlay range that guides door sizing on overlay applications. The product is classified as Pocket Door Hardware, tying it directly to cabinet door concealment projects.
The kit is specified for a minimum cabinet depth of 19-1/2 inches, so cabinet cases need at least this depth for the slides and retraction hardware to operate within the carcass. The compatible door height range is 47-1/4 inches to 63 inches, which defines the vertical size window where the system is designed to function. The overlay amount is up to 3/8 inch (10 mm), so door width and face reveal can be planned around that overlay dimension. The overlay damper unit with adjustment screw gives an adjustment point during installation, allowing fine control of the damped motion as the door transitions between open and closed positions inside the cabinet depth.
This pocket door hardware is categorized as an Overlay Pocket Door System, aligning it with cabinet projects where doors sit over the face of the cabinet instead of inset. The specified minimum cabinet depth of 19-1/2 inches means it fits cabinet structures that provide enough internal space to house the 4-slides and retraction motion inside the carcass. The door height range of 47-1/4 inches to 63 inches ties the hardware to medium-tall doors, such as those on multimedia cabinets or storage units, ensuring the slide system geometry matches the door size. Because fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, this system suits layouts where maximizing front opening clearance is important when the door is pocketed.
The door alignment adjustability built into this overlay pocket door system provides controlled adjustment points, so installers can fine-tune how the overlay door sits relative to adjacent faces, which helps create a uniform reveal across a run of cabinets. The overlay amount up to 3/8 inch (10 mm) sets a consistent design target that supports repeatable door sizing and overlay planning across multiple openings. The 4-slides configuration spreads the door movement across several sliding members, which promotes stable tracking as the door moves into and out of the cabinet cavity. The overlay damper unit with adjustment screw gives a dedicated adjustment location that allows the damping response to be tuned to the specific door within the 47-1/4 inch to 63 inch height range, supporting controlled motion and reducing abrupt stops as the door reaches its parked position.
The Sugatsune overlay pocket door kit is specified for a minimum cabinet depth of 19-1/2 inches, which means cabinet cases need at least that depth for proper slide and retraction function.
The overlay pocket door system is specified for doors from 47-1/4 inches to 63 inches high, aligning the 4-slides geometry with medium-tall cabinet doors.
The pocket door hardware supports an overlay amount up to 3/8 inch, or 10 mm, which provides a defined overlay dimension for planning door and face frame relationships.
The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases front opening clearance when the door is stored.
The overlay damper unit has an adjustment screw, giving an accessible point to adjust damping action so door movement can match the installed door size and weight.
The kit is classified as Pocket Door Hardware and identified by manufacturer part number ALT-ST15-D10LL-19, which ties it to the specified overlay and retraction features.
The overlay pocket door system with door alignment adjustability, 4-slides, and fittings that allow further door retraction into the cabinet than the ALTST20-D10 series provides a defined solution when planning overlay pocket doors. The minimum cabinet depth of 19-1/2 inches and door height range from 47-1/4 inches to 63 inches clearly mark the cabinet and door sizes where this pocket door hardware is designed to operate. The overlay amount up to 3/8 inch (10 mm) offers a straightforward dimension for designing overlay door faces around this Sugatsune America system on cabinetry projects.