Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 24-1/2", Door Height 47-1/4" - 63", 4-Slides, Further Door Retraction, - ALT-ST15-D10LL-24
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a complete pocket door hardware setup designed for overlay cabinet doors using the ALT-ST15-D10LL-24 configuration. The overlay pocket door system provides door alignment adjustability, which allows fine tuning of the door position so the face lines up cleanly with surrounding cabinet fronts. The overlay amount is up to 3/8 inch (10 mm), giving flexibility to match common overlay layouts in cabinetry runs. This pocket door hardware is specified for a minimum cabinet depth of 24-1/2 inches, so deeper cabinets can house the retracted door without interference. The kit is designed for door heights from 47-1/4 inches to 63 inches, covering a typical range for tall cabinet or multimedia doors. The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which clears the opening more fully when the door is parked inside.
Overlay Pocket Door System Features For Workflow
- The overlay pocket door system provides door alignment adjustability, which supports clean reveals and helps the front of the door sit flush with adjacent surfaces after installation.
- The overlay amount is up to 3/8 inch (10 mm), allowing the installer to match standard overlay layouts on face cabinetry when planning door and face frame relationships.
- Fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, creating more access across the opening once the door is stowed.
- Four slides in the kit distribute movement across multiple tracks, supporting smoother travel of the door into and out of the cabinet structure.
- An overlay damper unit with adjustment screw manages the closing motion, and the adjustment screw allows tuning of the damping effect to better match door size and feel.
- A synchronized board coordinates slide motion, which helps the pocket door move evenly and track straight as it travels.
Installation And Fit Details For Cabinet Use
This pocket door slides kit is specified for a minimum cabinet depth of 24-1/2 inches, so cabinet construction can be planned around that dimension when building or modifying a case. The supported door height range of 47-1/4 inches to 63 inches defines where this system fits best in tall cabinet or multimedia applications, helping size the door panel appropriately. The overlay amount of up to 3/8 inch (10 mm) impacts how the door covers the cabinet opening, so layout of side reveals and face frame intersections can be based on that overlay. The overlay damper unit with adjustment screw adds a controllable resistance to door movement, which can be set during installation to achieve the desired closing behavior.
Using This Pocket Door Hardware In Projects
Where This Pocket Door Kit Works Best
This pocket door hardware is categorized as pocket door slides within pocket door hardware, aligning it with cabinet, multimedia, and workspace components where a door needs to retract fully. The minimum cabinet depth of 24-1/2 inches positions it for deeper cabinets that can accommodate a door stored inside the carcase. The door height range of 47-1/4 inches to 63 inches suits mid-height to tall doors, such as for multimedia cabinets, closets, or workspace enclosures within those dimensions. The overlay amount up to 3/8 inch (10 mm) supports overlay door configurations instead of inset, so it fits projects that use overlay styling across the run. Fittings that allow farther retraction than the ALTST20-D10 series help applications requiring maximum clear opening, such as access to equipment or storage inside the cabinet.
Details That Support Smooth, Repeatable Motion
The pocket door slides kit uses four slides, which spreads movement across multiple tracks and supports consistent travel of the door as it moves in and out of the cabinet. The synchronized board coordinates slide motion, helping keep the door running straight and reducing binding during repeated use. Door alignment adjustability gives the installer a way to refine the door position after mounting, improving the final reveal without rebuilding the cabinet. The overlay damper unit with adjustment screw manages the motion of the overlay door, and the adjustability lets the user tailor the damping response to the specific door weight within the stated height range. Fittings that pull the door farther into the cabinet than the ALTST20-D10 series keep the stored door deeper inside the cabinet plane, which can benefit layouts where interior clearance in front of shelves or equipment is important.
Key Questions About ALT-ST15-D10LL-24 Use
What cabinet depth does this pocket door kit require?
The Sugatsune overlay pocket door kit is specified for a minimum cabinet depth of 24-1/2 inches, so cabinets within this depth can house the retracted door properly.
What door height range does this overlay pocket door system support?
The overlay pocket door system supports door heights from 47-1/4 inches to 63 inches, covering many tall cabinet and multimedia door applications within that range.
How much overlay does the Sugatsune pocket door kit allow?
The Sugatsune overlay pocket door kit provides an overlay amount up to 3/8 inch (10 mm), which defines how far the door covers the face of the cabinet opening.
How does the damper adjustment help cabinet door operation?
The overlay damper unit with adjustment screw lets the installer tune the damping effect on the door movement, influencing how the door feels as it closes.
What is the role of the synchronized board in this kit?
The synchronized board coordinates motion across the slides, helping the pocket door travel evenly and improving tracking as it moves in and out of the cabinet.
How does this kit compare to the ALTST20-D10 series for retraction?
This pocket door slides kit uses fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series, increasing free access at the opening.
Select This Overlay Pocket Door Kit For Fit
The Sugatsune America ALT-ST15-D10LL-24 pocket door hardware is tailored to cabinets with a minimum 24-1/2 inch depth and doors between 47-1/4 inches and 63 inches high, fitting many multimedia and storage layouts. Its overlay pocket door system supports up to 3/8 inch (10 mm) overlay and door alignment adjustability, helping match overlay fronts while refining reveals. Fittings that retract the door farther than the ALTST20-D10 series improve clearance across the opening. When planning an overlay pocket door cabinet within these dimensions, this pocket door slides kit offers a coordinated solution built around those parameters.