Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door system designed for cabinets where the door overlays the face frame or case. The kit is identified as manufacturer part ALT-ST15-D10M-19, so installers can match it accurately on drawings and reorders. The system is classified as pocket door hardware with 2-slides, creating a guided track that lets the door move out and back smoothly during operation. The minimum cabinet depth of 19-1/2 inches defines the carcass dimension this system is built around, which helps during layout when planning case depth and internal clearances. A door height range of 27-9/16 inches to 35-7/16 inches sets the working envelope for the door panel, which supports predictable door sizing within that band. The product sits in the pocket door slides category, aligning it with multimedia and workspace cabinet applications where retracting doors keep fronts clear while equipment is in use.
The minimum cabinet depth of 19-1/2 inches defines the case dimension needed for this pocket door kit, so cabinet sides and interior components can be sized around a known requirement. The door height range from 27-9/16 inches to 35-7/16 inches frames the workable panel size, which streamlines cutting lists and door ordering within that span. The 2-slides structure organizes the load path and travel, giving a predictable motion path during installation checks and adjustments. Door alignment adjustability built into the overlay pocket door system helps during final fit, because small shifts can be dialed in at the hardware rather than remaking the door. The overlay damper unit with its adjustment screw becomes part of the final tuning step, allowing the installer to adjust the damping response to match the weight of the door and user preference.
The Sugatsune America ALT-ST15-D10M-19 overlay pocket door kit is categorized as pocket door hardware for multimedia and workspace components, placing it in cabinets that need retracting doors in front of equipment or work areas. The specified minimum cabinet depth of 19-1/2 inches aligns with deeper casework often used for electronics, printers, or workspace tools, so the hardware geometry matches those cabinet proportions. With a door height range of 27-9/16 inches to 35-7/16 inches, the system suits medium-height doors, which are common on upper cabinet sections, equipment garages, or work centers. The overlay pocket door system layout supports overlay fronts, aligning with cabinets that use overlay design across the run, so the doors maintain a consistent visual line when closed. Fittings that retract the door further into the cabinet than the ALTST20-D10 series create more open access at the front, which can be useful where cords, controls, or work surfaces need a clear opening.
Door alignment adjustability built into this overlay pocket door system provides a controlled way to correct small racking or reveal issues, so multiple doors across a bank can present the same gap and alignment without custom shimming. The overlay amount up to 3/8 inch, or 10 mm, sets a clear design rule for overlay depth, which reduces layout guesswork when coordinating fronts, fillers, and neighboring hardware. The overlay damper unit with its adjustment screw gives installers a direct control point for damping performance, so motion can be tuned rather than left to fixed factory behavior. The 2-slides arrangement gives the door a defined travel path, which helps keep motion consistent from cabinet to cabinet when the same ALT-ST15-D10M-19 kit is used throughout a project. Fittings that allow further door retraction into the cabinet than the ALTST20-D10 series alter the final open position, which helps standardize clearances where multiple pockets line up along a wall of multimedia or workspace casework.
The Sugatsune overlay pocket door kit is specified for a minimum cabinet depth of 19-1/2 inches, which sets the case dimension needed when designing or building the cabinet.
The overlay pocket door system is designed for doors between 27-9/16 inches and 35-7/16 inches tall, guiding door sizing within that window for proper function.
The overlay pocket door hardware supports an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door can overlay the cabinet face when closed.
The door alignment adjustability on this kit provides fine control over the overlayed door position, helping align reveals and margins without altering the cabinet or door.
Fittings that retract the door further into the cabinet than the ALTST20-D10 series create a deeper parked position, which helps keep openings clearer in multimedia and workspace cabinets.
The overlay damper unit with an adjustment screw manages the damping behavior of the door motion, allowing the installer to tune movement feel to the cabinet application.
The Sugatsune America ALT-ST15-D10M-19 overlay pocket door kit combines a minimum 19-1/2 inch cabinet depth specification, a 27-9/16 inch to 35-7/16 inch door height range, and an overlay amount up to 3/8 inch, or 10 mm, so cabinet dimensions and door sizing can be planned around defined limits. Door alignment adjustability and the overlay damper unit with its adjustment screw give control points for final fit and motion, helping bring multiple overlay doors into a consistent line. Fittings that retract the door further into the cabinet than the ALTST20-D10 series support deeper pocket positions, which can be useful in multimedia and workspace cabinet runs. Select this overlay pocket door hardware when a defined envelope and on-hardware adjustment help streamline layout, installation, and final tuning.
