Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit is a pocket door hardware solution designed for overlay cabinet applications where the door needs to retract inside the case. The system belongs to the pocket door hardware class, so it is built around a slide-driven mechanism that moves the door from a closed overlay position into a pocketed position. The kit is configured for a minimum cabinet depth of 22-1/2 inches, which sets the carcass depth needed for the slides and retracted door to clear. It supports door heights from 27-9/16 inches to 35-7/16 inches, covering a common range for multimedia, workspace, and storage cabinet doors so one model can service several cabinet sizes on a project. A pair of slides drives the motion, giving the door guided travel in and out of the cabinet opening along a consistent path.
This overlay pocket door kit is configured for a minimum cabinet depth of 22-1/2 inches, so the case must be built or specified with that depth to accommodate full door retraction on the slides. The supported door height range of 27-9/16 inches to 35-7/16 inches defines where this system fits within a run, allowing planning of door sizes that remain inside the specified range. Door alignment adjustability built into the system gives the installer the ability to shift and fine-tune the mounted door relative to the cabinet, which helps bring doors flush with adjacent fronts and straighten reveals after mounting. An overlay damper unit with an adjustment screw is part of the system, so the closing action can be tuned at the damper to balance motion and final seating of the door in the overlay position.
This Sugatsune America pocket door hardware sits in the shelf, closet and garage organization category, as well as multimedia and workspace components, so it is positioned for cabinets that need doors to clear out of the way while equipment or contents stay accessible. The kit uses 2 slides to move the door from the overlay position into the cabinet, so the door travels on a defined path and ends up parked inside the case during use. The fittings in this ALT-ST15-D10M-22 configuration allow the door to retract further into the cabinet than the ALTST20-D10 series, which means the parked door occupies less of the opening and leaves more usable access area in front. With a minimum cabinet depth of 22-1/2 inches, this system suits deeper cases common in multimedia, workspace, and storage applications where equipment or contents extend back into the cabinet.
The overlay pocket door system provides door alignment adjustability, so after the slides, hinges, and hinge mounting plates are fixed to the cabinet and door, the installer can adjust the door position without altering the main case. This capability helps fine-tune vertical and horizontal reveals, which is important when aligning with nearby doors or panels across a run. The overlay amount of up to 3/8 inch, or 10 mm, defines how far the door can cover the cabinet front in the closed position, giving a clear target when laying out front spacing. The overlay damper unit with its adjustment screw lets the user alter the closing behavior at the damper, which helps coordinate the way the door settles against the front with the feel of the slides. Because the fittings pull the door further into the cabinet than the ALTST20-D10 series, the retracted door remains deeper inside the case, which reduces interference at the face of the cabinet when equipment, shelves, or work surfaces are used directly in front of the opening.
The Sugatsune overlay pocket door kit supports door heights from 27-9/16 inches to 35-7/16 inches, allowing it to cover a range of medium-height cabinet doors used in multimedia and workspace installations.
The pocket door system is specified for a minimum cabinet depth of 22-1/2 inches, so cabinets need that depth to allow the door and 2 slides to retract fully inside the case.
The door alignment adjustability lets the installer shift the mounted door relative to the cabinet opening, which helps straighten reveals and line up the pocket door with adjacent fronts.
An overlay amount up to 3/8 inch, or 10 mm, means the closed door can cover that distance over the cabinet front, helping coordinate door layout with surrounding overlay fronts.
The overlay damper unit with an adjustment screw lets you alter the closing behavior at the end of travel, which helps achieve a controlled, predictable final movement into the overlay position.
This ALT-ST15-D10M-22 configuration uses fittings that retract the door further into the cabinet than the ALTST20-D10 series, which leaves more of the front opening clear during use.
The Sugatsune overlay pocket door kit ALT-ST15-D10M-22 combines an overlay pocket door system, 2 slides, and door alignment adjustability to support clean overlay fronts that retract out of the way in use. The specified minimum cabinet depth of 22-1/2 inches and door height range from 27-9/16 inches to 35-7/16 inches give clear design windows for cabinet and door sizing, simplifying planning. An overlay amount up to 3/8 inch and the overlay damper unit with adjustment screw support precise front alignment and tuned closing behavior. The fittings that retract the door further into the cabinet than the ALTST20-D10 series open more of the front for access. For projects needing overlay pocket door hardware within these dimensions, this kit aligns the motion, alignment, and retraction details into one coordinated system.
