Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 28-9/16", Door Height 27-9/16" - 35-7/16", 2-Slides, Further Door Retraction, - ALT-ST15-D10M-28
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware system that lets a cabinet door slide back into the cabinet on slides instead of swinging out, which frees up front clearance in multimedia or workspace cabinets. The system is an overlay pocket door system, so the door overlays the cabinet face by a defined amount, which helps match overlay layouts with surrounding doors. The minimum cabinet depth of 28-9/16 inches sets the case depth needed for the slides and synchronized board to operate, which guides cabinet design and layout. A door height range of 27-9/16 inches to 35-7/16 inches defines the workable door size for this kit, which helps select doors that will track correctly on the slides. The kit uses 2 slides, so the door rides on a pair of slide members, which supports smoother movement along the opening and into the pocket.
Functional Details That Support Cabinet Projects
- The overlay pocket door system provides door alignment adjustability, which allows the installer to fine-tune the door position to the cabinet opening so reveals can be set cleanly along the face.
- An overlay amount up to 3/8 inch, or 10 mm, defines how far the door overlaps the cabinet front, which helps coordinate overlay dimensions with other overlay fronts in the same run.
- The kit uses an overlay damper unit with an adjustment screw, which lets the user adjust the damping action on the closing motion so movement can be tuned to the application.
- The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases how deep the door can sit in the pocket and helps clear the front opening more completely.
- The system is classified as pocket door hardware, which means it is intended for cabinet pocket door applications where a door is stored inside the cabinet instead of opening into the room.
Overlay Pocket Door Mounting And Adjustment Use
This overlay pocket door system provides door alignment adjustability at the hardware level, which gives the installer control over final door position after the cabinet is built. The overlay amount up to 3/8 inch, or 10 mm, establishes how the hinges and plates set the door over the cabinet front, which simplifies lining up overlay across multiple fronts. The overlay damper unit with an adjustment screw sits in the motion path, which means the closing action can be adjusted on site to better match door weight and user preference. With a minimum cabinet depth of 28-9/16 inches and a door height range of 27-9/16 inches to 35-7/16 inches, the mounting geometry is defined, which helps align case construction, door sizing, and slide positioning into one coordinated layout.
Where This Overlay Pocket Door System Fits
Overlay Pocket Door System In Cabinet Layouts
This overlay pocket door system from Sugatsune America is designed as pocket door hardware for cabinet applications where a door needs to slide back into the case rather than swing into the workspace. The minimum cabinet depth of 28-9/16 inches defines the carcass depth required behind the face, which aligns well with deeper multimedia and workspace components that need room for equipment. A door height range between 27-9/16 inches and 35-7/16 inches sets the vertical size window for doors, which supports consistent proportion when multiple doors share the same cabinet line. The fittings allow the door to retract further into the cabinet than the ALTST20-D10 series, which improves front access to the cabinet interior and helps keep the door out of the equipment zone when fully stored.
Details That Help Alignment And Motion Results
The overlay pocket door system provides door alignment adjustability, which directly supports fine-tuning reveals and edge gaps after the door is hung, reducing rework in the shop. An overlay amount up to 3/8 inch, or 10 mm, offers a defined overlay dimension, which simplifies matching this pocket door to adjacent overlay doors. The overlay damper unit with an adjustment screw gives control over the closing speed and cushioning, which helps achieve a more controlled motion for different door sizes within the 27-9/16 inch to 35-7/16 inch range. Using 2 slides in the kit provides paired slide support for the door, which promotes smoother retraction and extension as the door moves out of the opening and back into the cabinet pocket.
Common Questions About ALT-ST15-D10M-28 Use
What cabinet depth works with this Sugatsune overlay pocket door kit?
The Sugatsune overlay pocket door kit requires a minimum cabinet depth of 28-9/16 inches, which sets the carcass depth so the slides and synchronized board can move the door fully into the cabinet.
What door height range does this pocket door system support?
The overlay pocket door system supports doors from 27-9/16 inches to 35-7/16 inches in height, which defines the usable door sizes that will operate correctly on the provided slides and hinges.
How much overlay does the ALT-ST15-D10M-28 hardware provide?
The ALT-ST15-D10M-28 overlay pocket door hardware provides an overlay amount up to 3/8 inch, or 10 mm, which sets how far the door overlaps the cabinet face in an overlay layout.
How does the door alignment adjustability help during installation?
The door alignment adjustability lets the installer shift the door position within the opening, which helps tighten reveals and align this pocket door with adjacent cabinet fronts.
What is the role of the overlay damper unit in this system?
The overlay damper unit in this system provides controlled damping on the door movement, and its adjustment screw lets the closing action be tuned to the specific door and cabinet use.
How does this kit compare to the ALTST20-D10 series for retraction?
This pocket door kit uses fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases front opening clearance when the door is stored.
Select This Overlay Pocket Door Kit For Defined Fit
The Sugatsune America ALT-ST15-D10M-28 overlay pocket door kit combines an overlay pocket door system, 2 slides, and door alignment adjustability to serve cabinet projects that need doors to store inside the case. The minimum cabinet depth of 28-9/16 inches and door height range of 27-9/16 inches to 35-7/16 inches define the working geometry, which simplifies matching the hardware to case dimensions and door sizes. The overlay amount up to 3/8 inch, 10 mm, and the overlay damper unit with an adjustment screw give control over the final overlay look and motion, which supports consistent results across multimedia and workspace components.