Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 24-1/2", Door Height 19-11/16" - 27-9/16", 2-Slides, Further Door Retraction, - ALT-ST15-D10S-24
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware system designed for cabinet applications where the door overlays the cabinet opening and then retracts inside. The kit is classified as pocket door hardware and sits in the pocket door slides category, so it is built around slide-based movement rather than hinges alone. It is specified for a minimum cabinet depth of 24-1/2 inches, which sets the required case depth so the slides and retraction path operate without interference. The door height range of 19-11/16 inches to 27-9/16 inches defines the vertical opening this system is intended to handle, guiding cabinet and door sizing. The product uses 2 slides in the system, establishing a guided motion path that supports smoother door travel and better door control in use. The system is identified by manufacturer part ALT-ST15-D10S-24, which ties directly to Sugatsune documentation and future ordering consistency.
Key Overlay Pocket Door Details For Projects
- The overlay pocket door system provides door alignment adjustability, which allows fine-tuning of the door position so the overlay lines up cleanly with the cabinet face.
- An overlay amount of up to 3/8 inch (10 mm) defines how far the door can overlap the cabinet opening, helping match the system to surrounding face-frame or frameless layouts.
- The overlay damper unit has an adjustment screw, giving a way to adjust the damping action so door movement can be controlled for smoother closing behavior.
- Fittings in this system allow the door to retract further into the cabinet than the ALTST20-D10 series, which increases internal clearance around the opening when the door is stored.
- The use of pocket door slides in a kit format groups the moving components into a coordinated system, supporting consistent motion characteristics across installations.
Overlay Pocket Door System Fit And Setup
This overlay pocket door system is specified as an ST15 S-Type, which identifies the configuration within Sugatsune pocket door hardware offerings and supports repeatable layout from job to job. The minimum cabinet depth of 24-1/2 inches provides a clear dimension to design around so the slides and retracted door fit fully within the case. The stated door height range from 19-11/16 inches to 27-9/16 inches defines where the system is intended to perform, so door panels within this range can be planned with predictable movement. With 2 slides as part of the motion path, the door is guided at multiple points, which supports smoother tracking when opening and retracting. The overlay amount up to 3/8 inch (10 mm) gives a defined offset target, which helps align the door face with adjacent fronts in cabinet runs.
Using This Pocket Door Hardware In Cabinets
Where This Overlay Pocket Door Kit Performs Best
This pocket door kit is positioned in the shelf, closet and garage organization, multimedia and workspace components, and pocket door slides categories, so it is aimed at cabinet-style enclosures in those environments. The minimum cabinet depth of 24-1/2 inches suits cases built deep enough to house both the slide hardware and a retracted door without projecting into the room, which is typical for multimedia cabinets or workspace storage. The door height range of 19-11/16 inches to 27-9/16 inches fits mid-height cabinet doors commonly used above work surfaces or in wall cabinets, aligning the hardware to those openings. Fittings that allow the door to retract further into the cabinet than the ALTST20-D10 series increase usable front access when the door is open, which is useful in multimedia or workspace applications where full access to equipment or storage is needed.
Details That Support Alignment And Repeatable Results
The overlay pocket door system provides door alignment adjustability, giving a way to shift the door position relative to the opening so reveals and overlays can be dialed in consistently across multiple cabinets. An overlay amount up to 3/8 inch (10 mm) sets a clear design envelope, letting door sizing and face relationships be calculated rather than guessed. The overlay damper unit with an adjustment screw means damping performance is not fixed, so the motion can be tuned by turning the screw to better match door weight and project expectations. Two slides in the system establish a stable guided path, which supports more predictable door travel when retracting and extending. Fittings that allow further door retraction than the ALTST20-D10 series shift the stored door deeper into the cabinet, which can reduce interference with interior components or working space at the front of the cabinet.
Common Questions About This Pocket Door System
What cabinet depth does the ALT-ST15-D10S-24 pocket door need?
The Sugatsune overlay pocket door kit specifies a minimum cabinet depth of 24-1/2 inches, which sets the case depth needed so the slides and retracted door operate within the cabinet.
What door height range works with this overlay pocket system?
The overlay pocket door system is specified for door heights from 19-11/16 inches to 27-9/16 inches, so doors sized in this range align with the hardware geometry.
How far can the door overlay the cabinet opening?
The Sugatsune overlay pocket door kit supports an overlay amount up to 3/8 inch (10 mm), providing a defined overlap for planning face relationships on the cabinet front.
What does door alignment adjustability provide on this kit?
The overlay pocket door system with door alignment adjustability allows the door position to be fine-tuned, helping achieve straight reveals and consistent overlay across doors.
How does the further door retraction affect cabinet use?
Fittings that retract the door further into the cabinet than the ALTST20-D10 series increase front opening clearance, which can ease access to interior equipment or storage.
What is the role of the overlay damper unit adjustment screw?
The overlay damper unit with an adjustment screw allows the damping response to be adjusted, so door motion can be tuned for smoother operation in service.
Select This Pocket Door Kit For Overlay Cabinets
The Sugatsune overlay pocket door kit ALT-ST15-D10S-24 provides a coordinated pocket door hardware solution for overlay cabinet doors within the stated height range and a minimum cabinet depth of 24-1/2 inches. The system combines 2 slides, an overlay damper unit with adjustment screw, and door alignment adjustability to support controlled motion and clean overlay relationships. Fittings that retract the door further into the cabinet than the ALTST20-D10 series improve access at the front opening. For projects built around pocket door slides in multimedia, workspace, or storage cabinets, this ST15 S-Type system offers a defined overlay amount and clear dimensional parameters for repeatable layouts.