Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pocket door kit is a pocket door system designed for cabinet doors that need to slide back out of the way instead of swinging into the workspace. The kit is specified as an inset pocket door system, so the door sits flush within the cabinet opening for a cleaner front. The minimum cabinet depth rating of 19-1/2 inches defines the case size this system is designed to fit, which helps align cabinet layout with the hardware. A stated door height range of 47-1/4 inches to 63 inches sets the working envelope and helps determine which projects it suits, from medium-height cabinets to taller multimedia or workspace enclosures. Four slides are specified, so the door movement is guided on multiple tracks, supporting smooth travel in and out of the cabinet. The product is classified as pocket door hardware, positioning it for projects where concealment and clear access are both required.
This inset pocket door system is specified for cabinet installations where the door needs to slide back into the case instead of staying in front. The minimum cabinet depth of 19-1/2 inches defines how deep the case must be, which guides casework design before hardware layout. The stated door height range of 47-1/4 inches to 63 inches shapes where this kit is used, aligning it with medium to tall doors that need to disappear into the cabinet. Four slides are specified, so the setup anticipates slide locations that share the door load and keep motion aligned. The 5-speed adjustable soft-closing dampers give an adjustment point during setup, allowing the closing speed to be matched to the size and weight of the specific door.
This inset pocket door system is categorized under shelf, closet and garage organization as well as multimedia and workspace components, so it is geared toward cabinets that need both clean fronts and open access during use. The pocket door hardware classification explains its role in these projects: the door slides back into the cabinet instead of swinging, which is useful where swing clearance would interfere with equipment, tools, or work surfaces. The specified door height range of 47-1/4 inches to 63 inches places it in applications such as tall media cabinets or workspace storage where mid-height to tall doors are common. The minimum 19-1/2 inch cabinet depth rating points to deeper cabinets, which often house electronics, supplies, or tools that benefit from a door that fully clears the opening when retracted. Fittings that let the door retract further into the cabinet than the ALTST20-D360 series support layouts where extra front clearance in the open position is valuable, such as in tight aisles or against adjacent fittings.
The pocket door kit is identified with manufacturer part number ALT-ST15-D360LL-19, tying all the specified components and performance into a single system for consistent results across multiple cabinets. Four slides are specified, which distributes travel guidance over more hardware points and supports smoother, more stable motion as the door moves in and out of the cabinet. The 5-speed adjustable soft-closing dampers provide tuning of the closing profile, letting the door slow progressively at the end of travel and reducing impact forces at the cabinet face. This controlled soft-close behavior supports repeatable, predictable operation over time, especially on taller doors within the 47-1/4 inch to 63 inch range. Fittings that enable further door retraction inside the cabinet than the ALTST20-D360 series help keep the door clear of the front opening during use, which supports unobstructed access to shelves, equipment, or workspace components housed inside the cabinet.
This product is described as an inset pocket door system, so it is designed for doors that sit flush within the cabinet opening and then slide back into the cabinet for access.
The inset pocket door kit specifies a minimum cabinet depth of 19-1/2 inches, so cabinet cases are sized around that depth to match the hardware requirements.
The Sugatsune inset pocket door kit is specified for door heights from 47-1/4 inches to 63 inches, aligning it with medium-height to tall cabinet doors in that range.
The 5-speed adjustable soft-closing dampers let the soft-close action be tuned, so the door slows in a controlled way at the end of travel for quieter, more controlled closing.
Fittings in this system are described as allowing the door to retract further into the cabinet than the ALTST20-D360 series, providing more front opening clearance when the door is stored.
The product specifies 4 slides, so door movement is guided by multiple slide members, supporting smooth, stable travel in and out of the cabinet opening.
This Sugatsune inset pocket door kit ties cabinet depth, door height, slide count, and soft-closing control into a defined pocket door system. The minimum 19-1/2 inch cabinet depth and 47-1/4 inch to 63 inch door height range frame where it fits best, while four slides and 5-speed adjustable soft-closing dampers support controlled movement. For cabinet work that benefits from doors retracting further into the case to open up the front, this pocket door hardware offers a clearly specified option.
