Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pocket door kit uses an inset pocket door system to let a cabinet door slide back into the cabinet, which frees access to multimedia or workspace areas while keeping the door aligned with the cabinet face when closed. This pocket door hardware is supplied as a kit with 2-slides so the door movement stays guided along both sides, helping keep the door tracking straight during repeated use. The system uses 5-speed adjustable soft-closing dampers that control the closing motion, so the door slows as it reaches the front of the cabinet and settles more gently against the frame. Fittings allow the door to retract further into the cabinet than ALTST20-D360 series, which opens up more clear access in front of the cabinet interior. The door height range of 27-9/16 inches to 35-7/16 inches defines the size of cabinet doors this kit is intended to handle on a job.
This pocket door hardware is specified with a minimum cabinet depth of 24-1/2 inches, which means the cabinet interior must extend at least that far to house the slides and the fully retracted door within the case. The stated door height range of 27-9/16 inches to 35-7/16 inches sets the vertical dimension window for the door panel, so cabinet and face-frame layouts can be sized to keep the door within those limits. The use of 2-slides in the kit implies a slide mounted on each side of the door, which guides installation planning around side clearance and mounting locations inside the cabinet. The 5-speed adjustable soft-closing dampers factor into installation because the damper needs to be positioned to interact correctly with the moving door for controlled closing.
This inset pocket door system is identified for pocket door slides in multimedia and workspace components, so it fits cabinet layouts where a door must open and then stow back inside the case while equipment or work surfaces remain accessible. Because the system is classified under pocket door hardware, it plays the role of moving and supporting the door as it transitions from closed at the cabinet front to retracted inside the cabinet interior. The minimum cabinet depth of 24-1/2 inches affects where this system can be used, directing it toward cabinets with enough depth to receive the retracted door and the slide mechanism. Within its door height range of 27-9/16 inches to 35-7/16 inches, the kit is suited to medium-height doors commonly found on upper or mid-level multimedia cabinetry. The configuration with 2-slides allows the door to travel along both sides, which helps keep the panel stable when it is moved repeatedly in active work areas. By retracting further into the cabinet than ALTST20-D360 series, the fittings help the door clear the cabinet opening more completely, which matters when users need full-width access without the door projecting into the working space in front of the cabinet. This deeper retraction also benefits layouts where equipment doors, drawers, or pull-out shelves operate behind the pocket door opening.
The 5-speed adjustable soft-closing dampers in this inset pocket door kit provide controlled deceleration near the end of the closing stroke, which helps prevent the door from slamming against the cabinet front and supports a more controlled feel during operation. Because the soft-closing dampers are described as 5-speed adjustable, installers can use the available settings to match the closing behavior to the installed door size within the specified height range of 27-9/16 inches to 35-7/16 inches. The further door retraction feature relative to the ALTST20-D360 series means that when the door is fully open, it sits deeper inside the cabinet, which reduces obstruction in front of the cabinet interior and helps maintain clearance in multimedia and workspace environments. The requirement for a minimum cabinet depth of 24-1/2 inches ties directly to how far the door and slides can travel, so cabinets built to that depth provide the space this system needs to move from the front to the fully retracted position. As pocket door hardware within the shelf, closet and garage organization category, this assembly is suited to projects where managing door swing clearance is important, because the door slides back rather than swinging out into the room.
This inset pocket door system specifies a minimum cabinet depth of 24-1/2 inches, which provides the space needed for the slides and the door to retract fully inside the cabinet.
The Sugatsune inset pocket door kit is specified for door heights from 27-9/16 inches to 35-7/16 inches, aligning the hardware with medium-height cabinet doors in that range.
The 5-speed adjustable soft-closing dampers manage the door closing motion, slowing the door as it reaches the cabinet front so the panel settles more gently against the cabinet.
The fittings allow the door to retract further into the cabinet than ALTST20-D360 series, increasing clear access in front of the cabinet interior during use.
This pocket door hardware kit uses 2-slides, providing slide guidance on both sides of the door so the panel tracks along a controlled path when opening and closing.
The manufacturer part number for this inset pocket door system is ALT-ST15-D360M-24, which identifies this specific configuration in the ST15 M-type series.
The Sugatsune inset pocket door kit ALT-ST15-D360M-24 combines 2-slides, an inset pocket door system, and 5-speed adjustable soft-closing dampers to manage door movement in cabinets built to a 24-1/2 inch minimum depth. With a door height range from 27-9/16 inches to 35-7/16 inches and fittings that allow the door to retract further into the cabinet than ALTST20-D360 series, this pocket door hardware targets multimedia and workspace cabinets where clearing the opening and controlling the closing motion support everyday access. For projects matching these dimensions and use conditions, this inset cabinet pocket doors solution aligns the hardware choice with the required door travel and cabinet layout.
