Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 19-11/16" - 27-9/16", 2-Slides, Further Door Retraction, - ALT-ST15-D360S-19
Description
Sugatsune Inset Pocket Door Kit For Cabinets
Sugatsune inset pocket door kit is a pocket door hardware solution designed for inset cabinet doors, so the door sits flush when closed and then slides back into the cabinet when opened. The kit is categorized as pocket door slides and pocket door hardware, which means it handles both the sliding function and the support for the door. A minimum cabinet depth of 19-1/2 inches is specified, so the cabinet case can fully house the pocketed door without binding. The stated door height range of 19-11/16 inches to 27-9/16 inches defines where this hardware operates reliably, so doors in that band can travel smoothly without overloading the system. The manufacturer part number ALT-ST15-D360S-19 identifies this specific configuration within Sugatsune America offerings, helping match it to drawings or repeat orders on multi-unit projects.
Key Pocket Door Details That Support Smooth Use
- The inset pocket door system uses two slides, so the door is guided on a dedicated slide set, providing stable motion that helps keep the door plumb through its travel.
- Fittings allow the door to retract further into the cabinet than the ALTST20-D360 series, so the open door sits deeper inside the case, freeing more front access to shelves or equipment.
- The system is described as an inset pocket door system, so it is tailored for installations where the door front aligns with the cabinet face, supporting clean, flush cabinetry layouts.
- The product is classified as pocket door hardware and pocket door slides, so it is intended as the primary mechanical solution for sliding and storing a cabinet door inside the cabinet body.
Inset Pocket Door Installation And Fit Parameters
The minimum cabinet depth of 19-1/2 inches sets the base installation requirement, so cabinet carcasses need that depth to allow the door to slide completely into the pocket. The door height range of 19-11/16 inches to 27-9/16 inches defines the workable vertical span, so fabricators can size doors within those limits and keep the hardware operating in its designed envelope. The presence of two slides means installers mount a coordinated pair, so the door weight is supported on both sides of the travel path for consistent tracking. The productâs classification as pocket door slides within pocket door hardware clarifies its role in the assembly, so it is used as the running gear for the retracting door section in multimedia, closet, or workspace cabinetry.
How This Pocket Door Hardware Performs In Use
Where This Sugatsune Inset Pocket Door Kit Fits Best
The Sugatsune inset pocket door kit operates as an inset pocket door system, so it suits cabinet layouts where closed doors align flush with surrounding panels and then retract into the case during use. The specified door height band of 19-11/16 inches to 27-9/16 inches points to mid-size cabinet doors, so the kit is a match for many multimedia and workspace components that fall in that range. With a minimum cabinet depth requirement of 19-1/2 inches, this hardware is suited to cases with enough interior depth to store the door without projecting past the back. Its classification under shelf, closet, and garage organization and multimedia and workspace components indicates a role in storage and equipment cabinets, so it supports applications where cleared access to the interior during operation is important.
Details That Support Soft Closing And Deeper Retraction
The inset pocket door system incorporates 5-speed adjustable soft-closing dampers, so the closing action can be tuned through five soft-close settings to better match door size and user preference, helping reduce slamming forces on the cabinet. This adjustability allows fine control over the last portion of travel, which supports smoother operation when doors are within the stated height range. The fittings are described as allowing the door to retract further into the cabinet than the ALTST20-D360 series, so the open door can sit deeper inside the pocket, leaving more of the cabinet front unobstructed during access. Two slides are specified, so the door rides on a pair of coordinated runners, which helps maintain alignment as the door moves between closed, soft-closing, and fully retracted positions.
Common Questions About This Pocket Door System
What door sizes work with this Sugatsune inset pocket door kit?
The Sugatsune inset pocket door kit supports door heights from 19-11/16 inches to 27-9/16 inches, so doors within that range can travel and retract as designed without overextending the system.
What cabinet depth is required for proper pocket door retraction?
The inset pocket door system specifies a minimum cabinet depth of 19-1/2 inches, so the cabinet interior can fully store the retracted door while keeping the slide mechanism within its intended travel.
How do the 5-speed adjustable soft-closing dampers help in use?
The 5-speed adjustable soft-closing dampers on this inset pocket door system allow tuning of the closing speed, helping manage impact on the cabinet and creating a more controlled final closing motion.
What is the benefit of further door retraction into the cabinet?
The fittings on this pocket door hardware retract the door further than the ALTST20-D360 series, so the open door sits deeper inside the cabinet, improving front access to stored items or equipment.
What does using two slides on this pocket door kit achieve?
The pocket door slides are specified as two slides, so the door is supported on a paired track system, promoting smoother motion and better alignment throughout opening, closing, and retraction.
How does the ALT-ST15-D360S-19 part number help on projects?
The manufacturer part number ALT-ST15-D360S-19 uniquely identifies this Sugatsune inset pocket door kit, simplifying repeat ordering and matching hardware to drawings or schedules on multi-unit jobs.
Select This Kit For Inset, Retracting Cabinet Doors
This Sugatsune inset pocket door kit from Wurth Baer Supply combines an inset pocket door system with two slides, a door height range of 19-11/16 inches to 27-9/16 inches, and a minimum cabinet depth of 19-1/2 inches, so it targets a clearly defined cabinet size class. The 5-speed adjustable soft-closing dampers and fittings that retract the door further into the cabinet than the ALTST20-D360 series work together to support controlled closing and deeper pocket storage. For projects using Sugatsune pocket door hardware in this size range, specifying ALT-ST15-D360S-19 aligns the cabinet casework, door panel sizes, and slide performance into one coordinated solution.