Nexis Cam Adjustable Wing Plate, 2-Point Fixing, Nickel-Plated, Screw-On, 2mm

Nexis Cam Adjustable Wing Plate For Hinges

Nexis cam adjustable wing plate gives you a stamped steel hinge mounting plate that works with the Grass Nexis clip-on hinge connection, so you get a solid cabinet-side base that mates cleanly with the hinge for straightforward mounting. This Nexis cam adjustable wing plate is described as a Grass Nexis base plate constructed of economy stamped steel, which provides a rigid platform that resists deformation in normal cabinet use. The base plate is nickel-plated, so the surface resists corrosion in typical indoor woodworking environments while presenting a clean, uniform appearance inside the cabinet. The part is identified as a Nexis cam adjustable wing plate with a 2 mm height specification, so it matches applications designed around that plate height for consistent door reveal when paired with the correct hinge. As a hinge mounting plate in the Grass America Nexis family, it fits into workflows already built around Grass hinges and mounting layouts.

Key Nexis Base Plate Details For Projects

• The web description states that Grass Nexis base plates are constructed of economy stamped steel, which gives you a dependable steel mounting surface that holds hinge forces in regular cabinet door cycling.
• The same description notes a nickel-plated finish, which adds a protective layer over the steel so the plate resists rust in standard interior use and maintains a neat look around the hinge arm.
• The product is identified as a Nexis cam adjustable wing plate with a 2 mm plate height, which ties into hinge and drilling setups designed for that height so door gaps stay predictable across a run.
• Cabinet side fixing style is two point, meaning the plate fastens to the cabinet at two locations so you can position the plate accurately along your system line while keeping drilling patterns simple.
• All base plates have plus or minus 2 mm of height adjustment, giving you a small cam-driven vertical range so you can fine-tune door alignment after hanging without redrilling cabinet or door.

Installation And Screw-On Mounting Details

The web description specifies a cabinet side fixing style of two point, which sets you up for a straightforward screw pattern on the cabinet side using two mounting locations to secure the plate. These Grass Nexis base plates are described as available in open hole to accommodate wood screws, so the mounting holes accept wood screws directly when you are fastening into cabinet material. The description states that the plate attaches with #6 x 5/8 inch flat head screws, which gives you a specific screw size and length that seats flush in the countersunk holes to keep the hinge arm sitting properly on the plate. The hinge connection is described as a clip-on design, so once the plate is secured on the cabinet, the Nexis hinge arm clips to the plate in one motion during door hanging or removal.

Using This Hinge Mounting Plate In Work

Where This Nexis Cam Adjustable Wing Plate Fits

The SAP description calls this part NEXIS 2MM CAM WING PLT WOOD SCREW STL, identifying it as a steel wing-style plate designed for wood screw fixing on the cabinet side, which suits standard frameless cabinet constructions. As a hinge mounting plate in the hinges and hinge base plates category, it works as the cabinet-side partner for Nexis clip-on hinges, so the hinge arm engages this plate to carry the door. The open hole design for wood screws means the plate is intended for direct screw mounting into cabinet panels, which aligns with common shop practices for installing concealed hinges in case sides. The specified 2 mm plate height ties into drilling patterns that assume that offset, so carcass and door drilling can follow established Nexis system dimensions for repeatable results on multiple cabinets.

Why Nexis Height Adjustment Supports Clean Results

The web description notes that all base plates have plus or minus 2 mm of height adjustment, so the cam mechanism in this Nexis cam adjustable wing plate allows you to raise or lower the hinge position slightly after the door is on. That small adjustment range lets you correct minor drilling or sag differences by turning the cam, which helps align door tops and bottoms across a cabinet bank without altering the casework. Because the plate attaches with #6 x 5/8 inch flat head screws into the cabinet side, the screws sit flush while the cam does the height change at the hinge interface, so the mounting remains tight while adjustments happen only where needed. The nickel-plated economy stamped steel construction keeps the adjustment area stable, so the plate continues to hold the hinge position in normal door use once the cam is set.

Common Questions About This Nexis Base Plate

Selecting This Nexis Plate For Hinge Runs

Nexis cam adjustable wing plate is identified as a Grass Nexis base plate with 2-point fixing, a 2 mm plate height, and plus or minus 2 mm of height adjustment, so it suits Nexis hinge projects needing cam-based vertical tuning at the cabinet side. The economy stamped steel, nickel-plated construction described in the product data delivers a steel mounting platform with a plated finish, which aligns with typical concealed hinge work in cabinets supplied by Wurth Baer Supply. When a hinge run calls for a Nexis clip-on interface with wood screw fixing, this hinge mounting plate matches that role so the door hinge, mounting plate, and cabinet side work together as a consistent system.