Nexis Cam Adjustable Wing Mounting Plate for Wood Screw, 3-Point Fixing, Screw-On, 0mm

Nexis Cam Adjustable Wing Mounting Plate Use

Nexis cam adjustable wing mounting plate is a hinge mounting plate from Grass America designed as a Nexis two cam adjustment base plate, so it provides built-in height and depth tuning between cabinet and door. The plate offers plus or minus 2 mm of cam height adjustment, giving you vertical play for aligning doors to neighboring fronts and cabinet reveals. It also provides plus 3 mm and minus 1 mm of cam depth adjustment, so you can move the door closer to or farther from the cabinet face to tighten gaps or clear neighboring components. The mounting plate has a 0 mm plate height, which sets the starting overlay geometry before you use the cams. As a hinge mounting plate in the Grass Nexis system, it pairs with compatible Nexis clip-on hinges so the hinge cups and mounting plates work as a matched set in cabinet runs.

Key Nexis Mounting Plate Details For Jobs

• The Nexis two cam adjustment base plate delivers plus or minus 2 mm height adjustment, so vertical door position can be fine-tuned after installation for better alignment across a bank of doors.
• The same base plate provides plus 3 mm and minus 1 mm depth cam adjustment, letting you move the door in or out relative to the cabinet front to correct reveal and close conditions without remounting.
• The plate uses a 0 mm mounting height, establishing a neutral starting point that supports consistent overlay geometry when laying out multiple cabinet openings in a project.
• The hinge attaches to the plate using a clip-on design, so the hinge can be connected or removed from the base plate without disturbing the #6 wood screw fixing points in the cabinet side.
• The cabinet side connection uses an open hole for #6 size wood screws, giving a familiar fastening method for wood cabinet sides and simplifying layout where standard screw sizing is preferred.
• The plate is a three point fixing version, providing three screw positions on the wing plate for distributing load into the cabinet side and supporting stable hinge performance.

Mounting And Adjustment For Cabinet Alignment

This screw-on Nexis hinge mounting plate installs to the cabinet side through open holes sized for #6 wood screws, so you can fasten directly into wood cabinet material with standard screws. The plate is configured for three point fixing, giving three screw locations on the wings to anchor into the cabinet side and resist shifting. With a 0 mm plate height, the mounting plate sets a baseline position before any cam adjustments are dialed in. The two cam adjustment system then supplies plus or minus 2 mm movement in height and plus 3 mm and minus 1 mm in depth, allowing post-installation tuning to door reveal and close without relocating the screw holes.

How This Nexis Plate Works In Use

Hinge Mounting Plate For Wood Cabinet Sides

This Nexis cam adjustable wing mounting plate is categorized as a hinge mounting plate in the Grass hinge base plates family, so it serves as the cabinet-side interface for compatible Nexis hinges. The cabinet side affixing method uses open holes designed for #6 size wood screws, which allows direct screw-on installation into wood cabinet sides using standard fasteners commonly stocked in woodworking shops. Its three point fixing layout spreads the attachment across three screw positions on the wing design, so hinge loads are shared over a wider area of the cabinet side. The plate height is specified as 0 mm, establishing a flat, neutral mounting plane relative to the cabinet side, which is useful when you want the hinge geometry to be driven primarily by the cam adjustments rather than an offset plate thickness. Grass America branding on this Nexis base plate identifies it as part of the Grass Nexis hinge platform, so it is intended to work in that hinge family environment where clip-on attachment is specified.

Two Cam Adjustment Supporting Door Tuning

The Nexis two cam adjustment design on this mounting plate provides plus or minus 2 mm of cam-controlled height movement, so the door can be shifted up or down after the plate is fixed with #6 screws, helping align doors across tall cabinet runs without changing screw positions. It also offers plus 3 mm and minus 1 mm of depth adjustment through the cam mechanism, giving forward and backward movement of the door relative to the cabinet front to refine reveals and achieve desired close behavior. Because the hinge affixes to the plate via a clip-on design, the hinge arm can be removed while the base plate and its adjusted cam settings stay on the cabinet, which supports service or door changes without disturbing the adjusted positions. The 0 mm plate height works with the cam ranges to define the working overlay geometry, so installers can rely on the specified cam travel to handle final alignment rather than shifting the base plate.

Common Nexis Wing Mounting Plate Questions

Selecting This Nexis Mounting Plate For Work

The Nexis cam adjustable wing mounting plate from Grass America combines a 0 mm plate height with plus or minus 2 mm height and plus 3 mm and minus 1 mm depth cam adjustment, so it supports precise door alignment in cabinet runs. Its screw-on, three point fixing pattern using open holes for #6 wood screws anchors directly into wood cabinet sides, while the clip-on hinge connection lets the hinge arm engage the mounted plate without disturbing screw locations. For projects specifying Grass Nexis hinge systems, this hinge mounting plate provides the defined adjustment ranges and mounting pattern needed to support repeatable door fit across similar cabinet layouts.