Nexis Cam Adjustable Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm

Nexis Cam Adjustable Mounting Plate For Cabinet Hinges

Nexis cam adjustable mounting plate gives you a Grass America hinge base that supports precise door alignment on cabinet jobs. The plate belongs to the Grass Nexis line, so it matches hinges designed for this system and keeps your hardware selection consistent across a project. The 3-point fixing layout creates three wood-screw anchor points, spreading load into the cabinet side for a solid mount that resists movement under repeated door use. Nickel-plated steel provides a hard, smooth surface, so hinge components ride cleanly during adjustment and long-term operation in normal cabinet environments. The screw-on design lets you mount the plate directly to the cabinet side with #6 x 5/8 inch flat head wood screws, tying it into standard shop fastening routines and bits. With its 8mm plate configuration and Nexis cam system, this mounting plate forms the connection between cabinet side and hinge arm.

Key Mounting Plate Details That Support Your Work

• The Nexis cam adjustable mounting plate provides +/-2 mm of cam height adjustment, so you can shift the door up or down to straighten reveals after the hinge is mounted.
• The same Nexis base plate offers +3 mm/-1 mm of cam depth adjustment, letting you move the door closer to or away from the cabinet front for clean overlay and gap control.
• Three point fixing design uses three #6 size wood-screw points, which spreads stress into the cabinet side and helps the plate stay stable under door cycling.
• Screw-on style uses #6 x 5/8 inch flat head screws, matching common cabinet shop inventory so installers can drive the plate with familiar drivers and predictable bite in standard case materials.
• The hinge affixes to the Nexis plate with a clip-on design, so the hinge arm snaps to the plate and allows rapid mounting or removal during fitting and door adjustment.

Mounting And Adjustment Details For Nexis Hinge Plate

This Grass Nexis hinge mounting plate mounts to the cabinet side through open holes sized for #6 wood screws, giving you a direct screw-on connection into typical cabinet substrates. The 3-point fixing pattern uses three separate screw locations, so the plate locks firmly to the side panel and resists twisting when doors are opened or adjusted. Once fixed, the Nexis cam system provides +/-2 mm height adjustment and +3 mm/-1 mm depth adjustment, so you dial in door position with a driver instead of repositioning the plate. The hinge arm then engages using a clip-on connection, allowing you to hang the door after the plate is set and still come back for fine tuning without disturbing the screw pattern.

Using This Grass Nexis Plate In Cabinet Projects

Where This Nexis 8mm 3D Cam Wing Plate Fits

This Nexis 8mm 3D cam wing plate from Grass America serves as the hinge base in cabinet constructions that use Grass Nexis hinges, linking the cabinet side to the hinge arm. The 8mm plate style and wing configuration position the hinge at the correct working height relative to the cabinet side, which keeps door alignment consistent from cabinet to cabinet when the same drilling pattern is repeated. Because the plate relies on open holes for #6 wood screws, it works with common cabinet materials where wood screws are preferred, such as typical case sides and face-frame blocking prepared for screw mounting. The nickel-plated finish on the mounting plate gives the hinge interface a smooth, corrosion-resistant surface in normal indoor woodworking environments, so the hinge clips on cleanly and the cams turn predictably when you fine-tune door position.

How Nexis Cam Adjustments Help Reduce Rework

The Nexis cam adjustable mounting plate delivers +/-2 mm of cam height adjustment directly at the plate, letting installers correct small drilling variances or sagging reveals by turning the height cam instead of relocating the plate. This saves time on site, because a driver twist brings the door into line while the three-point fixing pattern stays untouched in the cabinet side. The +3 mm/-1 mm depth cam adjustment at the same plate gives similar control front to back, so overlay and side gaps can be tuned without loosening the mounting screws. By combining height and depth control in the Grass Nexis cam system, this plate lets you standardize drilling jigs, mount plates quickly with #6 x 5/8 inch flat head screws, then rely on cam movement for final fitting. The clip-on hinge connection adds another workflow advantage, letting you remove doors during finishing or interior work and then reattach them to the same precisely set plate without losing your adjustments.

Common Questions About The Grass Nexis Mounting Plate

Selecting This Nexis Plate For Your Hinge Layout

The Nexis cam adjustable mounting plate, 3-point fixing, nickel-plated and screw-on, gives cabinet builders a Grass Nexis base that combines cam adjustment with a familiar screw pattern. By using #6 x 5/8 inch flat head wood screws through the open fixing holes, the plate ties directly into standard cabinet side construction while the Nexis cams handle fine tuning. For projects built around Grass Nexis hinges, this 8mm 3D cam wing plate provides the consistent mounting geometry and adjustment ranges needed to repeat clean, accurate door alignment across a run of cabinets.