Nexis 2-piece adjustable wing mounting plate gives a Grass America Nexis hinge a dedicated mounting point on the cabinet, so the hinge clips on securely and stays aligned during door movement. This hinge mounting plate is classified as a hinge mounting plate, placing it within the core hardware that sets hinge position on the cabinet side and controls door reveal. The Nexis base plate is identified by manufacturer part number F060073159236, which ties directly to Grass America documentation when matching existing hardware in a shop or on a job. The plate is specified as an 8mm Nexis hinge mounting plate, so it suits installations designed around that 8mm system standard. For woodworking operations that standardize on Nexis hinges, this mounting plate provides the mating cabinet-side component that supports repeatable layouts.
The cabinet side fixing style is three point, so the installer has three defined mounting locations that distribute forces and help the plate sit flat to the cabinet surface. All base plates have plus or minus 2 mm of height adjustment, giving a built-in way to nudge the hinge position up or down after mounting to align doors without slotting holes. The Nexis base plate is designed for Euro screws, so it integrates with cabinet cases drilled and fastened using Euro system layouts and hardware choices. The base plate affixes to the hinge via a clip-on design, letting the hinge be attached after the plate is aligned, which supports a straightforward sequence on production lines or onsite work.
Grass Nexis base plates are constructed of high grade die-cast steel, so they serve as the structural bridge between the cabinet side and the Nexis hinge in cabinet installations. The Nexis 2-piece adjustable wing mounting plate works with Nexis hinges in cabinet assemblies where a separate plate establishes the hinge footprint on the cabinet. The plate is specified as an 8mm Nexis hinge mounting plate, meaning it slots into systems that are already laid out around 8mm components and drilling patterns. The Nexis base plate is designed for Euro screws, so it sits naturally in European-style cabinet construction that relies on that fastener pattern across cases, ends, and stretchers. With its nickel-plated finish, the plate presents a finished look inside the cabinet that visually matches typical concealed hinge hardware when doors are opened.
The cabinet side fixing style is three point, giving three defined anchor spots that help repeat the same hinge centerline and setback across multiple cabinets on a run. All base plates have plus or minus 2 mm of height adjustment, so an installer can dial in vertical door gaps after mounting rather than chasing millimeters in drilling. The base plate affixes to the hinge via a clip-on design, allowing hinges to be removed and reattached without altering the plate position, which helps preserve previous alignment during service or door replacement. Grass Nexis base plates are constructed of high grade die-cast steel, providing consistent dimensions from part to part that support predictable jig setups in a shop environment. The product is classified under hinges and hinge base plates, confirming its role as the cabinet-side foundation that sets hinge placement and influences long-term door performance.
The Nexis 2-piece adjustable wing mounting plate is a hinge mounting plate for Grass America Nexis hinges, providing the cabinet-side component that establishes hinge location.
The base plate affixes to the hinge via a clip-on design, so the hinge can be attached or removed while the plate stays fixed, helping maintain cabinet-side alignment during adjustments.
The cabinet side fixing style is three point, which spreads the load across three mounting locations and supports stable positioning on the cabinet.
All base plates have plus or minus 2 mm of height adjustment, offering vertical fine-tuning to align doors with surrounding fronts and reveals.
The Nexis base plate is designed for Euro screws, fitting projects that use Euro-style cabinet construction and matching fastener systems.
Grass Nexis base plates are constructed of high grade die-cast steel and are nickel-plated, providing structural strength with a clean metallic appearance inside cabinets.
The Nexis 2-piece adjustable wing mounting plate brings Grass America Nexis hinge installations a defined, three point cabinet-side mounting platform with plus or minus 2 mm of height adjustment. For shops and installers working in 8mm Nexis systems with Euro screws, this nickel-plated, high grade die-cast steel hinge mounting plate provides the cabinet-side component that supports consistent hinge alignment across projects. Select this Nexis hinge mounting plate when the job calls for a Grass Nexis base plate that matches Euro-style construction methods.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GF317.393.56.0015 Mfr# F060073156236 | Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 0mm | ||||
Sold in: 1 Each | GF317.393.56.0215 Mfr# F060073157236 | Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 2mm |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 30000 Each | WW54400 Mfr# 367000042096130000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 367000042096130000 - 30000/Box | ||||
Sold in: 1000 Each | WW41900 Mfr# 3670000121961 1000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000121961 1000 - 1000/Box | ||||
Sold in: 100 Each | BP606N100 Mfr# 606N-100 | Blum #6 x 5/8" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 28004573 - 100/Box |