Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 0mm

Nexis 2-Piece Wing Mounting Plate For Hinges

Nexis 2-piece adjustable wing mounting plate gives you a dedicated Grass America hinge mounting solution built around the Nexis clip-on interface, so hinge arms connect quickly while staying serviceable once the cabinet is in use. This hinge mounting plate belongs to the Grass Nexis base plate family, so it supports projects that standardize on that hinge line across a run of cabinetry. The plate is part of the hinge mounting plates product class, so it provides the fixed cabinet-side reference point that controls door position and repeatability. The mounting plate is identified by manufacturer part F060073156236, which ties directly to the Grass Nexis system when matching components on drawings or in the shop. A 0mm plate height keeps the hinge cup drilling pattern as the primary depth control, which matters when following standard boring patterns across multiple cabinets.

Key Nexis Mounting Details For Cabinet Jobs

• The Grass Nexis base plate construction uses high grade die-cast steel, which provides a rigid mounting surface that resists flexing under door load so reveals stay consistent during everyday use.
• A nickel-plated finish on the mounting plate gives the steel a protective surface, which matters in cabinet interiors where metal hardware is exposed to handling and normal shop or jobsite environments.
• The 2-piece wing plate design works with the Nexis clip-on hinge connection, which allows the hinge arm to attach and detach at the plate so doors can be removed or adjusted without disturbing the cabinet side fixing points.
• The cabinet side fixing style uses three point fixing, which stabilizes the plate on the case side so the hinge loads are spread over multiple attachment locations for better long-term alignment.
• This Nexis base plate is designed for Euro screws, which matches standard system cabinet construction where Euro screw fasteners are used in 32mm line boring for a consistent workflow.
• The mounting plate offers plus or minus 2 mm of height adjustment, which lets you fine-tune the door position vertically after installation so you can true up reveals without redrilling the cabinet.

Mounting Plate Setup And Height Adjustment

The Nexis 0mm 2-piece wing plate mounts on the cabinet side using a three point fixing pattern for Euro screws, so it ties directly into system holes already drilled for European-style construction. The plate height is specified as 0mm, which keeps the hinge reference plane close to the case side so standard door overlays and cup depths transfer cleanly from design to install. Built-in plus or minus 2 mm height adjustment on the base plate lets you shift the hinge relationship to the case after the screws are set, which speeds up fine-tuning doors along a bank of cabinets. The clip-on connection between the Nexis hinge arm and the base plate lets you handle hinge attachment as a separate step from case installation, which keeps adjustment work focused and predictable.

Using The Nexis Base Plate In Cabinet Runs

Where This Nexis 0mm Plate Fits Best

The Nexis 0mm 2-piece wing mounting plate works as the cabinet-side component in Grass America Nexis hinge installations, so it fits directly into projects built around that hinge series. Its 0mm height keeps the hinge arm anchored close to the cabinet side, which aligns well with standard 32mm system layouts when doors are bored to match Nexis specifications. Because the cabinet side fixing uses a three point pattern with Euro screws, the plate is suited to frameless or system-style casework where precision line boring is already part of the machining sequence. The high grade die-cast steel body provides a solid connection between the case and hinge arm, which supports repeated door use across multi-door runs without relying on the hinge arm alone to carry the load.

How Nexis Plate Details Support Repeatable Results

The Nexis clip-on design between base plate and hinge means the mounting plate can stay anchored to the cabinet while doors are removed or swapped, which keeps your original screw positions and height settings intact from job to job. The plus or minus 2 mm of height adjustment at the base plate lets you correct for small drilling or case construction tolerances, which reduces rework when doors need to align along long cabinet faces. Nickel plating over the die-cast steel helps maintain the plate surface as hinges are clipped on and off, which supports smooth adjustments over time instead of fighting worn contact points. The defined three point Euro screw fixing pattern gives you a repeatable installation reference, which helps when multiple installers are working from the same boring plan and expect identical hinge behavior on every cabinet.

Common Nexis Hinge Mounting Questions Answered

Selecting This Nexis Plate For Your Hinge Layout

The Grass Nexis hinge mounting plate with 0mm height, three point Euro screw fixing, and plus or minus 2 mm height adjustment gives you a defined cabinet-side reference for Nexis hinge installations. Its high grade die-cast steel body with a nickel-plated finish supports daily door use, while the 2-piece wing design and clip-on hinge connection separate case installation from door hanging. When a job calls for Grass Nexis hardware, this hinge mounting plate aligns part number F060073156236 with field installation needs so your hinge layout matches the intended Nexis system performance.