Nexis Cam Adjustable Wing Plate, 2-Point Fixing, Nickel-Plated, Screw-On, 0mm

Nexis Cam Adjustable Wing Plate For Cabinet Hinges

Nexis cam adjustable wing plate gives you a screw-on hinge mounting solution for cabinet installs using Grass Nexis hinges. As a hinge mounting plate in stamped steel, it supports Grass Nexis base plates in typical cabinet side applications where a reliable interface is needed between the hinge and the case side. The 0mm plate height sets the door position close to the cabinet side, which helps when you are working to match existing reveals or designing tight, modern layouts. Nickel plating on the stamped steel construction provides a hard surface on the plate, which helps the hinge clip-on interface stay consistent during repeated door adjustments. The two point fixing style on the cabinet side focuses mounting at two locations, so you can align the plate to layout marks and hold position for the clip-on hinge arm. Designed to attach using #6 x 5/8 inch flat head screws, it works naturally with common cabinet construction practices.

Key Wing Plate Details That Support Your Work

• The 0mm plate height keeps the hinge arm close to the cabinet side, which helps when your layout calls for minimal offset between the door and case and you want a tight, controlled reveal.
• Economy stamped steel construction provides the structural base for the Grass Nexis hinge connection, so the hinge arm has a stable surface to clip onto during installation and later adjustment.
• Nickel-plated finish on the plate creates a smooth, corrosion-resistant surface at the hinge interface, which supports long-term, repeatable opening and closing in typical cabinet environments.
• Two point cabinet side fixing concentrates mounting at two screw positions, which simplifies aligning the plate to your drilling pattern and holding that position while you mount the hinge arm.
• Open holes sized to accommodate wood screws allow you to drive #6 x 5/8 inch flat head screws directly into the cabinet side, which suits standard case construction without special inserts.

Screw-On Mounting And Cam Height Adjustment

The screw-on fixing style of this Grass Nexis base plate means you mount it directly to the cabinet side using #6 x 5/8 inch flat head screws, which suits solid wood and panel constructions commonly found in shops. The plate provides plus or minus 2 mm of height adjustment through its cam function, giving you vertical movement at the hinge connection so you can fine-tune door alignment relative to neighboring fronts. As part of the Nexis clip-on design, the hinge arm attaches to the plate after the plate is fixed, so you can set all base plates on the cabinet first and then hang doors in a controlled sequence. The 0mm plate height works with this cam adjustment range to support alignment of doors in frameless style layouts where the case side defines the reference plane.

Using The Grass Nexis Base Plate In Cabinet Runs

Where This Nexis Cam Wing Plate Fits Best

This Nexis cam adjustable wing plate serves as the hinge mounting plate in cabinet runs that use Grass Nexis clip-on hinges, creating the interface between the cabinet side and the hinge arm. As a hinge base plate in the Grass America Nexis system, it is suited to jobs where stamped steel construction and nickel plating match existing Nexis hardware on replacement work or new installations. The two point cabinet side fixing pattern lends itself to straight runs of cabinets where repeated hole spacing is used along the case side, allowing you to work from consistent drilling jigs. Open holes sized for wood screws keep the installation tied to standard #6 x 5/8 inch flat head screws, fitting common shop tooling where pilots and bits are already set for that screw size.

How Adjustment And Clip-On Design Support Results

The plus or minus 2 mm of height adjustment in this Nexis cam adjustable wing plate gives you a practical vertical range at each hinge point, so you can shift a door up or down after installation to align reveals across a bank of cabinets. When you lock in the 0mm plate height, that adjustment range operates around a fixed reference close to the cabinet side, which is useful when fronts must track evenly across tall pantry units or long wall runs. The Nexis clip-on connection between the hinge arm and this Grass Nexis base plate lets you mount plates first, then hang and adjust doors without fighting the full door weight during layout. Nickel-plated stamped steel construction maintains the geometry of the hinge interface under repeated adjustments, supporting consistent engagement when you release and reattach hinge arms during fitting or later service.

Common Questions About This Nexis Hinge Base Plate

Selecting This Nexis Plate For Cabinet Projects

This Nexis cam adjustable wing plate from Grass America gives you a 0mm hinge mounting plate with plus or minus 2 mm height adjustment, two point fixing, and a nickel-plated stamped steel body. When a project calls for a Grass Nexis base plate that screws to the cabinet side with #6 x 5/8 inch flat head screws and accepts a clip-on hinge arm, this plate matches those requirements. Use its adjustment range and consistent hinge interface to bring doors into alignment across new cabinet runs or when updating existing Nexis installations.