Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, Screw-On, 2mm

Nexis 2-D Cam Adjustable Wing Mounting Plate Use

Nexis 2-D Cam Adjustable Wing Mounting Plate describes a Grass America hinge mounting plate that sets the interface between a Nexis hinge and the cabinet, which matters when precise overlay and door alignment are needed on a job. This plate is part of the Nexis two cam adjustment base plate family, so it is designed to work within a system that offers repeatable adjustment ranges and consistent geometry across cabinets. The 2 mm height value sets the starting mounting level relative to the cabinet surface, helping installers match a specific construction standard or line boring pattern. A nickel-plated finish defines the surface treatment of the steel plate, giving a uniform appearance that pairs cleanly with common hinge finishes in visible cabinet interiors. The 2-point fixing design defines the way the plate is secured to the cabinet side, which matters when planning drilling patterns and tools.

Key Nexis Hinge Plate Details For Projects

• The Nexis two cam adjustment base plate design provides adjustable hinge mounting, which helps align doors accurately during installation or later service when reveals need correction.
• The plate offers plus or minus 2 mm of cam height adjustment, so an installer can shift the hinge position vertically without remounting, saving time when tuning door gaps.
• The cam system provides +3 mm and -1 mm of cam depth adjustment, allowing controlled in-and-out movement of the door relative to the cabinet front for better flush alignment.
• The hinge affixes to the plate with a clip-on design, creating a quick connection that helps with hanging or removing doors during construction, finishing, or service work.
• The cabinet side affixing method uses open holes for #6 size wood screws, which matches common shop stock and simplifies drilling and driving during casework assembly.
• This plate is one version within a range available in 0 mm through 8 mm heights, so the 2 mm option fits layouts that call for a slightly raised mounting plane within that system.

Mounting And Adjustment Function On This Plate

The cabinet side affixing method using open holes for #6 size wood screws defines how the plate is fastened, which suits typical cabinet carcass materials where wood screws are standard. Two point fixing means the plate is secured at two locations, giving a clear layout for drilling and helping maintain consistent plate alignment along a run of cabinets. Cam height adjustment of plus or minus 2 mm lets installers fine-tune vertical door position from the mounted baseline, which helps correct small layout or drilling tolerances. Cam depth adjustment of +3 mm and -1 mm provides controlled setback change at the hinge, allowing the door to be moved closer to or further from the cabinet face for better fit against adjacent fronts.

Using This Grass Nexis Plate In Cabinet Runs

Where This Nexis 2mm Wing Plate Fits

This product is a Nexis 2-D cam adjustable wing mounting plate in the hinge mounting plates class, so it is intended for situations where a separate plate carries the hinge on the cabinet side. The 2 mm stated height sets the mounted hinge plane off the cabinet surface at that specific offset, which matters when coordinating overlay and reveal across a bank of doors. Being a wing style mounting plate, it spans out from the hinge connection area, which influences screw spacing and the way load is spread into the cabinet side. Use of open holes for #6 wood screws defines a straightforward mounting interface, important in both shop production and field installation where standard drivers and bits are used.

How Nexis Cam Adjustments Support Consistency

Nexis two cam adjustment base plates are described as offering plus or minus 2 mm of cam height adjustment, and that range supports correcting small deviations in drilling or cabinet squareness without relocating the plate. The same system provides +3 mm and -1 mm of cam depth adjustment, translating into a controlled range for pulling the door closer or easing it away from the face, which matters when aligning with neighboring doors or panels. The clip-on hinge connection to the plate lets the hinge engage the plate quickly, which supports workflows where doors are removed for finishing or transported separately from cases. Because Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, the 2 mm model fits into a broader layout plan where different cabinet constructions or overlays may call for specific plate heights while keeping the same adjustment behavior.

Common Questions About This Nexis Hinge Plate

Selecting This Nexis Plate For Precise Door Fit

This Nexis 2-D cam adjustable wing mounting plate from Grass America combines a 2 mm height, two point fixing, and defined cam ranges for height and depth, giving installers a controlled way to set door position. The nickel-plated steel construction establishes a consistent hinge interface that looks at home in finished cabinet interiors while working within the Nexis adjustment system. For projects using Nexis two cam adjustment base plates across varied cabinet runs, this 2 mm version provides a specific offset while still offering plus or minus 2 mm vertical and +3 mm and -1 mm depth adjustment to fine-tune results.