Nexis Two Cam Frameless Base Plate with 2 Adjustment Points Open Hole for Wood Screws Die-Cast Zinc 8mm Height

Nexis Two Cam Adjustment Base Plate Use

Nexis two cam adjustment base plate is a frameless hinge mounting plate that provides structured height and depth tuning between the cabinet and door, which matters when a job calls for clean reveals and consistent alignment across multiple doors. The plate offers plus or minus 2 mm of cam height adjustment, giving installers small, repeatable vertical corrections after the hinge is mounted, which helps tighten up door gaps without redrilling. It also offers plus 3 mm and minus 1 mm of cam depth adjustment, so the door can be shifted in and out relative to the cabinet front, which is useful for flush alignment on frameless runs. The base plate is the connection point where the hinge affixes via a clip-on design, creating a firm interface that still allows straightforward removal and reattachment during fitting, finishing, or service work.

Key Nexis Hinge Plate Details For Fit

• The cabinet side affixing method uses an open hole for #6 size wood screws, giving a familiar wood-to-metal connection that seats securely into cabinet material for straightforward positioning.
• This two point fixing version supplies a pair of mounting points on the cabinet side, which stabilizes the plate under hinge load and supports consistent door operation on frameless carcasses.
• The Nexis cam system provides plus or minus 2 mm of cam height adjustment, letting installers tighten vertical reveal differences door by door without shifting the screw pattern once the plate is mounted.
• Depth travel of plus 3 mm and minus 1 mm is designed into the Nexis two cam adjustment base plate, allowing controlled in-and-out door movement to fine tune overlay and face alignment along a cabinet run.
• Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, so projects can be planned around plate height choices to match drilling patterns, overlay targets, and hinge arm geometry.

Installation And Nexis 3D Cam Adjustments

The cabinet side of this Nexis frameless base plate fastens through open holes sized for #6 wood screws, so installers can work with standard bits and drivers to pull the plate tight to the cabinet panel. The hinge affixes to the plate using a clip-on design, so once the plate is secured, the hinge arm can be snapped on and off during door fitting without disturbing the screw seating. With plus or minus 2 mm of cam height adjustment designed into the plate, vertical door position can be dialed in after fastening, providing a controlled way to balance reveals. The plus 3 mm and minus 1 mm cam depth range then lets the door sit closer to or further from the cabinet front, supporting consistent overlay across aligned doors on frameless cabinets.

Using This Grass Nexis Hinge Mounting Plate

Where The Nexis 8mm Hinge Mounting Plate Fits

This Grass Nexis two cam frameless base plate is part of the hinge mounting plates category and is intended for use where a cabinet door hinge needs a stable interface on a frameless cabinet side. The plate is described with an 8 mm height, aligning it with applications that call for that mounting height in the hinge system stack, such as specific overlay or drilling layouts. Because the base plate is die-cast zinc, it provides a rigid metal body at the hinge connection point, which supports consistent door movement on frequently used cabinet doors. Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, giving cabinet builders and installers options to match the plate height specified in their hinge plan across a full project. The product sits within the Grass America family, pairing with Grass Nexis hinge arms in assemblies where that system is specified.

Why Nexis 3D Cam Details Support Clean Results

The Nexis 8mm hinge mounting plate offers plus or minus 2 mm of cam height adjustment, providing a controlled way to bring misaligned door tops into line without moving the screw locations, which is valuable on finished cabinetry where holes are already drilled. Its plus 3 mm and minus 1 mm cam depth adjustment range means the hinge-to-plate geometry can shift forward and back, letting the door face be set to the cabinet front for even reveals across a bank of frameless doors. The hinge affixes via a clip-on design, so once the correct height and depth positions are found, the hinge can be removed and reattached during finishing or later service while preserving the adjustment settings on the plate. Two point fixing on the cabinet side distributes forces through both screw locations, helping the die-cast zinc body keep the hinge interface steady during repeated door use. The manufacturer part number F061073223236 identifies this specific Nexis 8mm 3D cam wing plate with wood screw mounting, which assists shops in matching reorders and maintaining consistent hardware throughout a job.

Common Nexis Two Cam Hinge Plate Questions

Selecting This Nexis Plate For Your Hinge Run

The Nexis 8mm hinge mounting plate from Grass America gives frameless cabinet projects a die-cast zinc base with defined 3D cam adjustment ranges, which is useful when controlled door alignment is part of the specification. Its open hole design for #6 size wood screws lets installers tie directly into cabinet sides using familiar fasteners, while the clip-on hinge interface keeps adjustments accessible throughout the job. With Nexis two cam adjustment base plates available in 0 mm through 8 mm heights, this 8 mm version can be chosen where the hinge plan calls for that specific height. For woodworking shops and installers using Grass Nexis hinge systems, this mounting plate supports repeatable, system-based hardware layouts across cabinets.