Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, Screw-On, 4mm

Nexis 2-D Cam Adjustable Wing Mounting Plate Use

Nexis 2-D cam adjustable wing mounting plate describes a Grass America hinge mounting plate that provides controlled adjustment between the cabinet and the door. This mounting plate belongs to the Nexis family of cam adjustment base plates, so it is designed around precise, repeatable hinge alignment. The 4mm height identifies the mounting offset this plate establishes, which matters when matching hinge geometry across multiple doors in a run. Nickel-plated construction provides a hard, smooth surface at the hinge connection point, which supports consistent door movement during regular use. The plate is a screw-on style, so it fastens directly to the cabinet side using wood screws and creates a fixed reference for the hinge arm. As a hinge mounting plate, it works together with a compatible Nexis hinge that attaches using a clip-on connection, allowing straightforward mounting at this plate location.

Key Nexis Mounting Plate Details For Projects

• The Nexis two cam adjustment design provides plus or minus 2 mm of cam height adjustment, allowing small vertical changes after mounting so the door reveal can be tuned across a cabinet run.
• The same Nexis cam system provides plus 3 mm and minus 1 mm of cam depth adjustment, which lets the installer move the door toward or away from the cabinet face for improved overlay and alignment.
• The cabinet side affixing method uses an open hole pattern for #6 size wood screws, which simplifies layout for wood cabinet construction and gives a familiar fastener interface for installers.
• The mounting plate is a two point fixing version, so it is held by two screw positions that establish the plate location and support the hinge load in normal cabinet applications.
• Nexis two cam adjustment base plates are available in 0 mm through 8 mm heights, and this 4mm plate fits within that range for situations where a mid-range offset suits the hinge and door design.
• The Nexis design uses a clip-on connection where the hinge affixes to the plate, creating a defined mounting point that allows the hinge arm to be attached or removed at this plate without disturbing the screw positions.

Mounting And Adjustment Details For Nexis Plate

This Grass Nexis hinge mounting plate is specified as a screw-on style with an open hole layout for #6 size wood screws, so it mounts directly to the cabinet side using common wood-screw drilling patterns. The two point fixing design means two screw positions secure the plate, which sets a clear reference line for the hinge arm and supports consistent door spacing when repeating the layout on multiple openings. With its 4mm height, the plate establishes a fixed mounting offset that works within the Nexis 0 mm through 8 mm height system, giving a known starting point for cam adjustments. Once mounted, the plus or minus 2 mm cam height and plus 3 mm/minus 1 mm cam depth adjustments built into the Nexis system allow fine-tuning of door position without altering the screw-on plate location.

Using The Grass Nexis Plate In Cabinet Work

Where This Nexis 4mm Wing Plate Fits

This Grass Nexis 4mm wing mounting plate belongs to the hinge mounting plates category, so its role is to create the interface between the cabinet side and the Nexis hinge arm in a concealed hinge system. The plate is identified as a wing style, which means the body extends to either side of the screw positions, spreading the load across the cabinet side where the #6 size wood screws fasten. Because it is a 4mm height version within the Nexis 0 mm through 8 mm plate range, it suits applications that require a moderate offset between the cabinet side and the hinge pivot to match a specific door construction or desired overlay. The nickel-plated finish on this steel plate provides a durable contact surface at the hinge clip area, supporting long-term use in typical cabinet environments where metal-to-metal contact occurs at the hinge connection.

How Nexis Cam Adjustments Support Clean Results

This Grass Nexis cam adjustment base plate provides plus or minus 2 mm of cam height adjustment, so after the plate is screwed to the cabinet side, the installer can shift the hinge position slightly up or down to bring doors into a consistent reveal. That same cam system delivers plus 3 mm and minus 1 mm of cam depth adjustment, which allows the hinge and door to move closer to or farther from the cabinet front for better overlay control and flush alignment. Because the hinge affixes to the plate through a clip-on design, these adjustments can be carried out at the hinge interface while the two point fixing screws keep the plate anchored. This workflow lets an installer mount all plates using the open holes for #6 wood screws, then use the Nexis cams to refine door gaps and depth without relocating the screw-on plate.

Common Nexis 4mm Wing Mounting Plate Questions

Selecting This Nexis Plate For Hinge Layouts

This Grass Nexis 2-D cam adjustable wing mounting plate with 4mm height, two point fixing, and open holes for #6 wood screws offers a defined setup for Nexis hinge layouts. The nickel-plated steel construction and Nexis cam height and depth adjustments give a stable base for dialing in cabinet door reveals. For projects built around Nexis hinges that use the clip-on interface, this mounting plate provides the specified 4mm offset and adjustment range needed to align doors across a run using the Nexis system.