Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 2mm
Description
Nexis 2-Piece Plate For Precise Cabinet Hinges
Nexis 2-piece adjustable wing mounting plate gives you a dedicated hinge mounting solution built around Grass Nexis hinges. The plate belongs to the hinge mounting plates class, so it forms the cabinet-side interface that positions and supports the hinge in service. Grass Nexis base plates use a clip-on design to attach the hinge, which lets you remove or hang doors without disturbing the cabinet side fixing. The 2mm plate height establishes a consistent reference level between cabinet and door, helping maintain even reveals across a run. Construction in high grade die-cast steel creates a solid base for the hinge arm, so loaded doors stay supported at the mounting points. A nickel-plated finish provides a hard surface at the contact areas, supporting repeated hinge removals and adjustments over the life of the cabinet.
Key Nexis Mounting Details For Cabinet Work
- The cabinet side fixing style uses three point locations, giving the plate a stable footprint on the panel so the hinge load is spread across multiple fastenings.
- All Grass Nexis base plates provide plus or minus 2 mm of height adjustment, so you can fine-tune the door position vertically after mounting without redrilling panel holes.
- The clip-on design between hinge and mounting plate lets you detach the door from the plate, which speeds up finishing, transport, or future hinge replacement while retaining the original mounting position.
- High grade die-cast steel construction forms a rigid mounting platform, supporting consistent hinge alignment under normal cabinet door loads over repeated openings.
- The nickel-plated surface gives the working areas of the plate a smooth metal interface, which helps the clip-on hinge connection operate cleanly through repeated on-and-off cycles.
Three-Point Euro Screw Mounting And Adjustment
This Nexis base plate is designed for Euro screws, so it fits into standard European-style cabinet construction where those screws are used in the side panel. The three point cabinet side fixing pattern positions the plate using three screw locations, which helps keep the hinge reference line stable against the cabinet side. All Nexis base plates offer plus or minus 2 mm of height adjustment, giving you a small vertical correction range that can be used to align doors with neighboring fronts. The 2mm plate height works as part of the Grass Nexis system geometry, setting the hinge arm at the correct distance from the cabinet surface for that series.
Using This Grass Nexis Base Plate In Projects
Where This Nexis Base Plate Fits Best
The Grass Nexis hinge mounting plate is intended for use wherever Grass Nexis hinges are specified, so it serves as the cabinet-side component that receives the hinge arm. Its 2mm height positions the hinge relative to the cabinet wall in that system, which supports consistent door overlay or gap in Nexis-based layouts. The three point cabinet side fixing layout, used with Euro screws, suits European-style cabinet side construction where pre-bored or system holes take those fasteners. Because the hinge attaches by clip-on design, the plate stays on the cabinet while the door can be handled separately, so the cabinet side reference is protected during finishing or later service.
Why Nexis Adjustment And Materials Support Results
The plus or minus 2 mm of height adjustment built into all Nexis base plates allows for controlled vertical tuning of the door position, which helps correct small drill or panel tolerances without reworking the cabinet. Using high grade die-cast steel for the base plate body gives the hinge a firm foundation, so the mounting geometry remains stable under regular door use. The nickel-plated finish on the plate creates a hard, smooth interface around the clip-on connection, supporting repeated hinge attachment or removal while maintaining a predictable feel. The dedicated Nexis 2-piece wing mounting layout means hinge and plate are designed as a system, so the 2mm plate height, Euro screw pattern, and adjustment range work together to keep door lines consistent across multiple cabinets.
Common Nexis 2mm Mounting Plate Questions
What type of hinges use this Grass Nexis mounting plate?
The Grass Nexis base plate is constructed for the Grass Nexis hinge system, so it serves as the cabinet-side mounting partner for Nexis hinge arms in that product line.
How does the 2mm plate height affect cabinet door alignment?
The 2mm plate height sets the hinge arm position relative to the cabinet wall, so Nexis layouts can achieve consistent overlay or gap based on that fixed mounting geometry.
What is the benefit of three point cabinet side fixing?
The three point fixing style spreads the hinge load over three screw locations in the cabinet side, which helps keep the plate stable against twisting or shifting under door movement.
How do the plus or minus 2 mm of height adjustment help?
The plus or minus 2 mm height adjustment on Nexis base plates lets you move the door slightly up or down after mounting, so small drilling or panel variations can be corrected.
Why is the Nexis base plate made from die-cast steel?
The high grade die-cast steel construction provides a rigid base for the hinge arm, so the mounting geometry resists deformation as doors are opened and closed in normal use.
What is the role of the nickel-plated finish on this plate?
The nickel-plated finish forms a hard, smooth surface around the working areas of the plate, so the clip-on hinge interface operates cleanly through repeated attachment and removal.
Selecting This Nexis Plate For Euro Screw Cabinets
The Nexis 2-piece adjustable wing mounting plate, 3-point fixing, nickel-plated, for Euro screws, 2mm, gives you a defined mounting solution for Grass Nexis hinges in system-based cabinet construction. When Grass Nexis hinges, Euro screw cabinet sides, and this 2mm die-cast steel plate are used together, the hinge arm, door position, and cabinet interface share a common geometry, which supports consistent door alignment across a project. For projects built around the Grass Nexis hinge system and three point cabinet side fixing, this base plate provides the cabinet-side element that ties the hinge layout to the panel.
