Nexis Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm

Nexis Adjustable Wing Mounting Plate For Hinges

Nexis adjustable wing mounting plate gives installers a die-cast steel base plate that works with Grass Nexis clip-on hinges. The plate forms the cabinet-side connection so the hinge arm can clip onto a solid, repeatable reference point on the case. Its wing style layout spreads the fixing points outward, which helps distribute loads over more cabinet material during daily door use. Nickel-plated finish on the base plate provides a hard metal surface, which supports smooth hinge movement when paired with compatible Grass Nexis hinges. Three-point fixing design on the cabinet side creates a stable footprint, giving you a rigid mount that resists twisting when doors are cycled. The 8mm specification defines the plate height within the Nexis system, which matters when matching hinge geometry across multiple doors on the same run. Screw-on attachment provides a familiar, drill-and-drive workflow for both shop and field work.

Key Nexis Base Plate Details For Installers

• High grade die-cast steel construction supplies a solid base for Grass Nexis hinges, which supports long-term door function in cabinet applications using this mounting style.
• Three point cabinet side fixing style sets three fastener locations, helping keep the plate square and stable on the case for consistent hinge alignment across doors.
• Plus or minus 2 mm of height adjustment in the base plates allows fine-tuning of door reveal at the cabinet, helping installers dial in margins after the hinges are clipped on.
• Open hole design to accommodate wood screws matches common shop drilling patterns, which lets installers use #6 x 5/8 inch flat head screws in a straightforward screw-on process.
• Clip-on hinge interface means the plate affixes to the hinge via a clip-on design, so hinge arms can be attached or removed quickly during fit-up and door adjustment.
• Nickel-plated finish on the mounting plate gives a clean metal surface in the cabinet interior, which coordinates with typical hinge finishes in professional casework.

Installation And Adjustment Details For Nexis Plate

The Grass Nexis base plate uses a screw-on cabinet side fixing style, so installation follows a standard layout, drill, and drive sequence familiar to cabinet shops. Three-point fixing provides predictable screw locations, helping jigs and templates line up accurately for repeat work. Open hole configuration is designed to accommodate wood screws, allowing direct fastening with #6 x 5/8 inch flat head screws into cabinet material. Plus or minus 2 mm of height adjustment on the base plate serves as the primary door-height fine-tuning range once the hinge arm is clipped on. This adjustment band lets installers refine reveals without moving the cabinet or door, supporting quick touch-ups during installation or later service work on Nexis hinge runs.

How This Grass Nexis Base Plate Works In Use

Where This Hinge Mounting Plate Is Applied

This Grass Nexis base plate serves as the cabinet-side mounting element within the Nexis hinge system, so it sits on the case interior where the hinge arm engages. The wing plate layout positions mounting points laterally from the hinge centerline, creating a wider stance on the cabinet side panel. Because the design uses three-point fixing, each plate anchors at three spots on the case, helping the door load transfer across a broader area of wood or composite. The 8mm plate specification defines its role in achieving the correct overlay or inset geometry within compatible Nexis hinge setups. Nickel-plated finish visually matches typical Nexis hinge arms, which keeps the hardware appearance consistent inside the cabinet whenever doors are opened.

Why Nexis Adjustment And Clip-On Design Matter

The Nexis adjustable wing mounting plate offers plus or minus 2 mm of height adjustment in the base plate itself, giving installers a controlled way to correct minor drilling variances or case irregularities. By shifting the plate within this range, door alignment can be refined while the casework remains fixed, which is especially helpful when setting reveals across banks of doors. The clip-on interface between the Grass Nexis hinge and this base plate allows the hinge arm to attach to the plate without loose alignment steps at every door. That clip-on connection speeds up hanging and removal during finishing, transport, or hardware service because the base plate stays registered on the cabinet. Die-cast steel construction of the plate provides a rigid structure under the hinge clips, helping maintain alignment after repeated door cycles in everyday cabinet use.

Common Questions About This Nexis Mounting Plate

Selecting This Nexis Plate For Your Hinge Run

The Grass America Nexis adjustable wing mounting plate with three-point fixing provides a defined 8mm plate specification, a plus or minus 2 mm height adjustment range, and a clip-on hinge interface. These verified details support installers planning Nexis hinge runs that depend on repeatable geometry and straightforward screw-on cabinet mounting. When a hinge layout calls for an 8mm Nexis wing plate with open holes for wood screws and nickel-plated die-cast steel construction, this mounting plate matches those requirements for cabinet-side hinge mounting.