Nexis Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 4mm
Description
Nexis Adjustable Wing Mounting Plate For Cabinet Hinges
Nexis adjustable wing mounting plate defines this Grass America hinge mounting solution for cabinet applications where a precise 4mm base height is required. The plate belongs to the Nexis family of hinge mounting plates, so it works as the cabinet-side partner to Nexis hinges in a typical hinge assembly. Its 4mm plate height sets the hinge position off the case side at a consistent distance, which supports repeatable door reveals from cabinet to cabinet. Being part of the Grass Nexis base plate line, it supports jobs where an installer wants to standardize on one hinge system across a project and keep mounting geometry predictable from box to box during layout.
Key Nexis Mounting Plate Details For Installers
- The Nexis adjustable wing mounting plate is designed with a 3-point fixing style on the cabinet side, which spreads load at three anchor locations and supports stable attachment on the cabinet side panel under normal hinge use.
- A nickel-plated finish on this Nexis adjustable wing mounting plate covers the high grade die-cast steel body, which provides a clean metallic appearance in the cabinet interior while the steel core supports structural performance in the hinge area.
- This Nexis adjustable wing mounting plate is constructed of high grade die-cast steel, which creates a rigid base under the hinge and supports consistent operation at the hinge pivot over time on typical cabinet doors.
- The Nexis adjustable wing mounting plate provides plus or minus 2 mm of height adjustment at the base plate, which lets an installer fine-tune door alignment vertically relative to the cabinet after the hinge is mounted.
- An open-hole design on this Nexis adjustable wing mounting plate is sized to accept #6 x 5/8 inch flat head screws, so the plate can be fastened directly to wood cabinet sides using that screw type in a straightforward screw-on installation.
Installation And Adjustment Details For Nexis Plate
This Nexis adjustable wing mounting plate fastens to the cabinet side through its three-point fixing pattern using #6 x 5/8 inch flat head screws into wood, so installers can tie the plate directly into the case side. The open-hole layout is specifically arranged for those screws, which simplifies bit selection and drilling patterns on site. Once secured, the plate offers plus or minus 2 mm of height adjustment, allowing vertical tuning of the hinge position to refine door gaps along the run. The Nexis base plate connects to the hinge using a clip-on interface, which lets the hinge arm latch onto the plate during installation in a single motion without separate tools.
Using This Nexis Plate In Cabinet Work
Where The Nexis Wing Mounting Plate Fits
This Nexis adjustable wing mounting plate serves as a hinge base plate in cabinet work where Grass Nexis components are specified. Its 4mm plate height sets the hinge interface off the cabinet side at a defined distance, which establishes the starting geometry for overlay or inset decisions determined by the overall hinge system. The wing-style shape combined with the 3-point fixing pattern gives the installer three screw locations into wood, distributing stress across the case side in typical door cycles. Because the plate is engineered as part of the Grass Nexis base plate family, it suits projects that standardize on Nexis hinge technology, keeping drilling patterns and adjustment behavior consistent across multiple openings.
How Nexis Plate Details Support Accurate Results
The plus or minus 2 mm height adjustment built into the Nexis adjustable wing mounting plate directly supports fine-tuning door reveals, since the installer can nudge the cabinet-side hinge position up or down after initial screw placement without redrilling the case. The nickel-plated finish over the high grade die-cast steel benefits interior cabinet work by combining an orderly metallic look with a rigid structure under the hinge, supporting dependable motion at the joint during regular door use. The clip-on design between Grass Nexis base plates and their hinges means the hinge arm snaps onto this plate once it is fixed to the cabinet, which streamlines hanging doors in sequence and supports future removal or reinstallation of doors without disturbing the plate screws in the cabinet side.
Common Questions About This Nexis Mounting Plate
What type of hardware is the Nexis adjustable wing mounting plate?
The Nexis adjustable wing mounting plate is a Grass America hinge mounting plate from the Nexis base plate line, so it functions as the cabinet-side base for Nexis hinges in a hinge assembly.
How does the 3-point fixing style affect cabinet installation?
The Nexis adjustable wing mounting plate uses a 3-point fixing style on the cabinet side, so three screw positions spread load and help keep the hinge base stable on the case material during door operation.
What height adjustment does this Nexis hinge mounting plate offer?
The Nexis adjustable wing mounting plate provides plus or minus 2 mm of height adjustment, allowing vertical shifts of the hinge position to refine door alignment and reveals without moving the screw pattern.
Which screws work with this open hole Nexis base plate design?
The Nexis adjustable wing mounting plate uses an open-hole layout sized for #6 x 5/8 inch flat head screws, so installers can fasten directly into wood cabinet sides using that specific screw format.
What is the material and finish of the Grass Nexis base plate?
The Nexis adjustable wing mounting plate is made from high grade die-cast steel with a nickel-plated finish, providing a rigid hinge base with a neat metallic appearance in the cabinet interior.
How do Nexis hinges connect to this Grass Nexis base plate?
The Nexis adjustable wing mounting plate uses a clip-on design to affix to the hinge, so the hinge arm snaps onto the plate during installation for quick mounting and removal.
Selecting This Nexis Plate For Your Hinge Runs
Choose the Nexis adjustable wing mounting plate when a 4mm Grass Nexis hinge base height, three-point fixing in wood, and plus or minus 2 mm of height adjustment match your cabinet layout. Its high grade die-cast steel body with nickel-plated finish provides a defined mounting interface for Nexis hinges. The open-hole design for #6 x 5/8 inch flat head screws and the clip-on hinge connection support efficient cabinet-side installation across multiple doors.
