Nexis Cam Adjustable Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 2mm

Nexis Cam Adjustable Mounting Plate For Hinges

Nexis cam adjustable mounting plate describes this Grass America hinge mounting plate designed for Nexis hinges, so installers get a purpose-built base plate rather than a generic part. The plate is a screw-on, 3-point fixing design, so it fastens securely to the cabinet side for stable hinge support. The mounting plate has an open hole sized for #6 wood screws, so it pairs with common cabinet construction methods. This version has a 2mm plate height, so it establishes a consistent starting overlay relationship between door and cabinet. The plate is nickel-plated, so the surface resists normal handling wear during installation and adjustment. Grass Nexis two cam adjustment on the base plate provides plus or minus 2 mm of cam height adjustment, so installers can fine-tune door reveal without remounting. The same cam system offers plus 3 mm and minus 1 mm of cam depth adjustment, so the door can be brought closer or moved slightly away from the cabinet.

Key Mounting Plate Details For Cabinet Work

• This hinge mounting plate is part of the Grass Nexis two cam adjustment base plate family, so it matches the geometry and adjustment ranges expected for Nexis hinge applications and keeps hardware consistent across a run of doors.
• The plate offers plus or minus 2 mm of cam height adjustment, so vertical door alignment can be corrected after the plate is installed, reducing time spent on drilling new holes.
• The plus 3 mm and minus 1 mm cam depth adjustment allows controlled in-and-out positioning of the door, so face alignment with adjacent fronts or face frames can be refined without changing plate location.
• Hinge affixes to the plate via a clip-on design, so hinges can be attached or removed after the plate is mounted, which helps when finishing interiors or adjusting doors in tight cabinet runs.
• The cabinet side uses an open hole for #6 size wood screws and three point fixing, so the load from the door is distributed at three locations and works with standard #6 x 5/8 flat head wood screws.

Screw-On 3-Point Fixing For Stable Installation

This screw-on Nexis cam adjustable mounting plate uses three point fixing on the cabinet side, so the hinge load is supported at three screw positions for added stability on typical cabinet materials. The open hole pattern is designed for #6 size wood screws, so installers can use familiar #6 x 5/8 inch flat head wood screws and work within standard drilling routines. Because the hinge attaches with a clip-on design, plates can be installed first and doors hung afterward, simplifying handling in the shop or onsite. The 2mm plate height establishes a predictable reference plane for the hinge arm, so alignment adjustments happen within the cam ranges rather than by shifting the plate. With cam height and depth adjustments built into the plate, installers can dial in reveal and depth after the screws are set, which supports efficient fitting on multi-door jobs.

Using This Grass Nexis Mounting Plate In Projects

Where This Nexis 2mm Plate Fits Best

This Nexis 2mm 3D cam wing plate functions as a hinge base plate in cabinet constructions that are set up for Grass Nexis hinge systems, so it integrates into projects already using that hardware line. The mounting plate is classified under hinges and hinge base plates, so it suits cabinet doors that need a dedicated base plate component between the cabinet side and hinge arm. Its screw-on design with open holes for #6 wood screws works where installers are fastening directly into cabinet sides made for wood screw attachment. Three point fixing spreads the load from the hinge and door across three screw locations, so it supports repeated door movement in typical cabinet installations. The nickel-plated finish fits well in concealed hinge environments where a clean metal surface supports smooth contact with hinge parts. With a 2mm height, the plate is appropriate where the hinge layout is based on that specific mounting height.

Why The 3D Cam Adjustment Improves Results

The Grass Nexis two cam adjustment built into this mounting plate offers plus or minus 2 mm of cam height adjustment, so installers can move the door up or down relative to the cabinet opening without relocating the plate, which protects the cabinet side from extra drilling. The plus 3 mm and minus 1 mm cam depth adjustment lets the door sit closer to or slightly away from the cabinet, so reveals along adjacent doors and faces can be tuned precisely for a consistent appearance across a bank of cabinets. Because the hinge uses a clip-on connection to the plate, doors can be removed and reattached while preserving all cam settings, which helps during finishing or later service. The 2mm plate height provides a fixed base level so all fine-tuning falls within the cam ranges, making it easier to repeat settings from one cabinet to the next. In combination, the 3D cam adjustments and screw-on three point fixing support repeatable alignment on both new installations and hardware updates.

Common Questions About Nexis Cam Mounting Plate

Selecting This Plate For Nexis Hinge Projects

The Nexis cam adjustable mounting plate with 2mm height, 3-point screw-on fixing, and Grass Nexis two cam adjustment provides a defined, adjustable base for Nexis hinge installations. When a project calls for a nickel-plated hinge mounting plate that works with #6 wood screw attachment and clip-on hinge connection, this specific Grass America plate offers those characteristics in one component. For cabinet work laid out around Nexis hinge geometry and needing cam-based height and depth tuning at the plate, this part number aligns with that requirement and supports efficient door fitting.