CompX Timberline Cam Lock, 3/4" Cylinder Size, Horizontal Mount with 3/32" Off-Set Cam - CB-088
Description
CompX Timberline Cam Lock For 3/4 Inch Panels
CompX Timberline cam lock gives you a 3/4 inch cylinder size that works with 3/4 inch thick material, so the cylinder length matches typical cabinet and furniture panel stock without awkward projection or recessed mounting problems. The CB-080 cylinder body is designed for horizontal mount applications, which positions the cam action correctly in casework where the lock body lies on its side along the panel edge. All locks require a 16.5 mm diameter bore hole, so a single, precise boring operation prepares the panel for a snug, repeatable fit. The 90 degree rotation operation turns the cam through a quarter turn, giving you a clear locked or unlocked position with minimal key travel. Locks must be installed to lock in a counter clockwise position, which standardizes key direction across a run of doors or drawers for consistent use.
Key Cam Lock Details For Cabinet Projects
- The 3/4 inch cylinder size matches the design for 3/4 inch thick material, so the lock body seats properly in common cabinet stock without extra layout adjustments.
- The CB-080 cylinder body part number identifies this specific CompX Timberline cam lock setup, making reorders or matching existing locks straightforward on repeat jobs.
- The required 16.5 mm diameter bore hole sets a clear drilling spec, so machining can be done in advance or on CNC with reliable, consistent fit from panel to panel.
- The 90 degree rotation function limits key travel, so users go from open to locked in a simple quarter turn that is easy to align with the cam strike position.
- The requirement to lock in a counter clockwise position standardizes key direction, so banks of doors or drawers operate the same way and reduce user confusion.
Cam Lock Mounting And Bore Hole Setup
This CompX Timberline cam lock is designed to mount in 3/4 inch thick material with a 3/4 inch long cylinder, so the lock body spans the panel depth correctly without needing spacers or shims. All locks require a 16.5 mm diameter bore hole, giving a clear boring diameter that lines up with standard metric tooling on shop equipment. The cylinder body is described as horizontal mount, which sets up the lock to sit along the grain or edge direction common in many cabinet and fixture layouts. Locks must be installed to lock in a counter clockwise position, so the installer or shop can index the cam and strike locations around that specific rotation for repeatable door and drawer patterns.
Using CB-080 Cylinder Body In Woodworking
Where This 3/4 Inch Cam Lock Fits Best
The CB-080 cylinder body specification ties directly to a 3/4 inch long cylinder designed to mount in 3/4 inch thick material, so it suits cabinets, casework, and fixtures built from standard panel thickness without redesigning the door or drawer construction. The requirement for a 16.5 mm diameter bore hole aligns well with metric boring bits used on line-boring machines and drill presses, so the lock can be integrated into a run of holes with predictable spacing. The horizontal mount description indicates the lock body is oriented so that the cylinder lies sideways, which fits layouts where the cam needs to swing across the inside face of a door or drawer front. This orientation supports installations in cabinetry where the strike is positioned along the top or bottom edge and needs a clean, quarter-turn sweep.
Details That Support Consistent Locking Results
The 90 degree rotation feature means the CompX Timberline cam lock moves from unlocked to locked with a single quarter turn, which helps maintain tight alignment between the cam and strike because the travel is limited and predictable. Locks must be installed to lock in a counter clockwise position, so every lock keyed to this setup will share the same lock direction, simplifying how users operate multiple doors on the same project. Because all locks require a 16.5 mm diameter bore hole, shop drawings can specify that dimension once and apply it across all similar doors, reducing layout variation and rework. The 3/4 inch cylinder size matched to 3/4 inch thick material also supports more consistent edge reveals, because the cylinder sits correctly in the panel thickness and avoids interference with interior components positioned behind the door or drawer front.
Common CB-080 Cam Lock Installation Questions
What panel thickness is this CB-080 cylinder body designed for?
The CompX Timberline cam lock is designed to mount in 3/4 inch thick material, so it aligns with common cabinet and furniture panel constructions.
What bore hole size is required for this CompX Timberline cam lock?
The cylinder body requires a 16.5 mm diameter bore hole, so drilling operations can follow a clear metric size for consistent fit.
How far does the CB-080 cam lock cylinder extend through the panel?
The cam lock uses a 3/4 inch long cylinder, so it is proportioned to span the depth of 3/4 inch thick material.
How does the 90 degree rotation affect lock operation?
The 90 degree rotation moves the cam through a quarter turn, giving a short, defined key travel from open to locked.
In which direction does this cam lock secure when locking?
This CompX Timberline cam lock must be installed to lock in a counter clockwise position, standardizing key direction across installations.
What is the role of the CB-080 designation on this lock?
The CB-080 designation identifies the specific cylinder body type 080, helping match this lock to project specifications or existing Timberline setups.
Selecting This Cam Lock For Your Next Build
CompX Timberline cam lock with CB-080 cylinder body combines a 3/4 inch cylinder size, 3/4 inch thick material design, and 16.5 mm bore hole requirement, so layout and boring can follow clear dimensions. The horizontal mount orientation and 90 degree rotation support straightforward cam alignment inside cabinets and fixtures. The need to lock in a counter clockwise position defines key direction, which helps standardize user operation across doors and drawers. For projects calling for a cylinder body type 080 setup, this cam lock lines up with those requirements.
