CompX Timberline Cam Lock, 3/4" Thick, 90 Degree CCW Rotation, Horizontal Mount with Flat Cam - CB-084

CompX Timberline Cam Lock For 3/4 Inch Panels

CompX Timberline cam lock is a cylinder body and flat cam setup designed for 3/4 inch material thickness on doors or drawers, so it targets typical cabinet, furniture, desk, and locker panel construction where that thickness is standard. This CB-084 cylinder body is part of the CompX Timberline lock family, giving installers a defined choice when a Timberline cam lock is already specified across a project. The design serves door or drawer locking in cabinetry, furniture, desks, and lockers, so one part number can be used across multiple casework types on the same job. A 90 degree counterclockwise cam rotation is used to lock, which creates a short, predictable key turn that suits repetitive daily use. The horizontal mount orientation with a flat cam focuses the locking action along the panel plane, giving a straightforward approach to tying into a strike or frame detail.

Key CB-084 Cam Lock Details For Projects

• The CompX Timberline cam lock is specified for 3/4 inch material thickness, so it matches common cabinet and furniture panel builds without reworking the bore location.
• The cylinder body functions as a cam lock for doors or drawers in cabinetry, furniture, desks, and lockers, allowing one lock pattern across mixed casework runs.
• The lock is set up for 90 degree cam rotation counterclockwise to lock, giving a short throw that speeds operation and keeps handle movement consistent between openings.
• The horizontal mount layout with flat cam focuses motion along the horizontal axis of the panel, which helps align the cam with fixed strikes along the cabinet or locker frame.
• The cam length is 1-1/4 inch, so the reach from the cylinder center to the locking edge is defined for planning strikes or keeper positions.
• The part is identified as cylinder body, type 084, supporting accurate specification and reordering when a particular CompX Timberline pattern is required.

Horizontal Mount Cam Lock Fit And Setup

This CB-084 cylinder body is engineered as a horizontal mount cam lock for 3/4 inch material, so the installer works with a consistent panel thickness reference when laying out bore centers. The 1-1/4 inch flat cam length establishes a fixed distance from the lock centerline to the engaging edge, which helps align the cam to the cabinet, furniture, desk, or locker frame detail. Because the lock operates through a 90 degree counterclockwise rotation to lock, both the key movement and the cam swing follow a simple quarter-turn path, which supports repeatable alignment with matching strikes. The design as a CompX Timberline cam lock keeps the geometry and orientation matched to other Timberline components specified on woodworking and casework projects.

Using The CB-084 Cam Lock In Casework

Where This Cylinder Body Fits Best

The CB-084 cylinder body is a CompX Timberline cam lock for 3/4 inch material thickness, so it fits work where cabinet, furniture, desk, or locker doors and drawers are built around that common panel size. In cabinetry, the horizontal mount layout with flat cam directs the locking action toward side jambs or fixed rails, supporting clean engagement with simple strike plates. In furniture and desks, the same 1-1/4 inch cam length provides predictable reach to intermediate frames or dividers, which simplifies aligning multiple drawers or doors along a run. For lockers, the 90 degree counterclockwise rotation to lock gives users a quick quarter-turn motion that is easy to repeat across multiple openings in a bank of doors. Because the product is defined as cylinder body, type 084, it provides a clear reference when matching shop drawings or existing hardware schedules that call out this specific Timberline pattern.

Details That Support Consistent Locking Results

The 90 degree cam rotation counterclockwise to lock sets a fixed motion profile, so the cam moves from open to locked with a single quarter-turn that is easy to align to mating strikes during layout. This horizontal mount configuration keeps the flat cam swinging parallel to the top or bottom edge of the door or drawer, helping the installer position the cylinder so the cam meets the casework frame squarely. The 1-1/4 inch cam length defines the throw from the center of the cylinder to the edge of the cam, which supports consistent planning for clearances and engagement depth across multiple openings. As a cam lock for door or drawer locking in cabinetry, furniture, desks, and lockers, the CB-084 pattern allows the same geometric relationships to be repeated, reducing variation from one unit to the next on a project.

Common Questions About The CB-084 Cam Lock

Selecting This CB-084 Cam Lock For Your Work

The CB-084 CompX Timberline cam lock brings a defined 3/4 inch material rating, 1-1/4 inch flat cam length, and 90 degree counterclockwise locking rotation together in a horizontal mount layout, so it matches common cabinet, furniture, desk, and locker construction. When projects call for a cylinder body, type 084 pattern from the CompX Timberline line, this cam lock gives a consistent setup for door or drawer locking across related casework.