CompX Timberline Cam Lock For 3/4 Material

CompX Timberline cam lock for 3/4 material thickness gives you a dedicated locking point for cabinet doors or drawers, so stored contents stay secured in typical cabinetry and furniture setups. This CB-085 cylinder body, described as CYLINDER BODY, TYPE 085, defines the lock housing that pairs with a separate CompX Timberline lock plug, so you can select the plug that matches your keying plan on the same system. Door or drawer applications in cabinetry, furniture, desks, and lockers are specifically called out, so this lock aligns directly with common shop and millwork projects. A 90 degree cam rotation CCW to lock establishes a clear quarter-turn motion from open to locked position, which keeps operation predictable across doors and drawers. The horizontal mount layout lets the cylinder sit in a consistent orientation, helping you line up the cam and strike position during layout and boring.

Key CB-085 Cam Lock Details For Projects

• The CB-085 cam lock for 3/4 material thickness is tailored to doors or drawers built from that stock size, so boring and edge distances line up with standard cabinet components.
• A 90 degree cam rotation CCW to lock delivers a short, defined throw, which helps prevent over-rotation and keeps the locked position repeatable across multiple units.
• The horizontal mount orientation sets the cylinder body in a fixed horizontal position, simplifying layout when you align the cam with keeper hardware on doors or drawers.
• A 15/32 off-set cam installed spaces the cam face away from the cylinder centerline, helping the cam reach the back of doors, drawers, or frame edges at 3/4 thickness.
• The cam length 13/16 dimension defines how far the cam extends, helping match the throw to typical cabinet and furniture clearances at the back side of the panel.
• The note that the lock plug not included and order CompX Timberline lock plug separately identifies this unit as the cylinder body only, so keying is handled through the separate plug choice.

Horizontal Mount Cam Lock Installation Behavior

The horizontal mount design on this CompX Timberline cam lock sets the cylinder so the keyway and cam rotate around a horizontal axis, stabilizing how the cam sweeps past the strike area. A 90 degree cam rotation CCW to lock defines the direction and extent of movement, which matters when you place the strike or frame contact so the cam fully engages at the quarter-turn. The 15/32 off-set cam installed moves the contact surface away from the mounting axis, letting the cam bridge the gap between the cylinder body and cabinet framing. With cam length 13/16, the locking arm reaches a defined distance behind the panel, which supports consistent engagement across similar door or drawer constructions using 3/4 material thickness.

Using The CB-085 Cylinder Body In Casework

Where This Cam Lock Fits In Cabinetry

This CB-085 CompX Timberline cam lock for 3/4 material thickness is specified for door or drawer applications in cabinetry, furniture, desks, and lockers, tying directly into typical casework jobs. In cabinet doors, the cylinder body passes through the 3/4 panel while the 15/32 off-set cam installed reaches toward a frame or strike, so the cam rotation pulls the door against the cabinet. In drawer fronts built from the same 3/4 stock, the same 13/16 cam length lets the arm catch a fixed receiver or case edge, so one lock style can be applied across drawer banks. Because the product is described as CYLINDER BODY, TYPE 085 and CB-085 cam lock cylinder body, it serves as the main mechanical housing that accepts the separately ordered CompX Timberline lock plug, letting the same body be used wherever that plug system is standard. Door, drawer, and locker applications listed in the description define its range in both residential and commercial woodworking.

Details That Support Repeatable Lock Results

The defined 90 degree cam rotation CCW to lock on this CB-085 cam lock means every installation uses the same quarter-turn motion, so key rotation and cam contact remain consistent from unit to unit. By combining horizontal mount with a 15/32 off-set cam installed, the rotation path and reach are known, which simplifies repeating the same bore location and strike relationship along cabinet runs. The cam length 13/16 is also clearly specified, so the arc of the locking arm can be planned around common setback distances on case sides or stretchers when working with 3/4 material thickness. The fact that the lock plug not included and that you order CompX Timberline lock plug separately keeps the cylinder body independent from keying, supporting standardized boring while key combinations are managed through plug selection. Together, these fixed dimensions and motions help maintain predictable lock engagement in cabinetry, furniture, desks, and lockers using the CompX Timberline cam lock system.

Common Questions About The CB-085 Cam Lock

Select The CB-085 Cam Lock For 3/4 Panels

The CompX Timberline cam lock for 3/4 material thickness, identified as CB-085 cylinder body, aligns directly with door or drawer locking in cabinetry, furniture, desks, and lockers. With horizontal mount, 15/32 off-set cam installed, cam length 13/16, and 90 degree cam rotation CCW to lock, the locking motion and reach are clearly defined around common 3/4 stock. Pairing this cylinder body with a separately ordered CompX Timberline lock plug lets the same mechanical base support your chosen keying system across related casework runs.