CompX Timberline Cam Lock, 1-1/4" Cam Extension, Horizontal Mount with Off-Set Cam - CB-083

CompX Timberline Cam Lock Body For Cabinet Security

CompX Timberline cam lock gives you a horizontal mount solution built around a 1-1/4 inch cam extension, so you can reach typical cabinet and drawer strike positions from a compact cylinder body. The CB-083 cylinder body uses a 90 degree rotation, which keeps the lock action simple and predictable when you align strikes across multiple doors. All locks require a 16.5 mm diameter bore hole, letting you drill one consistent size across your run instead of juggling multiple bit diameters. The cylinder is designed to mount in 3/4 inch thick material with a 3/4 inch long cylinder, so it matches common cabinet stock thickness and avoids extra shimming. Locks must be installed to lock in a counter clockwise position, which standardizes key turn direction from one opening to the next and supports repeatable shop layouts.

Key CB-083 Cam Lock Details For Installers

• Horizontal mount with off-set cam positions the 1-1/4 inch cam extension where you need it, helping you pick up strikes on typical cabinet doors and drawers without custom brackets.
• 90 degree rotation simplifies layout because the key only turns a quarter turn between locked and unlocked, making it easier to align cams relative to strikes during assembly.
• Requirement for a 16.5 mm diameter bore hole lets you standardize drilling with a single bit size, which speeds production runs and keeps hole sizing consistent on site or in the shop.
• Design for 3/4 inch thick material with a 3/4 inch long cylinder matches common cabinet side and drawer front thicknesses, reducing the chance of over- or under-engagement of the cam.
• Counter clockwise locking direction gives you a known key motion for the locked position, so you can keep user operation consistent across banks of doors and maintain a uniform layout.

Horizontal Mount Cam Lock Installation Basics

This CompX Timberline lock uses a horizontal mount with off-set cam, so the cylinder body sits parallel to the edge of your 3/4 inch material while the cam extension reaches toward the strike line. All locks require a 16.5 mm diameter bore hole, which defines the drilling step before you insert the cylinder body from the front face. The 3/4 inch long cylinder is sized for 3/4 inch thick stock, allowing the lock body to seat correctly through the panel so the cam can rotate freely. With 90 degree rotation and a counter clockwise locking position, layout is based on a quarter-turn movement, which helps you set the strike location knowing exactly where the locked and unlocked positions land.

Using CB-083 Cam Lock Bodies In Cabinet Work

Where This Cylinder Body Type 083 Fits Best

The cylinder body, type 083, is part of the CompX Timberline cam lock family, placing it in the cam locks category for cabinet and furniture applications. It is described as a cam lock with 1-1/4 inch cam extension and horizontal mount with off-set cam, which suits cabinet doors or drawer fronts where the strike sits offset from the cylinder centerline. Design to mount in 3/4 inch thick material with a 3/4 inch long cylinder matches standard casework built from 3/4 inch panels, so it integrates directly into typical shop constructions. This structure lets you use the same lock body across a run of cabinets using that thickness, supporting consistent boring patterns and hardware layouts.

Why CB-083 Dimensions Support Repeatable Results

The 1-1/4 inch cam extension sets a predictable reach from the cylinder center, which helps position strikes so the cam reliably contacts them at the 90 degree rotation point. All locks requiring a 16.5 mm diameter bore hole means your boring jig or CNC program can repeat a single hole size, reducing variation in fit from cabinet to cabinet. The 3/4 inch long cylinder matched to 3/4 inch thick material keeps the body centered through the panel, so the cam sits in the correct plane for smooth rotation without binding. A fixed 90 degree rotation with lock in the counter clockwise position standardizes where the cam stops, which is useful when aligning multiple doors and aligning user operation expectations. The CB-083 manufacturer part number ties these specifics to a single cylinder body type, so reordering the same part preserves these fit and motion characteristics in future jobs.

Installer Questions About CB-083 Cam Lock Details

Selecting This Cam Lock Body For Your Next Build

The cylinder body, type 083, brings together a 1-1/4 inch cam extension, 90 degree rotation, and a requirement for a 16.5 mm bore hole, giving you defined dimensions for layout and boring. Its design for 3/4 inch thick material with a 3/4 inch long cylinder integrates directly into standard cabinet construction without reworking panel thickness. Choosing the CB-083 cam lock body from CompX Timberline lets you repeat the same horizontal mount, counter clockwise locking setup across projects, streamlining both shop production and field installation.