CompX Timberline Cam Lock, 1-23/32" Cam Extension, Horizontal Mount with Flat Cam - CB-087

CompX Timberline Cam Lock For Door Or Drawer

CompX Timberline cam lock is designed as a cylinder body, type 087, that handles door or drawer locking in cabinetry, furniture, desks, and lockers, so one part can serve multiple casework applications in the shop or on site. The CB-087 cam lock is set up for 3/4 material thickness, which matches common panel stock and helps avoid extra shimming or layout changes. A 1-23/32 cam extension reaches to engage strikes or frames on standard cabinet constructions, supporting consistent latch engagement across a run of units. This cylinder body uses a horizontal mount layout with a flat cam installed, so the motion stays predictable in side-mount locations along rails or stretchers. The cam is configured for 90 degree CCW rotation to lock, giving a simple quarter-turn motion that is easy to repeat across multiple doors or drawers.

Key Cam Lock Details That Support Daily Use

• The cam lock is specified for 3/4 material thickness, so it matches typical cabinet and furniture panels and helps keep boring depths and edge distances consistent across a project.
• The 1-23/32 cam length extension lets the cam reach toward cabinet frames or strike points on many standard boxes, supporting reliable engagement without reworking layouts.
• The cylinder body, type 087, defines the CB-087 configuration and helps match this lock to other CompX Timberline components in projects that repeat the same lock family.
• The horizontal mount with flat cam installed positions the cam motion parallel to the panel, which suits side-mounted locations on doors and drawers in casework runs.
• The cam lock is described for door/drawer applications in cabinetry, furniture, desks, and lockers, so it aligns with common millwork and commercial storage builds.

Horizontal Mount Cam Lock Installation Context

This horizontal mount cam lock is described for 3/4 material thickness, so boring and mounting depth can be planned around standard cabinet sides, drawer fronts, or doors without changing stock. The cam length of 1-23/32 supports layouts where the lock body sits in the panel while the flat cam swings behind a frame or strike, helping the installer align hardware to known clearances. A 90 degree CCW rotation to lock gives a clear quarter-turn motion that pairs well with typical key-operated lock plugs, simplifying how doors and drawers are secured across a bank of units. The cylinder body, type 087, ties this lock to the CB-087 part reference, which assists in matching multiple locks within the same project.

Where This CB-087 Cam Lock Fits Best

Cam Lock For Cabinetry, Furniture, Desks, Lockers

This CompX Timberline cam lock is identified for door or drawer locking in cabinetry, furniture, desks, and lockers, so it fits well in both residential and commercial casework where controlled access is needed. The design for 3/4 material thickness matches common cabinet sides, drawer fronts, and locker doors, allowing the cylinder body to seat properly in standard panel constructions. A horizontal mount with flat cam installed means the cam swings in a plane parallel to the mounting surface, which works with side-mounted strikes or frame edges often found in built-in cabinets, workstations, and locker banks. The 1-23/32 cam extension allows the cam to travel far enough behind the panel to catch behind frames, rails, or keeper bars used in these furniture and storage applications.

Rotation, Cam Length, And Lock Plug Workflow

The 90 degree cam rotation CCW to lock defines a quarter-turn motion that standardizes how doors and drawers are secured, which is helpful when many openings share the same locking direction. This predictable 90 degree movement supports consistent key handing when the proper CompX Timberline lock plug is ordered separately, so users experience the same feel at every lock point. The flat cam paired with the 1-23/32 extension creates a straight, sweeping contact path behind the door or drawer edge, improving how the cam catches behind a frame or strike in repeated cabinet modules. Because the part is identified as CYLINDER BODY, TYPE 087 and CB-087, it ties into the CompX Timberline system so installers can coordinate this body with the correct lock plug choice for their keying plan.

Common CB-087 Cam Lock Usage Questions

Selecting The Right CB-087 Cam Lock For Projects

Choosing this CompX Timberline cam lock with cylinder body type 087 aligns door and drawer security with 3/4 material thickness, a 1-23/32 cam extension, and 90 degree CCW rotation that match common cabinet layouts. For cabinetry, furniture, desks, and lockers that follow these dimensions and operation, this CB-087 configuration gives a consistent horizontal mount solution that fits into the broader CompX Timberline lock system.