CompX Timberline Cam Lock, 13/16" Cam Extension, Vertical Mount with Off-Set Cam - CB-090
Description
CompX Timberline Cam Lock For Precise Cabinet Security
CompX Timberline cam lock gives you a dedicated cylinder body solution for cabinet and casework projects where a compact lock is needed. This CB-090 cylinder body is defined by its 90 degree rotation, so the lock operates with a short, predictable throw that suits doors and panels that only need a quarter-turn to secure. All locks require a 16.5 mm diameter bore hole, so you can plan your drilling pattern around a consistent bit size on every job. The cylinder is designed to mount in 3/4 inch thick material with a 3/4 inch long cylinder, matching common cabinet stock so you do not have to change material thickness just to use this lock. The lock must be installed to lock in a counter clockwise position, which sets a clear orientation for layout across multiple doors and panels.
Key CB-090 Details That Support Your Work
- 90 degree rotation controls how far the cam travels on each turn, which helps when aligning the cam with strikes or cutouts in cabinet and fixture work.
- All locks requiring a 16.5 mm diameter bore hole standardize the drilling setup, so repetitive production or multi-cabinet runs can be laid out with one bit size.
- Design for 3/4 inch thick material with a 3/4 inch long cylinder pairs directly with common cabinet side and door thicknesses, keeping the cylinder flush and functional.
- Vertical mount with off-set cam supports layouts where the lock body sits upright and the cam needs an offset path to catch behind a frame or strike edge.
- Installation to lock in a counter clockwise position defines key rotation direction, which helps when coordinating key use and lock orientation across a full project.
Mounting And Bore Details For CB-090 Locks
This CompX Timberline lock uses a 16.5 mm diameter bore hole, so hole sizing is fixed for the CB-090 across doors, drawers, or panels you are securing. The design to mount in 3/4 inch thick material with a 3/4 inch long cylinder keeps the front of the cylinder properly positioned in typical cabinet stock. Because the lock must be installed to lock in a counter clockwise position, the key rotation and cam swing are predictable once the vertical mount with off-set cam is oriented in your layout. Together, these details let you align the cylinder body, bore, and cam path around a consistent, repeatable setup.
How This CB-090 Cam Lock Performs In Use
Vertical Mount Cam Lock In Common Cabinet Stock
This CB-090 cylinder body from CompX Timberline Lock is a vertical mount design, so the lock body is oriented upright in the panel. That orientation works with the off-set cam, which is arranged so the cam path can reach behind a frame or catch point without changing panel thickness. Because the lock is designed to mount in 3/4 inch thick material with a 3/4 inch long cylinder, it ties directly into standard cabinet construction practices using 3/4 inch sides, doors, and partitions. The 16.5 mm diameter bore hole requirement means once you set up a 16.5 mm bit or boring pattern, every lock position on the project follows the same drill size, which supports accurate, repeated hole placement in production runs.
Rotation, Locking Direction, And Cam Alignment Results
The 90 degree rotation defined for this CompX Timberline cam lock limits the key travel to a quarter-turn, which makes the lock action quick while preventing over-rotation that could misalign the off-set cam. Because locks must be installed to lock in a counter clockwise position, you know the locked state corresponds to a specific key direction, which simplifies marking and service on multi-door installations. That fixed locking direction also tells you how the off-set cam will swing behind a keeper or cabinet frame when the lock engages. With the combination of 90 degree rotation, vertical mount with off-set cam, and a bore sized at 16.5 mm in 3/4 inch material, the cylinder body, key travel, and cam reach all work together to support clean engagement and repeatable alignment across your cabinets or casework.
Common CB-090 CompX Timberline Lock Questions
What type of lock is the CompX Timberline CB-090?
The CompX Timberline CB-090 is a cam lock cylinder body with 90 degree rotation, so it functions as a compact locking point for cabinet and similar panel applications.
What bore size is required for this cam lock body?
The CB-090 cylinder body requires a 16.5 mm diameter bore hole, which sets the drill size you use when laying out lock locations in doors or panels.
How thick can the mounting material be for the CB-090?
The CB-090 is designed to mount in 3/4 inch thick material with a 3/4 inch long cylinder, matching common cabinet stock thickness for straightforward installation.
How does the 90 degree rotation affect cam lock use?
The 90 degree rotation on this cam lock limits key travel to a quarter-turn, giving a short, defined throw that helps align the off-set cam with its strike area.
What is the locking direction on the CB-090 cam lock?
The CB-090 lock must be installed to lock in a counter clockwise position, so you know the locked state corresponds to a specific key rotation direction.
How does the vertical mount with off-set cam help cabinet layouts?
The vertical mount with off-set cam lets the cylinder sit upright while the cam reaches behind a frame or keeper, supporting flexible engagement points in cabinet designs.
Select The CB-090 For Consistent Cam Lock Layouts
The CompX Timberline cam lock CB-090 gives you a cylinder body built around 90 degree rotation, a 16.5 mm bore, and mounting in 3/4 inch material with a 3/4 inch long cylinder. Those fixed dimensions and the required counter clockwise locking position help you standardize drilling, orientation, and cam travel across cabinets, drawers, and panels. For projects that use vertical mount cam locks with an off-set cam path, this CB-090 cylinder body from Wurth Baer Supply aligns well with typical woodworking layouts and repeatable shop workflows.
