CompX Timberline Cam Lock, 7/8" Cam Extension, Horizontal Mount with Off-Set Cam - CB-089

CompX Timberline Cam Lock For 3/4 Material

CompX Timberline cam lock is designed for 3/4 material thickness, so it matches standard cabinet stock in many woodworking builds and helps deliver predictable lock engagement on doors and drawers. The CB-089 cylinder body uses a horizontal mount with a 7/8 off-set cam installed, positioning the cam to catch the strike reliably when the lock body is aligned correctly. A cam length of 1-1/4 gives added reach across the back of the door or drawer edge, which supports consistent locking on common cabinet layouts. The 90 degree cam rotation CCW to lock operation gives a clear quarter-turn motion, so installers can orient the lock body to match user expectations. Lock plug not included states that the locking core is ordered separately, which lets shops match this body to existing CompX Timberline keying systems.

Key CB-089 Lock Details For Cabinet Work

• The cam lock for 3/4 material thickness aligns the locking cam with typical cabinet panel thickness, which supports reliable latching without over-travel on doors and drawers.
• The horizontal mount with 7/8 off-set cam installed places the cam off center from the cylinder, which helps the cam swing into position behind the cabinet frame or strike in tight layouts.
• The cam length 1-1/4 dimension extends the cam further across the back side of the door or drawer, which helps the lock engage solidly on wider reveals or deeper frames.
• The 90 degree cam rotation CCW to lock operation limits movement to a quarter turn, which simplifies knob orientation and key travel for end users and speeds consistent installation layout.
• The CompX Timberline lock plug ordered separately setup allows matching this cylinder body to an existing CompX Timberline lock plug system, which supports keyed-alike planning across multiple cabinets.

Horizontal Mount Lock Setup And Alignment

The horizontal mount with 7/8 off-set cam installed means the CB-089 mounts with the cylinder axis running horizontally, which orients the key turn parallel to the cabinet top rail for a clean look on many door and drawer fronts. Because this cam lock is specified for 3/4 material thickness, the body depth is suited to that panel, which positions the 1-1/4 cam length to swing behind the cabinet frame without excessive projection. The 90 degree cam rotation CCW to lock operation lets installers index the lock so the locked and unlocked positions sit at predictable clock angles, which simplifies drilling jigs and repeat work in shop runs.

Using The CB-089 Cam Lock In Cabinet Projects

Where This Cam Lock Fits In Cabinetry

This cam lock for door or drawer locking in cabinetry, furniture, desks lockers is built around a 3/4 material thickness callout, which suits many standard cabinet carcasses and door rails. In cabinetry work, the horizontal mount style supports mounting in door stiles where horizontal key movement matches the design lines, giving a tidy visual alignment. In furniture and desks lockers applications, the 1-1/4 cam length helps bridge from the front panel back to internal rails, so the cam can capture behind a structural member without needing extra parts to span the gap. The 7/8 off-set cam installed detail centers the sweep of the cam where many casework strikes sit, which supports repeatable layouts across banks of doors or drawers.

Lock Operation For Consistent Field Results

The CB-089 cylinder body uses 90 degree cam rotation CCW to lock, so the cam travels only a quarter turn between locked and unlocked positions, reducing guesswork when laying out handle orientation on multiple cabinets. Because the operation direction is specified as CCW to lock, installers can set up boring patterns and cam orientation so that every door or drawer in a run locks with the same key rotation direction, which helps building users operate different openings without confusion. The horizontal mount with 7/8 off-set cam installed keeps the cam motion in a single plane, which simplifies aligning the cam behind a face frame member or bracket. With the lock plug ordered separately, shops can standardize on one CompX Timberline lock plug pattern and drop it into each CB-089 body, which supports controlled keying plans across furniture, cabinetry, and desks lockers projects.

Common CB-089 Cam Lock Selection Questions

Choose CB-089 For Consistent Cam Lock Layouts

The CompX Timberline cam lock CB-089 ties together a 3/4 material thickness specification, horizontal mount layout, and 7/8 off-set cam installed, giving cabinet shops a repeatable pattern for door and drawer locking. The 1-1/4 cam length and 90 degree CCW rotation to lock support predictable engagement across cabinetry, furniture, desks lockers projects. With the lock plug ordered separately, this cylinder body fits into broader CompX Timberline keying plans across a job. Select the CB-089 when a horizontal cam lock geometry for 3/4 material supports your standard casework construction and layout.