
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice adjustable latch gives you a mechanical push latch specifically designed to work with Salice Push Hinges, so push-to-open cabinet doors can be set up as a coordinated system. The latch uses a screw-affixed adapter housing with a separate catch device, which creates a solid, defined interface between door and cabinet while keeping components distinct for layout and adjustment. This single, no lip, black configuration keeps the latch compact and visually discreet on modern cabinet interiors. As a mechanical solution, it suits installations where a positive push-latch action is preferred with Salice Push Hinges. The design focuses on adjustability in both depth and left-to-right directions, allowing you to dial in door position so doors sit where you want them in day-to-day use.
The adjustable push latch provides -1mm to +2.5mm of depth adjustment through a small hand turned adjuster wheel at the back of the housing, so you can fine-tune how far the door rests against the cabinet. This depth range helps you set a consistent reveal or contact point when coordinating with Salice Push Hinges. The adapter housing also offers plus or minus 2mm left-to-right adjustment via an elongated fixing screw hole, giving lateral movement for aligning the latch to the catch without relocating holes. Together, these adjustments allow the Salice adjustable latch to be set precisely so push-to-open doors activate smoothly and seat in the same position across a run of cabinets.
This Salice adjustable latch is part of the latches class within locks and latches, and is suited to cabinet work where Salice Push Hinges are already specified. Because the mechanical and magnetic push latches and catches are specifically designed to work in conjunction with Salice Push Hinges, they support push-to-open doors that depend on that hinge family. The single, no lip, black style keeps the strike interface compact at the door edge, which is useful on cabinets where minimal projection is preferred inside the case. When using the surface mounted catch, the latch arrangement can be positioned on flat cabinet surfaces, which works well in frameless constructions. When the recessed 26mm diameter by 8mm deep catch is selected, the catch can sit within a bored hole, which helps maintain a flush interior surface while still providing a defined meeting point for the adapter housing.
The depth adjustment range of -1mm to +2.5mm, controlled by a hand turned adjuster wheel at the back of the housing, allows installers to set how firmly the door meets the cabinet when closed, which affects feel and alignment alongside Salice Push Hinges. Being able to adjust depth from the housing side means the latch can be tuned after mounting to match small variations in drilling or hinge positioning. The plus or minus 2mm left-to-right adjustment through an elongated fixing screw hole lets the adapter housing shift sideways relative to the cabinet, so the catch device can meet the door in the optimal spot without remounting. This combination of depth and lateral adjustment helps reduce rework when dialing in multiple doors, since each Salice adjustable latch can be refined until push activation and closing position match across the installation.
The Salice DP4SN3 latch is a mechanical push latch in the latches class, so it serves as the push-to-open and holding component within a cabinet locking and latching setup.
The Salice adjustable latch is specifically designed to work in conjunction with Salice Push Hinges, so the push-to-open motion relies on a coordinated hinge and latch arrangement.
The adjustable push latch provides -1mm to +2.5mm of depth adjustment, allowing the resting position of the door against the cabinet to be set within that range for a consistent close.
The Salice adjustable latch uses an elongated fixing screw hole to provide plus or minus 2mm left-to-right adjustment, letting the housing shift sideways for better alignment to the catch.
The push catches come in surface mounted or recessed 26mm diameter by 8mm deep versions, giving a choice between mounting on the surface or boring into the cabinet material.
Single, no lip, black identifies a compact latch configuration without an extended lip in a black finish, which keeps the latch visually discreet on cabinet interiors.
The Salice adjustable latch, single, no lip, black, gives you a mechanical push latch built to work with Salice Push Hinges, so hinge motion and latching are planned together. With -1mm to +2.5mm depth adjustment and plus or minus 2mm left-to-right adjustment, the latch can be tuned to match door reveals and activation points across your cabinets. The option of surface mounted or recessed 26mm diameter by 8mm deep catches lets you align the latch approach with your preferred cabinet construction method. For projects calling for Salice Push Hinges and a coordinated push-to-open latch point, the Salice adjustable latch DP4SN3 aligns hinge, catch, and latch action into a single, adjustable solution.
Sold In: 1 Each