Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge positions doors at a half overlay on both face-frame and frameless cabinets, with a self-open mechanism and a screw-on mount in a nickel finish.
Half overlay is the geometry for two doors that meet on a single center partition, each covering about half of it. This hinge carries the half crank arm that positions each door correctly so the pair closes without the arms colliding. The 35mm cup bores into the back of the door, and the arm mounts to a Salice base plate on the cabinet, ordered separately. Because the mount is screw-on, the plate fastens with wood screws directly into the cabinet side or face-frame stile, making this a practical choice for any cabinet box regardless of whether pre-drilled system holes are present.
The self-open function is what sets this hinge apart from a standard self-close version. Rather than springing the door shut, it springs the door open when pressed, which is the mechanism handle-less fronts rely on. Pair it with a latch or magnetic catch to keep the door closed until pressed.
The hinge body is plated steel in a nickel finish, a neutral tone that works alongside satin nickel drawer pulls, edge pulls, and other visible hardware without competing for attention. Because the hinge is concealed when the door is closed, the finish matters most during installation and on any cabinet where the door stands open. The plated steel construction handles the mechanical demands of daily use across both residential and light commercial work.
This is the right pick for handle-less cabinet designs on either frameless or face-frame boxes, where two doors share a center partition and the project finish palette calls for nickel. Cabinet shops specifying push-to-open systems across a run of uppers or base cabinets will find the Series 200 a dependable volume choice. Homeowners and designers working on a renovation where hardware finish consistency matters across hinges, pulls, and knobs can rely on the nickel here to coordinate cleanly. For cabinets where a conventional handle is used and a spring pull close is wanted instead, the self-close version of this series is the better match.
No. The hinge clips to a Salice base plate that mounts to the cabinet, and the plate is sold separately. Salice plates are specific to the brand, so use a Salice plate sized and styled for your cabinet construction.
Self-open uses a spring to push the door outward when pressed, releasing a catch and opening the door without a handle. Self-close uses a spring to pull the door shut over the last few degrees of travel. These are opposite functions. This hinge is self-open, intended for handle-less fronts.
No. Screw-on mounting fastens the plate to the cabinet with wood screws, so it works on any cabinet regardless of whether 5mm system holes are present.
This hinge is sized for half overlay, where each door covers about half the cabinet side or partition. For a single door that covers the full cabinet side, a full overlay hinge with a straight arm is the correct choice.
Specify this hinge when the job calls for handle-less half overlay doors in nickel, on cabinets where a clean push-to-open result and a reliable screw-on mount matter more than tool-free plate installation.
Sold In: 1 Each
