Salice Series 200 165 degree hinge is a concealed cabinet hinge system designed for projects requiring a self-opening European hinge. This hinge belongs to the Salice Series 200 family, so it fits into an integrated system of hinges developed for concealed applications. The self-opening function uses pressure on the door to activate a release device, which then hands off to the hinge so the door opens completely, giving full access without pulling the door. That same release device holds the door in the closed position, so the door stays shut until pressure is applied again. The hinge is categorized as a concealed cabinet hinge, so it stays out of sight on the finished installation while providing the motion control. The hinge is part of the European standard hinge category, so it suits projects built around long arm concealed hinge layouts.
The hinge is available in a screw-on design that uses two #6 x 5/8 inch screws, so it fastens directly through the hinge cup or arm into the door or frame where specified. This screw-on approach supports straightforward installation with standard drilling and driving tools common in cabinet shops. The 11 mm cup depth means the boring operation removes less material than deeper cups, which is useful on thinner profiles that still fall within the hinge specification. The hinge cup edge drilling distance window of 3 mm to 9 mm means boring jigs can be set within that range while still maintaining the hinge design geometry. Series 200 hinges are designed to work with Salice mounting plates, so the hinge and plate combination forms a coordinated mounting solution.
These Salice thick door hinges handle doors up to a maximum thickness of 35 mm with special profiles, so they cover many thicker cabinet or specialty door constructions where standard hinges may be undersized. The 165 degree opening capability lets the door swing far past a typical 110 degree opening, which matters when interiors need to be accessed without the door obstructing hardware, bins, or shelves. The self-opening feature responds to pressure on the door by activating the release device, so hands stay on the work rather than on handles when opening doors in sequence. The release device then lets the hinge carry the door through to a complete open position, so the motion remains consistent from cabinet to cabinet. The hinge is finished in nickel, matching the typical appearance of many concealed hinge programs.
The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm operates through a hinge arm screw, so installers can fine-tune door gaps laterally while keeping the door square. This parallel movement helps maintain uniform reveals along the run, reducing the need to re-bore or relocate mounting plates. The hinge cup edge drilling distance from 3 mm to 9 mm keeps boring locations flexible, which is helpful when aligning with varied door edge details or matching existing shops standards. An 11 mm cup depth reduces the bore depth requirement, so fabricators can work with a wider range of door thicknesses while respecting the 35 mm maximum for thick door models. The hinge is part of a Series 200 system designed to work with Salice mounting plates, so once plates are set, multiple hinges can be installed or replaced while keeping the same mounting geometry. This system approach helps streamline both new installations and repeat work.
The Salice C2PSG99 is a concealed cabinet hinge in the Salice Series 200 line, so it mounts out of sight while providing the self-opening 165 degree door movement.
The hinge uses pressure to the door to activate a release device, which then allows the hinge to take over and open the door completely while also holding the door closed when at rest.
This Salice thick door hinge is designed for a maximum door thickness of 35 mm with special profiles, so it suits many thicker cabinet or specialty doors within that limit.
The hinge has an 11 mm cup depth and uses a hinge cup edge drilling distance between 3 mm and 9 mm, giving flexibility when setting boring jigs and layouts.
The hinge is available in a screw-on design using two #6 x 5/8 inch screws, so it fastens directly, and it is designed to work with Salice mounting plates.
This hinge offers patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via a hinge arm screw, helping align doors and maintain even reveals.
The Salice 200 Series self-opening half overlay hinge with 165 degree opening is designed for concealed cabinet applications that need wide access and push-to-open motion. Its 11 mm cup depth, 3 mm to 9 mm cup edge drilling distance, and side-to-side adjustment range support accurate boring and fine-tuning on site. The thick door rating up to 35 mm with special profiles allows this hinge to serve roles where heavier or deeper doors are part of the layout. For projects based on the Salice mounting plate system, this hinge fits into that established geometry and workflow, supporting consistent installations across multiple cabinets.
Sold In: 1 Each
