Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Salice catch surface mount no lip beige is a Salice America latch designed as a mechanical and magnetic push catch, so it provides positive door retention while working with push-to-open hardware on cabinets or similar casework. The surface mount design allows the catch body to sit on the cabinet surface instead of inside the panel, which helps when there is limited material thickness or when retrofitting existing installations. The no lip configuration keeps the catch housing flush without an overhanging edge, which reduces interference with adjacent components and simplifies alignment with the strike point. The beige color coordinates with light-colored interiors, which helps the hardware blend visually in standard cabinet environments. Identified by Salice DP29SNBR and classified under locks and latches as a latch, this catch fills the role of the primary push-to-open retaining point in a Salice push system.
This Salice mechanical and magnetic push catch uses a recessed 26mm diameter by 8mm deep catch detail, so the installer can base drilling operations on a clear, cabinet-grade boring dimension. By using a 26mm cutter to the specified depth, the catch body seats in a consistent pocket, which supports accurate face alignment with the door strike area. Because the catch is surface mount and no lip, it sits within its bored or surface footprint rather than overlapping an edge, giving flexibility when locating it relative to hinges and door overlay. The design is specifically intended to work with Salice Push Hinges, meaning the catch position can be coordinated with hinge placement so the push-to-open travel and closing action remain smooth.
The Salice DP29SNBR catch is categorized under locks and latches as a latch and is described as a surface mount, no lip, beige catch, so it fits naturally into cabinet and furniture applications where discreet push-to-open operation is required. Its beige finish suits light-toned interior cabinet spaces, which helps maintain a uniform look when the door is open. Because this catch is specifically designed to work in conjunction with Salice Push Hinges, it is suited to projects that already rely on those hinges for push-to-open movement. The recessed 26mm diameter by 8mm deep catch configuration aligns with common cabinet boring practices, allowing the catch to be integrated into standard panel constructions on casework, closets, or similar hinged enclosures that benefit from mechanical and magnetic push latching.
The combination of mechanical and magnetic push catch action in the DP29SNBR provides a defined closing point supported by magnetic attraction, which helps doors return to the same position after each cycle. This consistency matters on multi-door runs, where aligned reveals depend on each door seating against the same latch point. The surface mount no lip body allows the working face of the catch to present cleanly to the door without extra flanges, which can simplify setting the gap between door and cabinet. By using the specified recessed 26mm diameter by 8mm deep pocket, the installer can control how far the catch projects relative to the cabinet surface, directly affecting how the push hinges interact with the latch. Because the catch is specifically designed to work with Salice Push Hinges, the travel of the hinged door matches the engagement of the catch, supporting repeatable push-to-open and push-to-close performance across a run of cabinets.
The Salice DP29SNBR catch is a mechanical and magnetic push catch classified as a latch, so it holds cabinet doors closed while allowing push-to-open operation without using a pull handle.
The Salice catch is described as a surface mount, no lip design, so it seats on the cabinet surface within its footprint rather than wrapping over an edge or frame.
The DP29SNBR catch uses a recessed 26mm diameter by 8mm deep catch detail, so cabinet boring operations can be based on that diameter and depth for consistent installation.
This Salice catch is specifically designed to work in conjunction with Salice Push Hinges, so its stroke and position coordinate with hinge movement for push-to-open and close.
The beige finish matches the Salice description of a beige catch, so it blends with many light-colored cabinet interiors and keeps the latch less visually prominent when doors are open.
The magnetic function in this mechanical and magnetic push catch adds holding force at the closed position, which helps doors seat consistently against the latch point after each cycle.
The Salice catch surface mount no lip beige DP29SNBR offers a mechanical and magnetic push catch specifically designed to work with Salice Push Hinges, giving cabinet projects a coordinated push-to-open latch point. Its recessed 26mm diameter by 8mm deep catch detail provides a clear drilling guideline, supporting repeatable installations across multiple doors. For cabinet and furniture work that relies on Salice Push Hinges and benefits from a beige, surface mount no lip latch, this Salice America catch delivers the defined push-to-open engagement those systems are built around.
Sold In: 1 Each
