Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 200 concealed hinge opens to 165 degrees and is built for full overlay doors on face-frame and frameless cabinets. Its self-open motion and screw-on mount make it a dependable pick wherever a door needs to clear completely out of the way.
Most concealed hinges stop at 110 degrees, which serves everyday cabinet access well. But some installations demand that the door get fully out of the way: wall cabinets over a workspace where the open door would block reach-in, base cabinets at the end of a run where a 110 degree swing still clips a corner, and accessibility-conscious layouts where the door needs to fold back as far as possible. The 165 degree opening clears those situations. The self-open mechanism works with that wide arc rather than against it, holding the door open without the tendency to drift back that can appear at angles well past 90 degrees. The 35mm cup bores into the back of the door at standard depth, and the arm connects to a separately purchased base plate on the cabinet side.
The hinge body is steel with a nickel finish. Nickel reads as a warm neutral that coordinates cleanly with most mid-range cabinet hardware, from brushed pulls to standard hinges elsewhere in the run. The screw-on mount anchors directly into the cabinet with no reliance on pre-drilled 5mm system holes, which makes this a practical choice for retrofit work, face-frame cabinets with solid stiles, and any frameless box where system holes were not part of the original build. Height and side adjustment built into the arm let you dial the reveal after the plate is set, without pulling the door.
This hinge fits cabinet shops and contractors working on projects where wide clearance is the design requirement, not an afterthought. It suits face-frame builds where retrofitting a wider swing onto an existing box is the job, and frameless applications where appliance garages, corner runs, or accessible-design specs call for a door that opens nearly flat. For standard everyday doors where 110 degrees is enough, a Series 200 standard hinge covers that work at a closer price point. This one is the right call when the spec sheet says wide angle and the cabinet needs to stay clean and accessible.
No. The hinge body clips or screws to a base plate that mounts to the cabinet, and that plate is sold separately. Use a Salice plate matched to your cabinet type and the overlay position you need. Plates are not interchangeable across brands.
No. Self-open is a mechanism that keeps the door from falling back toward closed when it is swung wide. Soft-close is a separate damping system that slows a door over the last few degrees before it closes. This hinge does not have soft-close.
Not for the hinge itself, which is screw-on. Whether the base plate you choose requires system holes depends on which plate you order. A standard screw-on Salice plate works without pre-drilled holes.
Yes. This hinge works on both cabinet types. The plate you pair it with should match the construction of your specific cabinet.
When the layout demands a door that clears completely and stays there, this wide-angle nickel hinge delivers the opening, the hold, and the finish to match the rest of the hardware on the job.
Sold In: 1 Each
