Würth #5 x 7.5mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610575 961 1000 - 1000/Box

Short Shank, Precise Fit: A 7.5 mm Euro Screw for Shallow Panel Applications

The Würth #5 x 7.5 mm Flat Head Euro Screw is a compact fastener built for mounting European cup hinges, drawer slides, and cabinet hardware in 32 mm system line-bored panels. At 7.5 mm in length, it is sized for hardware plates that land in thin stock or where deeper penetration would break through the panel face — situations the longer screws in this family cannot serve without risk.

Key Features

• 7.5 mm length keeps the fastener within the panel in thin cabinet sides and shallow hardware installations.
• Flat head with 7.2 mm head diameter seats cleanly in the countersink of European hinge and drawer slide mounting plates.
• #2 Pozidriv drive transfers torque without cam-out during hardware installation.
• Coarse thread grips the fiber matrix of particleboard, MDF, and melamine-faced panels typical in cabinet construction.
• Blunt point is designed for pre-bored 5 mm line-bore holes and will not self-start in undrilled material.
• Nickel finish blends with the chrome and nickel hardware finishes common on European hinges and slides.

Where a 7.5 mm Euro Screw Does Its Job

Euro screws install into the 5 mm diameter holes of a 32 mm system line-bored cabinet, anchoring hinge mounting plates and drawer slide brackets to the cabinet side or interior face. The 7.5 mm length is the right call when panel thickness is limited, when a hardware plate sits on a shelf dado, or when a secondary panel behind the bore field narrows the available depth. In a standard 18 mm particleboard cabinet side, a longer screw can still be driven without issue, but in 15 mm panels, veneered plywood, or composite sides where penetration depth is critical, the 7.5 mm shank eliminates the guesswork. This length is also common for securing Blum hinge mounting plates, where the manufacturer's pre-bored hole pattern is designed around this fastener range.

Flat Head, Pozidriv Drive, and Nickel Finish

The flat head countersinks into the mounting plate recess so the hardware lies flat against the panel face without rocking. A 7.2 mm head diameter matches the countersink geometry of standard European hinge and drawer slide plates, which are engineered to accept this head size rather than a larger wood screw head. The #2 Pozidriv drive uses parallel flank geometry that resists the cam-out force common to Phillips drivers under torque, a practical advantage when installing rows of hinges with a power driver. The nickel finish ties visually to the bright hardware finishes on Blum and similar European cabinet fittings without requiring a painted or coated head.

Right for Cabinet Installers and Shop Production

A box of 1000 covers the full hardware layout on a cabinet run without interruption. Cabinet shops installing 32 mm system hinges and slides in volume benefit from a consistent, hardware-matched screw that does not require sorting or substitution at the bench. Installers working with Blum components in thin-panel frameless cabinetry will find the 7.5 mm length addresses the depth constraint that comes up most often in contemporary flat-front kitchens and bath vanities built from 15 mm and 18 mm panels.

Common Questions

The Compact Euro Screw That Fits Where Longer Screws Cannot

When panel depth is the constraint and hardware alignment cannot be compromised, the Würth 7.5 mm Euro Screw delivers a clean, plate-flush installation in thin and standard cabinet panels alike — 1000 per box, ready for production.