Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #5 x 14.5mm Flat Head Euro Screw is a coarse-thread, blunt-point fastener designed to mount European cup hinges, drawer slides, and other 32mm system hardware into cabinet panels where a longer reach is needed. The 7.2mm flat head seats cleanly in standard hardware mounting plates, and the Nickel finish blends with cabinet interiors and the hardware itself.
Most euro screw installations call for a shorter length when panels are a standard 16mm or 18mm thick and the hardware plate sits flush. The 14.5mm length steps in when conditions demand more thread depth: mounting hinges through a thick face-frame overlay, driving into a panel with an applied laminate that raises the surface, or securing hardware to a cabinet side that has been doubled up for reinforcement. The extra length puts more thread in contact with the panel without risking breakthrough on panels that fall within the typical range for frameless and face-frame cabinetry alike. This screw is also listed as compatible with Blum mounting hardware, making it a reliable match when you are working through Blum's hinge and slide ecosystem.
The Nickel finish on this screw does more than look tidy inside a finished cabinet. It coordinates with the plated mounting hardware you are driving it into, so heads that catch the light inside an open cabinet door do not stand out as a mismatched detail. For corrosion resistance in dry indoor cabinet environments, the Nickel finish provides adequate protection for the lifetime of the installation. On the drive side, the #2 Pozidriv recess has a meaningful advantage over Phillips in production work: the parallel flanks do not generate the axial cam-out force that Phillips geometry does, which means less head stripping when you are running a cordless driver at speed through a box of a thousand screws.
Cabinet shops running European frameless construction or face-frame cabinets with thick overlays will find the 14.5mm length handles the situations where a shorter euro screw leaves the joint feeling soft. Installers setting Blum hinges and soft-close slides in the field benefit from a screw that is spec-matched to the hardware rather than pulled from a general-purpose bin. The 1000-piece box fits the rhythm of production work, whether that means loading a driver and running a full kitchen worth of hinge plates or restocking a job-site parts kit that gets drawn down over a multi-day install.
A standard euro screw is sized to give adequate thread engagement in a specific panel thickness without punching through the back face. When the effective driving depth increases, because of a laminate surface, a face-frame layer, or a doubled panel, a longer screw maintains the same thread engagement depth in the base material. The 14.5mm length covers those situations while staying well within safe limits for standard cabinet panels.
Yes. This screw is listed as compatible with Blum hardware. The 7.2mm flat head is sized to seat in Blum mounting plate countersinks, and the coarse thread engages the pre-bored panel holes that Blum's 32mm system specifies.
A Phillips bit will physically fit a Pozidriv recess, but the tapered Phillips flanks slip in the parallel Pozidriv geometry and will strip the head under torque. Use a #2 Pozidriv bit for clean engagement and to avoid head damage during installation.
Euro screws install into pre-bored 5mm line-bore holes, not into undrilled material. A blunt point centers correctly in a pre-bored hole and begins thread engagement without the wandering or tearing that a sharp self-starting point can cause when it contacts a clean hole edge.
This screw is finished in Nickel and designed for dry indoor cabinet installations. It is not rated for exterior use or environments with sustained high moisture exposure.
When the installation calls for more thread depth than a shorter euro screw delivers, the Würth 14.5mm Flat Head Euro Screw keeps the hardware seated correctly, the head flush, and the job moving without a trip to find a different fastener.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW59920 Mfr# 027610575 961 1000 | Würth #5 x 7.5mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610575 961 1000 - 1000/Box | ||||
Sold in: 10 Each |  WW614176652 Mfr# 0614176652090 10 | #2 x 1" Pozidriv Insert Bit (10/Box) | ||||
Sold in: 1000 Each | WW60000 Mfr# 027610510 961 1000 | Würth #5 x 10mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610510 961 1000 - 1000/Box | ||||
Sold in: 1000 Each | WW60100 Mfr# 0276105115961 1000 | Würth #5 x 11.5mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 0276105115961 1000 - 1000/Box | ||||
Sold in: 1000 Each | WW60200 Mfr# 027610513 961 1000 | Würth #5 x 13mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610513 961 1000 - 1000/Box | ||||
Sold in: 1000 Each |  WW60520 Mfr# 027610525 961 1000 | Würth #5 x 25mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610525 961 1000 - 1000/Box |