Würth #5 x 13mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610513 961 1000 - 1000/Box

Nickel Euro Screw For Blum Hardware and 32mm Cabinet Systems

The Würth #5 x 13mm Flat Head Euro Screw is a coarse-thread cabinet fastener designed to mount European cup hinges, drawer slides, and shelf hardware into the 5mm line-bore holes of 32mm system cabinetry. At 13mm in length, it seats hinge plates and slide brackets cleanly against cabinet panels without over-penetrating standard 3/4-inch (19mm) stock. The Nickel finish is specified for use with Blum hardware.

Key Features

• 13mm length sized to mount hardware plates against 3/4-inch cabinet panels without breaking through the back face.
• Flat head with a 7.2mm head diameter seats flush against hardware mounting plates for a clean, tight fit.
• #2 Pozidriv drive delivers positive bit engagement and resists cam-out during installation.
• Coarse thread on a #5 gauge shank grips the engineered wood fiber matrix of particleboard, MDF, and plywood cabinet panels.
• Nickel finish coordinates with Blum hardware and keeps fastener heads visually consistent inside the cabinet.
• Blunt point designed for pre-bored 5mm line-bore holes, preventing damage to the surrounding panel material.

Where the 13mm Length Fits the Job

Euro screws are not interchangeable across lengths without checking panel thickness and hardware plate depth. At 13mm, this screw is well matched to the standard 3/4-inch (19mm) cabinet panel: the threaded section engages enough material to hold the hardware plate firmly, while the length stops short of the panel's back face. This makes it a practical choice when mounting Blum cup hinge plates, drawer slide clips, and shelf hardware brackets directly to the interior panel face in frameless or face-frame cabinetry built to 32mm system dimensions. Shops running production cabinet lines with 3/4-inch box material will find this length covers the majority of standard hardware mounting positions without requiring a length swap.

Pozidriv Drive and Nickel Finish

The #2 Pozidriv recess uses parallel flanks rather than the tapered geometry of a Phillips drive, which means the bit stays seated under torque instead of riding up and out of the recess. For hardware installation work where the same motion is repeated dozens of times across a cabinet run, that resistance to cam-out reduces stripped heads and keeps the installation moving. The Nickel finish serves a practical as well as visual purpose: it matches the plating on Blum hinge plates and slide hardware so fastener heads do not contrast with the hardware inside a finished cabinet interior.

Who Uses This Screw

Cabinet shops building frameless or face-frame boxes to 32mm system specifications are the primary users. The screw is equally useful for shop installers doing kitchen and bath installs who need a reliable stock of hardware-specific fasteners. Designers and contractors specifying Blum hinges and slides for residential or commercial projects will want to match this screw to the hardware to maintain finish consistency. The 1000-piece box suits production volume without requiring frequent reorders on a fastener that gets consumed quickly during a cabinet run.

Common Questions

The Right Fastener Keeps Hardware Mounted Right

Matching screw length, gauge, and finish to the hardware and panel in use is what separates a clean install from one that needs to be redone. This 13mm Nickel euro screw is built for exactly that match in standard 32mm system cabinetry with Blum hardware.