Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #5 x 20mm flat head euro screw is sized for cabinet hardware installations where a longer reach into the panel is needed. With a Pozidriv drive, euro thread, blunt point, and a 7.5mm nickel flat head, it is built for line-bored cabinetry and fits Grass hardware mounting plates.
Most euro screw lengths in this family are sized for standard panel thicknesses and flush hardware mounts. The 20mm version is the longest in the group, and that extra reach matters in specific situations: thicker cabinet side panels, hardware mounting plates with greater standoff, or installations where the screw must pass through an intermediate component before threading into the panel. If the hardware spec sheet calls out a longer screw or if shorter screws are backing out under load, this is the length to reach for. It also suits shops that standardize on a single longer screw across varying panel thicknesses to simplify bin management.
The euro thread is calibrated for the 5mm line-bore holes used throughout European-style cabinetry systems. The blunt point means the screw relies entirely on that pre-bored hole to locate and start — it will not self-tap into unprepared material, which keeps the screw tracking true and prevents panel damage when driving into finished interiors. The nickel finish coordinates with hardware in nickel and chrome families and holds up well in the dry indoor environment of a finished cabinet.
This screw is at home in any shop running European frameless cabinetry on a 32mm system. The geometry matches standard line-bore hole spacing and the head seats into the countersunk holes on European hinge mounting plates, drawer slide hardware, and shelf pin components. The explicit Grass compatibility noted in the product attributes makes it a direct fit for Grass hinge and drawer system installations without trial-and-error sizing. Cabinet shops doing volume Grass hardware installs can pull from this box with confidence that the screw will seat correctly every time.
Euro screws are designed for pre-bored holes in 32mm line-bore cabinetry systems. The blunt point threads into the existing hole cleanly without self-starting, which prevents the tip from wandering or damaging the panel face during installation.
No. A Pozidriv bit has four additional contact ribs between the main cross arms, giving it a parallel-flank engagement that resists cam-out. A Phillips bit will physically fit but will slip under torque and risk stripping the head. Use a #2 Pozidriv bit for best results.
The 20mm length offers deeper thread engagement than the 10mm, 11.5mm, 13mm, and 14.5mm versions. It suits thicker panels, hardware with added standoff, or shops that prefer a single longer screw across a range of panel thicknesses.
Yes. The #5 euro thread and 7.5mm flat head are standard in European cabinetry hardware. While the product attributes confirm Grass compatibility, this screw fits any European hinge plate, drawer slide, or shelf hardware using standard 5mm line-bore holes with a countersunk mounting hole sized for a 7.5mm head.
Each box contains 800 screws.
When the job calls for the deepest engagement in the euro screw family, this 20mm Pozidriv flat head in nickel keeps the installation clean, the hardware seated flush, and the line moving.
Sold In: 8000 Each