Würth #5 x 25mm Flat Head Euro Screw Pozidriv Drive - Blunt Point Coarse Thread Nickel, 027610525 961 1000 - 1000/Box

A 25mm Euro Screw Sized for Deeper Panel Engagement

The Würth #5 x 25mm Flat Head Euro Screw is a coarse-thread, blunt-point fastener for mounting European cup hinges, drawer slides, and cabinet hardware in 32mm system cabinetry. At 25mm, it offers more thread engagement than the shorter screws in this family, making it a practical choice when extra holding depth suits the panel or hardware at hand.

Key Features

• 25mm length provides deeper thread engagement in cabinet side panels compared to shorter euro screw variants.
• Flat head with 7.2mm diameter seats flush inside standard European hinge and slide mounting plates.
• #2 Pozidriv drive delivers cam-out-resistant engagement under power-tool torque for consistent, clean seating.
• Coarse thread on a #5 shank grips the fiber structure of particleboard, MDF, and plywood panels reliably.
• Nickel finish blends with the metal hardware it secures and resists light corrosion in interior environments.
• Compatible with Blum hardware and other European system components that use standard 5mm line-bore hole spacing.

Where the 25mm Length Fits in Cabinet Work

Most euro screws in a shop's rotation run between 10mm and 20mm, sized to mount hardware plates without penetrating through a panel face. The 25mm length reaches deeper into the panel substrate, which can be useful when seating hardware in thicker engineered panels, when the installation calls for a longer thread column, or when a hardware manufacturer specifies this length for a particular fitting. It is also a practical spare to keep on hand for the occasional job where a shorter screw strips out and a fresh bite deeper in the panel material saves the installation. The blunt point, standard on euro screws, requires the pre-bored 5mm line-bore hole that 32mm system cabinets already carry, so no additional layout work is needed.

Materials, Finish, and Compatibility

The screw body is steel with a Nickel finish. The finish gives the visible head a neutral appearance that sits quietly against the chrome and zinc hardware faces common in European cabinetry interiors. Nickel-finished steel euro screws are suited to dry, climate-controlled interior environments. The 7.2mm flat head is sized to seat in the countersunk holes on standard European hinge mounting plates and drawer slide brackets. The product attribute data lists Blum as a compatible hardware brand, and the 5mm shank diameter aligns with the 32mm system line-bore standard used across most European hardware lines. Verify the head recess depth on any hardware not in the standard European system before using this screw.

Who Uses This Screw and When

Cabinet shops running European frameless construction and face-frame shops installing European concealed hinges both reach for euro screws daily. The 25mm version suits installers who prefer a longer fastener for panel security, production environments that stock a single longer length for varied panel thicknesses, and service calls where a stripped short screw needs to be replaced with one that reaches fresh material. At 1000 screws per box, the quantity supports shop-floor use without frequent reorder interruptions. A #2 Pozidriv bit is the correct driver for this screw.

Frequently Asked Questions

The Right Euro Screw for Deeper Panel Work

When 25mm of thread engagement is what the job calls for, this Würth flat head euro screw keeps European hardware installations tight, the Pozidriv head seated cleanly, and 1000 screws ready in the box for a full day of cabinet work.