Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #5 x 10mm flat head euro screw is sized for mounting European cup hinges, drawer slides, and cabinet hardware into the 5mm line-bore holes of 32mm system cabinetry. At 10mm in length, it is the right choice for standard 3/4-inch (19mm) cabinet panels where a longer screw would risk breaking through the back face.
The 10mm length is purpose-sized for 3/4-inch (19mm) cabinet box panels. When a hinge cup is bored at 13mm depth and the mounting plate sits on the panel face, the 10mm screw threads into the remaining panel material without punching through to the interior surface. That matters in frameless cabinetry where the panel face is visible and a protruding tip would force a repair. For thinner panels or components where even less penetration depth is available, the shorter screws in this family are the right call. For thicker material or deeper engagement, longer lengths are available.
Euro thread geometry is calibrated for the fiber density of particleboard and MDF, the substrates most common in 32mm system cabinets. The thread engages quickly in a line-bored hole and pulls the hinge plate or slide bracket tight against the panel face without stripping the hole. The #2 Pozidriv recess has parallel flanks rather than the tapered geometry of a Phillips drive, so the bit stays seated under torque instead of riding out of the recess. In a shop driving hundreds of hinge screws per shift, that difference reduces stripped heads and wasted hardware. The blunt point is standard for euro screws: it is designed to enter a pre-bored hole cleanly rather than self-start in undrilled material.
The nickel finish is a practical match for the hardware it installs. Blum hinges, slides, and mounting plates are typically chrome or nickel-tone, so a nickel screw head that sits in the countersink of a mounting plate disappears visually. Würth lists this screw as compatible with Blum hardware, making it a reliable choice for shops that build to Blum specifications and want a screw that is confirmed to seat correctly in Blum mounting plates without modification.
Yes. The 10mm length is sized for 3/4-inch (19mm) panels and is the shortest length in this family. It provides solid thread engagement without risking penetration through the back face of a standard panel.
A Phillips bit will physically enter the recess but is not the correct fit. Pozidriv has a different flank geometry, and a Phillips bit will slip under torque and risk stripping the head. Use a #2 Pozidriv bit for reliable driving.
Yes. Euro screws are designed for installation into pre-bored 5mm line-bore holes. The blunt point is not intended to self-start in undrilled material.
Yes. This screw is listed as compatible with Blum. The 7.2mm flat head is sized to seat in Blum hinge plate and slide bracket countersinks without modification.
Euro thread is calibrated for the pre-bored line-bore hole and the fiber structure of particleboard and MDF. It provides consistent engagement in those materials without over-cutting the hole or requiring excess driving torque.
When the job is mounting Blum hinges or slides into standard 3/4-inch cabinet panels, this 10mm Würth euro screw provides a confirmed fit in the hardware, the right depth for the material, and a Pozidriv drive that holds up through a full production run.
Sold In: 15000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176652 Mfr# 0614176652090 10 | #2 x 1" Pozidriv Insert Bit (10/Box) |