Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Blackrock appliance pull uses hard geometric lines and simple shapes to create a strong, modern look on appliance panels and large doors. The pull belongs to the Blackrock collection, so it matches other pieces built on the same design language. Its oil-rubbed bronze finish presents a dark tone with warm character, helping it coordinate with many wood species and appliance finishes on a job.
The pull measures 9-3/8 inches (238 mm) in overall length with an 8 inch (203 mm) center-to-center dimension, so it spans wider appliance panels cleanly while lining up with standard 8 inch boring. A projection of 1-11/16 inches (43 mm) gives hand clearance in front of appliance doors, which supports a solid, full-hand grip when moving heavier panels.
The zinc die-cast material provides a consistent, precise shape for the straight bar and squared posts, helping the pull sit cleanly against the surface. A width of 3/4 inch (19 mm) keeps the profile substantial without feeling bulky in hand.
This Amerock Blackrock appliance pull uses an 8 inch (203 mm) center-to-center mounting dimension, so hole layouts can follow a straightforward linear pattern across appliance panels and tall doors. The base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm) define the footprint at each mounting point, giving clear coverage expectations over the drilled holes.
The 1-11/16 inch (43 mm) projection works with the 3/4 inch (19 mm) bar width to set the hand away from the panel while still keeping the pull close enough for a tight, built-in appearance. Zinc die-cast construction keeps these dimensions consistent from piece to piece, supporting repetitive, accurate alignment on multi-unit projects.
This Amerock Blackrock Series oil-rubbed bronze pull is part of an appliance pull product class, so it suits appliance panels and large cabinet doors needing a substantial handle. The 9-3/8 inch (238 mm) overall length helps it sit proportionally on tall pantry doors or integrated refrigerator fronts where a shorter pull could look undersized.
The 8 inch (203 mm) center-to-center measurement aligns with appliance-handle drilling templates that follow that spread, supporting consistent placement across multiple fronts in the same run. With a base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm), each post covers the bored area cleanly, which supports a finished look on stained or painted surfaces.
The oil-rubbed bronze finish pairs with traditional and transitional cabinet styles, giving a dark accent against lighter door finishes or matching deeper wood tones. Because the pull is part of the Blackrock collection, its hard geometric styling can carry across the kitchen when paired with other Blackrock handles and pulls on nearby doors and drawers.
The zinc die-cast material of this Amerock Blackrock appliance pull allows the manufacturer to hold the 3/4 inch (19 mm) bar width and crisp edges, which helps installers achieve a clean, squared alignment line when multiple pulls run on tall cabinets. That consistency supports visual continuity, especially on projects using several appliance panels side by side.
The 1-11/16 inch (43 mm) projection works together with the bar width to create space for fingers behind the pull, giving users a full-hand grip that is useful on heavier doors. The base dimensions - 15/16 inch (24 mm) long and 3/4 inch (19 mm) wide - give a defined mounting footprint, helping the pull seat firmly against flat door faces.
The defined overall length of 9-3/8 inches (238 mm) allows installers to center the pull accurately on wide fronts by referencing that measurement against panel width. At the same time, the 8 inch (203 mm) center-to-center spacing keeps drilling straightforward when using jigs or templates built around that common spread.
The Amerock BP55279ORB pull has an overall length of 9-3/8 inches (238 mm), an 8 inch (203 mm) center-to-center, a projection of 1-11/16 inches (43 mm), and a width of 3/4 inch (19 mm), guiding boring and layout.
The 8 inch (203 mm) center-to-center spacing matches a common boring pattern, allowing jigs and templates built for 8 inch pulls to be used for accurate, repeatable hole drilling.
The Amerock Blackrock appliance pull has base dimensions of 15/16 inch (24 mm) length and 3/4 inch (19 mm) width, which defines the area each post covers on the door surface.
The pull is made from zinc die-cast material, which allows consistent shaping of the bar and posts so mounted pulls align cleanly across multiple cabinet or appliance fronts.
The 1-11/16 inch (43 mm) projection sets the pull out from the surface, creating space for a full-hand grip that helps when opening heavier appliance panels or tall doors.
This Amerock Blackrock Series pull has an oil-rubbed bronze finish, providing a dark, warm-toned appearance that supports traditional or transitional kitchen and appliance designs.
The Amerock Blackrock appliance pull BP55279ORB combines an 8 inch (203 mm) center-to-center layout, a 9-3/8 inch (238 mm) overall length, and a 1-11/16 inch (43 mm) projection to meet appliance and large-door demands. Its oil-rubbed bronze finish and 3/4 inch (19 mm) width fit projects calling for a substantial, geometric handle. For work that uses 8 inch boring and needs a coordinated Blackrock look across cabinets and appliances, this pull delivers the key dimensions and style in one part number.
Sold In: 1 Each
