
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Revitalize appliance pull gives you an 18 inch center-to-center grip for handling tall appliance panels and wider doors with a single solid pull, which helps keep heavy fronts controllable on day-to-day openings. The pull is built from zinc die-cast, so the handle body maintains a consistent form while you fasten it down through thicker doors or appliance panels. An oil-rubbed bronze finish brings a dark, traditional look that ties in with other bronze hardware runs across a kitchen or built-in bank. Overall length is 18-7/8 inches, providing a little extra bar beyond the mounting holes, which offers more hand contact area at the ends. A 2-1/4 inch projection stands the grip off the front enough for a full hand wrap, which matters on deeper appliance fronts. Width is 1-3/16 inches, giving a substantial face for alignment against wider stiles or overlay edges.
The 18 inch center-to-center measurement defines hole layout for this pull, giving you a fixed spread when drilling through appliance panels or tall cabinet doors. With 18-7/8 inches of total length, the ends of the pull extend slightly beyond the fastener positions, which helps you visually center the bar on wider faces. A 2-1/4 inch projection sets the standoff from the surface, which influences how the pull clears door profiles and how fingers engage from the side. At 1-3/16 inches wide, the bar covers a modest strip of material, which can align cleanly along thicker stiles or across appliance panel trim without overpowering the face.
This Amerock Revitalize Series oil rubbed bronze 18 inch center-to-center appliance pull works wherever a long handle run is needed on a vertical surface. The 18 inch center spacing suits tall cabinet doors, integrated appliance fronts, or wide pantry faces that benefit from a two-handed grip area. Oil-rubbed bronze finish lets this BP55350ORB pull visually track with other bronze pulls or knobs in the same Revitalize collection, so tall fronts can match surrounding cabinet hardware. The 18-7/8 inch length provides coverage that looks proportionate on larger door panels, which helps keep big faces from looking under-scaled by a short handle. With a 2-1/4 inch projection, the pull stands far enough off the face to stay comfortable on deeper appliance panels, while still sitting close enough to stay within normal cabinet hardware lines.
The fixed 18 inch center-to-center layout on the BP55350ORB appliance pull gives installers a precise drilling pattern, which supports repeatable hole placement across multiple tall doors in a run. A 1-3/16 inch width places a defined bar across the stile, which can help align the pull parallel to edges or trim details during layout. The zinc die-cast material keeps the handle body stable under fastening load, so the pull seats evenly when tightened from the back side of doors. The 2-1/4 inch projection establishes predictable clearance for fingers behind the bar, which maintains similar hand feel on both cabinet and appliance fronts using the same pull. Oil-rubbed bronze finish keeps the visual tone consistent wherever this model is used, which simplifies hardware planning when combining appliance pulls, standard pulls, and coordinating Revitalize pieces in one project.
The Amerock BP55350ORB pull has an 18 inch center-to-center dimension, which sets the distance between mounting holes when laying out tall doors or appliance fronts.
The Amerock Revitalize Series appliance pull measures 18-7/8 inches overall length, giving extra bar beyond the hole spread for hand contact and visual balance on larger panels.
This oil rubbed bronze appliance pull has a 2-1/4 inch projection, which sets the stand-off from the door face to create working hand clearance.
The Revitalize series cabinet appliance pull is 1-3/16 inches wide, which offers a substantial mounting footprint suited to taller doors and appliance panels.
The Amerock BP55350ORB appliance pull is made from zinc die-cast, providing a solid, uniform handle body once fastened to the door or drawer front.
This Amerock Revitalize appliance pull uses an oil-rubbed bronze finish, giving it a dark, traditional appearance that coordinates with other bronze cabinet hardware.
The Amerock Revitalize Series BP55350ORB appliance pull combines an 18 inch center-to-center layout, 18-7/8 inch overall length, and 2-1/4 inch projection to handle larger door and appliance fronts with a consistent grip. Zinc die-cast construction and a 1-3/16 inch width provide a solid bar that sits cleanly on tall faces. The oil-rubbed bronze finish ties this pull into other bronze decorative hardware, supporting a unified look across cabinets and integrated appliances. For projects calling for a long, coordinated appliance handle with defined dimensions, this model delivers a clear, repeatable spec.
Sold In: 1 Each