Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Revitalize 3 in pull is a zinc die-cast cabinet handle from the Revitalize collection in a gilded bronze finish. The 3 in (76 mm) center-to-center mounting dimension positions screw holes on a standard cabinet layout, which streamlines drilling and repeat installations across multiple doors and drawers. The 3-11/16 in (94 mm) overall length gives extra grip area beyond the hole spacing, which helps when pulling wider or heavier drawers. The 1-3/8 in (35 mm) projection stands the pull off the fascia, creating finger clearance that matters on thicker door edges or when working with larger hands. A 9/16 in (14 mm) width presents a slim profile, which keeps the look light on smaller fronts while still reading as a defined handle line on full-size faces.
The 3 in (76 mm) center-to-center dimension on this Amerock BP55343GB cabinet pull sets a consistent hole spread, which simplifies measuring and jig setup when repeating the pattern across a full bank of doors or drawers. The 9/16 in (14 mm) base length and width define a small contact area at each end, which helps the pull land neatly on slender stiles or rails without overhanging panel details. With a 1-3/8 in (35 mm) projection, the pull extends far enough off the cabinet face to give clearance, which supports smoother operation when users approach the handle from different angles.
This Amerock Revitalize collection pull is a decorative handle for cabinets and similar casework, which makes it suitable anywhere a 3 in (76 mm) center-to-center pattern is specified. The gilded bronze finish places it in warm-tone schemes, which suits cabinets coordinated with bronze or brass-colored fixtures. Its 3-11/16 in (94 mm) overall length keeps the handle proportional on standard cabinet fronts, which avoids overpowering narrow drawer faces while still reading clearly on larger doors. The 9/16 in (14 mm) base footprint sits compactly on face frames or slab fronts, which is helpful when working around panel reveals or existing routed edges.
The defined 3 in (76 mm) center-to-center spacing and 3-11/16 in (94 mm) length work together as fixed layout numbers, which allow installers to repeat hole locations accurately along long cabinet runs. The 1-3/8 in (35 mm) projection and 9/16 in (14 mm) width set the handle away from the fascia in a controlled way, which keeps visual lines consistent when multiple Amerock Revitalize collection pulls are mounted in a row. The zinc die-cast construction delivers a uniform body, which helps each pull sit square against the surface once tightened. With the Amerock Corporation BP55343GB part number, the handle can be matched across future phases of a project, which supports continuity when adding cabinets or replacing individual fronts.
The Amerock Revitalize 3 in pull has a 3 in (76 mm) center-to-center dimension, which sets the hole spacing for drilling jigs and aligns with common cabinet hardware layouts.
The Amerock BP55343GB cabinet pull measures 3-11/16 in (94 mm) overall length, which provides extra grip beyond the 3 in mounting spread on doors and drawers.
This Revitalize 3 in gilded bronze pull projects 1-3/8 in (35 mm) from the cabinet surface, which creates working finger clearance in everyday use.
The Amerock Revitalize collection pull is zinc die-cast, which forms a solid handle body for repeated operation on cabinet doors and drawers.
This 3 in center to center cabinet pull has a gilded bronze finish, which pairs with bronze-toned hinges, faucets, and other decorative hardware.
The Amerock Revitalize 3 in pull has a 9/16 in (14 mm) base length and width, which creates a compact footprint on face frames and slab fronts.
The Amerock Revitalize Series 3 in (76 mm) center-to-center gilded bronze pull BP55343GB combines defined mounting dimensions with a warm metallic finish, which suits cabinet hardware layouts built around standard 3 in spacing. Wurth Baer Supply offers this zinc die-cast handle for installers and woodworkers who need a consistent Amerock Revitalize collection pull across new cabinetry, drawer banks, or replacement fronts. Matching the 3 in center-to-center size, 3-11/16 in length, and gilded bronze finish on each unit keeps lines and color continuous from one cabinet section to the next.
Sold In: 1 Each
