Amerock Revitalize Series Gilded Bronze 8" (203 mm) Center to Center Appliance Pull, -BP55348GB

Amerock Revitalize Appliance Pull 8 Inch For Cabinets

Amerock Revitalize appliance pull 8 inch gives cabinet installers a defined 8 inch center-to-center mounting layout, which sets consistent handle spacing on appliance panels or large cabinet doors. The 8-13/16 inch overall length creates a generous gripping area, which helps when operating heavier doors on built-in appliances or tall pantry fronts. A 2-1/8 inch projection stands the pull off the face of the door, which provides finger clearance in everyday use. The 1-1/8 inch width establishes a solid hand contact surface, which supports a firm grip when pulling heavier fronts. Zinc die-cast construction forms the body of the pull, which delivers a rigid, uniform component for precise alignment across multiple doors. The gilded bronze finish defines the visual look, which lets the pull coordinate with warm-toned hinges or other bronze-finished decorative hardware on the same installation.

Key Revitalize Pull Details That Help The Job

• The 8 inch center-to-center drilling dimension fixes the hole pattern, which simplifies layout on appliance panels or cabinet doors that need repeatable handle spacing.
• The 8-13/16 inch overall length spans more of the door face, which helps visually balance wider appliance fronts or tall cabinet doors in a run of casework.
• The 2-1/8 inch projection sets the standoff from the door surface, which provides working clearance for fingers when gripping the pull on thicker appliance or cabinet fronts.
• The 1-1/8 inch width defines the front profile of the pull, which creates a broader contact surface for the hand when opening heavier doors.
• The zinc die-cast material forms the pull body, which produces a consistent shape that supports accurate alignment with adjacent pulls on a bank of doors.
• The gilded bronze finish controls the color and sheen, which allows the pull to match other gilded bronze decorative hardware across the same project.

Mounting And Fit Details For This Appliance Pull

The 8 inch center-to-center dimension sets fixed hole spacing for this Amerock Revitalize appliance pull, which aligns with standard appliance-style layouts on many overlay cabinet doors. The 2-1/8 inch projection positions the grip away from the door surface, which supports comfortable hand clearance without crowding the panel face. An 8-13/16 inch overall length defines the coverage area on the door, which helps plan handle placement relative to panel edges and rails. The 1-1/8 inch width shapes the pull profile against the door, which influences both the look and the amount of hand contact during operation.

Using The Revitalize Gilded Bronze Pull On Projects

Where This Gilded Bronze Appliance Pull Fits Best

The Amerock Revitalize Series Gilded Bronze 8 inch center-to-center appliance pull works on cabinet or appliance fronts laid out for an 8 inch mounting pattern, which supports use on larger doors that benefit from a longer handle. The 8-13/16 inch total length stretches across more of the panel face, which suits wider drawer fronts or tall doors that need a substantial pull point. Zinc die-cast construction gives the pull a solid, uniform body, which integrates cleanly into decorative hardware programs based on metal pulls. The gilded bronze finish presents a warm metallic tone, which fits projects built around bronze-colored hinges or other gilded bronze decorative hardware. The 1-1/8 inch width and 2-1/8 inch projection together set the hand contact geometry, which makes the pull suitable for locations where a full-hand grip is useful, such as appliance-style cabinet doors or heavy pantry fronts.

Why These Amerock BP55348GB Details Support Consistent Results

The 8 inch center-to-center measurement on the Amerock BP55348GB appliance pull standardizes drilling from door to door, which reduces layout variation when multiple pulls are installed across a kitchen or casework run. The defined 8-13/16 inch overall length gives a fixed reference for aligning the pull relative to door edges and stiles, which aids in setting consistent reveal lines visually. The 2-1/8 inch projection keeps the grip portion of the pull at a known distance from the door face, which helps maintain uniform clearance when doors are adjacent or near walls. The 1-1/8 inch width stabilizes the pull footprint on the surface, which supports a repeatable look when matching pulls on drawers, appliance panels, and tall doors. The zinc die-cast material creates precise shapes and edges, which supports tight visual alignment between multiple Amerock Revitalize appliance pulls specified on the same project.

Common Questions About The Revitalize Appliance Pull

Select This Pull For 8 Inch Appliance Layouts

The Amerock Revitalize Series Gilded Bronze 8 inch center-to-center appliance pull combines a defined 8 inch mounting pattern, 8-13/16 inch length, 2-1/8 inch projection, and 1-1/8 inch width, which suits appliance-style cabinet fronts needing a substantial zinc die-cast pull in a gilded bronze finish.