Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Classic Series knob describes a round cabinet knob from the Pro Value Series that suits builders and installers needing a straightforward, repeatable choice for door and drawer fronts. The Classic Series designation ties this knob to a traditional profile, which helps match it visually to other Classic Series pieces on a project for a unified look. Its weathered nickel finish gives cabinets a muted metallic tone, which works well in designs where a bright, reflective surface would distract from doors and drawer faces. The knob uses zinc die cast construction, which provides a solid-feeling grip when opening and closing doors in daily use. A stated length or diameter of 1 inch defines its footprint on the cabinet face, so it remains compact while still giving enough surface for a comfortable pull. A projection of 3/4 inch sets how far the knob stands off the door, allowing fingers to wrap behind it while keeping it close to the face.
The 1 inch diameter of this Pro Value Series knob defines how it fits visually on cabinet faces, allowing it to sit neatly on narrower rails and stiles without overwhelming the profile. Its round shape, combined with a 3/4 inch projection, gives a consistent pull point that feels the same whether used on a left, right, or center-mounted door, which helps end users operate cabinets without hunting for a grip point. The 8-32 x 1 inch mounting screw size supports standard knob-through-door installation, so installers can use established drilling patterns and depths when laying out hardware runs. The weathered nickel finish works where a softer, worn-in appearance is desired, helping hardware recede slightly so the cabinet material and door style stay visually prominent in kitchens, baths, or shop cabinets.
The Classic Series weathered nickel knob fits cabinet doors and drawers where a traditional round pull is preferred, because its 1 inch diameter reads as familiar and proportional on face frames and full-overlay fronts. On smaller doors, that 1 inch footprint stays within stile boundaries, keeping the hardware from crowding edges or decorative profiles. The 3/4 inch projection defines the hand clearance, which supports repeated gripping on upper and lower cabinets without the knob catching on clothing or protruding too far into walk paths. Its weathered nickel finish visually pairs with other weathered nickel components on the same project, helping installers maintain a consistent finish set across hinges, pulls, and knobs. Zinc die cast construction keeps the knob weight moderate, so it adds minimal load to the screw connection and cabinet front during frequent opening and closing. The Pro Value Series designation identifies it as part of a coordinated series, which simplifies matching this knob to other Pro Value Classic Series items when building out a full room of cabinetry.
The specified 8-32 x 1 inch screw size gives installers a known thread and length to work with, which simplifies drilling and fastening routines on production cabinet lines and retrofit jobs. With a consistent screw size, jigs and templates set for 8-32 fasteners can be used across multiple cabinets, supporting faster layout without changing tooling. The 1 inch diameter and 3/4 inch projection are fixed dimensions, so when multiple knobs are lined up on drawer banks, their spacing and stand-off remain uniform, creating even sightlines across the run. The weathered nickel finish reduces the appearance of fingerprints compared with brighter, polished metals, which is helpful on frequently used kitchen or shop cabinets. Because the knob is zinc die cast, its formed shape remains consistent from piece to piece, allowing installers to align knobs by eye with confidence that profiles will match once installed. The Pro Value Classic Series identity provides a clear reference when specifying hardware, helping designers, buyers, and installers call out the same knob by name and part number SZCL1-WN on drawings and orders.
The SZCL1-WN knob has a stated length or diameter of 1 inch and a projection of 3/4 inch, which defines how large it appears on the door face and how far it stands off the cabinet.
The weathered nickel finish on this knob presents a softened metallic appearance, helping it coordinate with aged or brushed hardware and keeping reflections subdued on cabinet faces.
The Pro Value Classic Series knob is made from zinc die cast material, providing a consistent molded shape and a solid feel when doors and drawers are opened repeatedly.
This cabinet knob uses an 8-32 x 1 inch screw size, so the threaded connection and length align with common cabinet door and drawer thicknesses in many installations.
Cabinets with standard door and drawer widths suit the 1 inch diameter knob because its compact footprint fits on narrow stiles while still giving enough area for a comfortable pull.
The 3/4 inch projection sets the stand-off from the cabinet, allowing fingers to wrap behind the knob for grip while keeping the hardware close to the surface for a tidy profile.
The Pro Value Classic Series knob in weathered nickel combines a 1 inch diameter, 3/4 inch projection, and zinc die cast construction to support consistent cabinet operation across doors and drawers. Its 8-32 x 1 inch screw specification ties directly into common cabinet drilling practices, which helps streamline layout on both new installations and hardware changeouts. With the Classic Series styling and weathered nickel finish, this SZCL1-WN knob suits projects calling for a traditional round pull and a softened metallic tone on active kitchen, bath, or shop cabinetry.
Sold In: 1 Each
