Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Oil rubbed bronze cabinet knob identifies this Pro Value Classic Series knob as a 1-1/4 inch diameter pull in an oil rubbed bronze finish, giving cabinets and furniture a traditional look that matches many existing bronze hinges and pulls. The knob is made from zinc die cast material, which provides a solid feel in hand while maintaining consistent manufacturing tolerances across multiple doors and drawers on the same run. With a listed projection of 3/4 inch, this knob stands off the front just enough for a comfortable grip without catching on clothing in tight kitchen, bath, or shop spaces. The 1-1/4 inch diameter face spreads hand contact over a broader area, which helps users get good purchase on heavier drawers or doors. A width of 1-1/4 inch keeps the profile visually balanced on standard cabinet fronts.
The knob is specified with an 8-32 x 1 inch screw size, giving installers a standard machine thread that aligns with common cabinet door and drawer front drilling setups. Using the 8-32 thread simplifies work when replacing other 8-32 hardware, because existing drilled holes can stay in service while the front hardware changes. The 1-1/4 inch diameter footprint around the mounting point helps cover typical single-bore knob holes, which can be useful when updating cabinets where minor wear marks are present around the old knob location. With a projection of 3/4 inch off the door or drawer face, the mounting point remains close to the surface, which supports a firm feel when users pull on the knob.
This Pro Value Classic Series oil rubbed bronze 1-1/4 inch diameter knob fits naturally on cabinet doors, drawer fronts, and light furniture pieces where a round pull is preferred. The traditional oil rubbed bronze finish supports use on face-frame or frameless cabinets that call for a darker metal tone, helping unify the look across kitchens, baths, laundry rooms, or office built-ins. Because the width and diameter are both 1-1/4 inch, the knob presents a balanced circle that scales well on standard 15 to 24 inch wide doors and matching drawer fronts. The knob also suits furniture-style pieces, such as small chests or accent cabinets, where a modest 3/4 inch projection keeps the pull from dominating narrow faces.
The zinc die cast material makes this knob appropriate for multi-piece cabinet runs, because each unit follows the same casting pattern and dimensions from the Pro Value Series. That dimensional consistency helps keep centerlines straight when multiple doors or drawers line up across a wall of cabinetry. The 8-32 x 1 inch screw size aligns with commonly drilled through-holes in cabinet doors and some drawer fronts, so installers can work within standard drilling setups without special threading. From a workflow standpoint, knowing the projection is 3/4 inch allows planners to verify clearance between knob and nearby walls, appliances, or adjacent doors during layout, which supports smoother operation in tight installations.
The combination of 1-1/4 inch diameter and 3/4 inch projection defines how far this knob will extend into the user's hand, which influences both comfort and leverage during opening and closing. On tall pantry doors or wide drawer fronts, that diameter gives fingers enough edge to grab without slipping, which can reduce repeated pulling effort in busy environments. The matching 1-1/4 inch width confirms that the knob face is truly round, simplifying measurement from door edges during layout and helping maintain equal reveals between knobs on aligned doors.
Being part of the Pro Value Classic Series connects this knob to a consistent design family, useful when a project calls for repeating the same look across multiple rooms or phases. The oil rubbed bronze finish supports that continuity because each knob follows the same finish designation, helping maintain color and sheen uniformity across installations. The specified 8-32 x 1 inch screw size ties the front knob to a known fastener standard in cabinet work, which supports predictable thread engagement through typical door thicknesses. Identifying the knob by manufacturer part number SZCL8-ORB also helps installers and shops reorder the exact same model later, supporting maintenance work or future expansions that need the same dimensions and finish.
The SZCL8-ORB knob has a 1-1/4 inch diameter, 1-1/4 inch width, and 3/4 inch projection, so installers know exactly how much space it occupies on the cabinet face.
The Pro Value Classic Series knob is zinc die cast, providing a uniform casting that supports consistent sizing and appearance across multiple cabinets in the same project.
This 1-1/4 inch cabinet knob uses an oil rubbed bronze finish, giving projects a dark, classic metal tone that pairs with many bronze hinges and pulls.
The knob is specified with an 8-32 x 1 inch screw size, matching a common cabinet hardware thread standard for door and drawer front installations.
The oil rubbed bronze knob has a 3/4 inch projection, allowing comfortable finger clearance while keeping the pull close to the cabinet surface.
The SZCL8-ORB knob belongs to the Pro Value Classic Series, helping projects maintain a coordinated look when using matching decorative hardware from the same family.
The Pro Value Classic Series oil rubbed bronze 1-1/4 inch diameter knob combines a zinc die cast build, 3/4 inch projection, and 8-32 x 1 inch screw size, giving installers a defined set of dimensions and finish for consistent cabinet and furniture layouts. Choosing this SZCL8-ORB part number aligns door and drawer fronts to a single style and thread standard, which streamlines hardware planning across kitchens, baths, shops, or office cabinetry.
Sold In: 1 Each
