Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
classic pull 3 cc weathered nickel describes a Pro Value Classic Series cup pull with a 3 inch center to center mounting, which sets consistent handle spacing across doors and drawers so layouts line up cleanly. The 3-1/2 inch overall length defines the footprint on the face of the cabinet, helping plan rail widths and spacing from adjacent fronts. A 3/4 inch projection sets how far the pull stands off the surface, giving fingers room to grip while keeping the profile tight to the door. The 1-1/2 inch width shapes how the cup pull sits vertically, supporting comfortable contact when opening heavier fronts. The weathered nickel finish provides a muted metallic look that pairs with a wide range of cabinet finishes. Zinc die cast material provides a solid metal pull body, giving a firm feel every time the handle is used.
The 3 inch center to center layout establishes a fixed distance between mounting points, so installers can use standard templates or measured marks for drilling. With a 3-1/2 inch overall length, the pull offers slight overhang beyond the screw line, which helps visually center it on typical 2-1/2 to 3 inch rails. The 3/4 inch projection keeps the pull close to the face while still leaving finger clearance behind the cup profile. At 1-1/2 inches wide, the pull fits comfortably on common drawer front heights without dominating the panel, supporting balanced layouts on banks of drawers.
This Pro Value Classic Series cup pull, identified as SZCL10-WN, serves as a handle for cabinet doors and drawers that match its 3 inch center to center hole spacing, allowing direct use where that pattern is already drilled. The 3-1/2 inch overall length suits standard kitchen and bath cabinetry, because it spans enough width on a rail or drawer front to feel substantial without covering too much face area. With a 1-1/2 inch width, the pull sits well on narrower top drawers and also scales acceptably on mid-size drawer fronts. The 3/4 inch projection keeps the pull profile low, which works well on cabinets near walkways or tight clearances where deeper pulls might catch clothing. The weathered nickel finish supports projects aiming for a classic or gently aged metal look on face frames or frameless cabinet styles.
The 3 inch center to center measurement on this cup pull drives consistent hole spacing, which simplifies jig setup when repeating the same hardware across a full kitchen. Zinc die cast construction creates a uniform metal casting, so each pull in a run matches shape, which supports even sightlines along rows of drawers. The 3/4 inch projection keeps the pull close to the front, helping maintain a smooth overall cabinet profile while still leaving enough reach to comfortably grasp the cup. With a 1-1/2 inch width, the pull makes hand contact predictable, which matters when aligning multiple pulls on tall pantry doors or wide drawers. The weathered nickel finish creates a subdued metal tone that can help tie together hinges, knobs, and other visible metal components chosen in similar finishes.
The SZCL10-WN pull uses a 3 inch center to center spacing, so it matches cabinet fronts drilled on that 3 inch pattern for straightforward mounting or change-outs.
The Pro Value Classic Series cup pull measures 3-1/2 inches in overall length, 1-1/2 inches in width, and projects 3/4 inch, which defines its footprint on typical cabinet fronts.
The Classic Series SZCL10-WN pull is zinc die cast, giving it a solid metal body that supports a consistent feel across repeated cabinet openings.
This 3 inch center to center cup pull has a weathered nickel finish, providing a softened metallic appearance that works with many cabinet colors.
The 3/4 inch projection places the pull close to the door surface, keeping profiles streamlined while still allowing fingers to comfortably grip behind the cup edge.
The cup pull is specified with 8-32 x 1 inch screw size, which aligns with common cabinet drilling depths for through-bore handle installation.
The Pro Value Classic Series SZCL10-WN cup pull combines 3 inch center to center spacing, a 3-1/2 inch overall length, and a weathered nickel finish, aligning well with many cabinet layouts that use this standard pattern. Zinc die cast construction and a 1-1/2 inch width create a solid, comfortable grip area that suits both doors and drawers. For projects built around 3 inch handle spacing with a classic metal tone, this weathered nickel cup pull offers dimensions and finish that match common kitchen and bath cabinet designs.
Sold In: 1 Each
