Pro Value Classic Series knob describes a decorative knob from the Pro Value Series line that is built for cabinet and woodworking projects where a consistent look across jobs matters. The knob uses zinc die cast material, which creates a solid metal piece that handles regular opening and closing without changing its shape. Its oil rubbed bronze finish provides a dark, classic appearance that suits traditional cabinet designs where a warmer tone is preferred over bright metal. The 1-3/16 inch, or 30 mm, diameter forms a comfortable gripping area, so fingers can pull doors and drawers without slipping on a small edge. Matching 1-3/16 inch width keeps the knob visually balanced, which helps align multiple knobs in straight sight lines across doors and drawer fronts. A 1 inch projection sets the knob off the face just enough for a secure pull while staying close enough to avoid catching on passing clothing in tight spaces.
The 1-3/16 inch diameter defines the footprint of this oil rubbed bronze cabinet knob, which helps during layout when spacing knobs across door rails and drawer fronts. A 1 inch projection establishes how far the knob stands off the cabinet face, guiding drilling locations so fronts open without knuckles contacting the surface. The knob uses an 8-32 screw size, so drill and tap choices can be matched to that thread standard during installation. Because width also measures 1-3/16 inch, the knob presents a round plan view, which simplifies alignment since any rotation during mounting keeps the same appearance.
The 1-3/16 inch diameter knob from the Pro Value Classic Series works well on cabinet doors and drawers that need a moderate-size grip without looking oversized on standard fronts. Its oil rubbed bronze finish supports room designs that call for warm, dark hardware rather than bright chrome or stainless tones, tying in with bronze hinges or complementary fixtures. With a width that matches the diameter at 1-3/16 inch, the knob presents a clean circular profile, which suits both single-door runs and banks of drawers where visual repetition is important. The 1 inch projection keeps the handhold centered away from the cabinet face, so users can hook fingers behind the knob without straining against the door edge in everyday use. Because the knob belongs to the Classic Series within the Pro Value Series family, it suits projects that use other pieces from the same decorative hardware group to maintain a unified appearance across an entire installation.
The zinc die cast construction gives the knob a defined, repeatable shape, which helps installers seat each piece squarely against the cabinet surface for a uniform layout. The specified 1-3/16 inch diameter provides a fixed reference for measuring edge distances, allowing consistent placement from door stile edges or drawer top rails. A 1 inch projection offers a known stand-off dimension, so installers can coordinate knob positioning relative to adjacent doors, trim, or nearby walls to keep clearances consistent. The 8-32 screw size specification ties the knob directly to a common machine screw standard, which simplifies tool selection and drilling when preparing fronts. With oil rubbed bronze as the listed finish, color expectations remain clear across multiple orders, supporting repeat work where the same hardware look needs to be extended into additional rooms or future cabinet runs.
The SZCL3-ORB Classic Series knob uses zinc die cast material, which creates a solid metal part suited to repeated cabinet door and drawer operation.
The Pro Value Classic Series knob has a 1-3/16 inch diameter, a matching 1-3/16 inch width, and a 1 inch projection, setting its overall size and stand-off from the cabinet face.
The oil rubbed bronze finish gives the knob a dark, classic look, which supports cabinet designs that call for warm bronze-toned decorative hardware rather than bright metal.
This 1-3/16 inch cabinet knob is specified with an 8-32 screw size, so hole preparation and thread engagement can be matched to that machine screw standard.
The oil rubbed bronze cabinet knob has a 1 inch projection, setting the working distance from the door or drawer front for finger clearance.
This knob is identified by the manufacturer part number SZCL3-ORB and belongs to the Pro Value Classic Series, which simplifies ordering matching pieces later.
The Pro Value Classic Series knob in oil rubbed bronze combines a 1-3/16 inch diameter, 1 inch projection, and zinc die cast construction to support everyday cabinet use with a consistent feel. The 8-32 screw size and circular 1-3/16 inch width simplify layout and mounting across cabinet doors and drawers. With the SZCL3-ORB identifier clearly defining this model, it is straightforward to specify the same knob across current projects and repeat it on future work to maintain a unified Classic Series appearance.
Sold In: 1 Each
